当前位置:
X-MOL 学术
›
Indian J. Eng. Mater. Sci.
›
论文详情
Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)
Determination of the thermal properties of ternary Al-La-Ni cast alloy
Indian Journal of Engineering & Materials Sciences ( IF 0.615 ) Pub Date : 2022-08-16 Emin Çadırlı, Erkan Üstün
Indian Journal of Engineering & Materials Sciences ( IF 0.615 ) Pub Date : 2022-08-16 Emin Çadırlı, Erkan Üstün
In current work, thermal conductivity, enthalpy of fusion, specific heat, and thermal diffusivity of the Al-8.8La-1.2Ni cast alloy has been investigated. Chemical element analysis of the studied alloy was determined with X-Ray Fluorescence Spectrometer (XRF) and SEM microscopy with Energy Dispersive X-Ray Spectroscopy (EDS). Thermal conductivity of ascast Al-8.8La-1.2Ni alloy was measured using comparison cut bar method in the temperature range of 308–773 K. Thermal conductivityvalues decreased gradually in the studied alloy with the increase of temperature. The thermal temperature coefficient was calculated from the thermal conductivity-temperature graph. The heat flow-temperature curve was obtained by performing Differential Scanning Calorimetry (DSC) analysis. Enthalpy of fusion and specific heat values were also determined. Thermal diffusivity values were calculated as a function of temperature using the relevant equation. It was determined that the thermal diffusivity values increased with increasing temperature.
中文翻译:
三元Al-La-Ni铸造合金热性能的测定
在目前的工作中,研究了 Al-8.8La-1.2Ni 铸造合金的热导率、熔化焓、比热和热扩散率。用 X 射线荧光光谱仪 (XRF) 和 SEM 显微镜和能量色散 X 射线光谱仪 (EDS) 确定所研究合金的化学元素分析。铸态 Al-8.8La-1.2Ni 合金的热导率在 308-773 K 温度范围内使用比较切割棒法测量。随着温度的升高,研究合金的热导率值逐渐降低。由热导率-温度图计算热温度系数。通过进行差示扫描量热法(DSC)分析获得热流-温度曲线。还测定了熔化焓和比热值。使用相关方程将热扩散率值计算为温度的函数。已确定热扩散率值随温度升高而增加。
更新日期:2022-08-17
中文翻译:
三元Al-La-Ni铸造合金热性能的测定
在目前的工作中,研究了 Al-8.8La-1.2Ni 铸造合金的热导率、熔化焓、比热和热扩散率。用 X 射线荧光光谱仪 (XRF) 和 SEM 显微镜和能量色散 X 射线光谱仪 (EDS) 确定所研究合金的化学元素分析。铸态 Al-8.8La-1.2Ni 合金的热导率在 308-773 K 温度范围内使用比较切割棒法测量。随着温度的升高,研究合金的热导率值逐渐降低。由热导率-温度图计算热温度系数。通过进行差示扫描量热法(DSC)分析获得热流-温度曲线。还测定了熔化焓和比热值。使用相关方程将热扩散率值计算为温度的函数。已确定热扩散率值随温度升高而增加。