Abstract

To deal with residual stresses that arise after the application of the selective laser sintering method, in this article the heat treatment method according to the State Standard and vibration tumbling in a drum with ceramic “chips” are chosen. During operation, various vibrations occur, which lead to the destruction of the structure. To deal with vibrations of this kind, it is proposed to apply coatings to the structure. Such coatings increase the resistance to oxidation, corrosion, etc. In addition, they absorb vibrations (damping), thus removing resonance. At the same time, the service life of a coated product relative to an uncoated part is guaranteed to be 5–20% higher.

中文翻译：

---

SLM印刷方法获得的缩放设计的应用及阻尼涂层应用后处理的影响研究

摘要

针对选择性激光烧结方法应用后产生的残余应力，本文选择了国家标准的热处理方法和陶瓷“碎片”滚筒振动翻滚。在运行过程中，会发生各种振动，导致结构的破坏。为了应对这种振动，建议在结构上涂覆涂层。此类涂层可提高抗氧化、抗腐蚀等能力。此外，它们还可以吸收振动（阻尼），从而消除共振。同时，涂层产​​品的使用寿命相对于未涂层部件保证高 5-20%。