In recent years, cycling has become increasingly pointed out as one of the solutions for solving transportation problems in major metropolitan clusters. Thus, as the user base increases, there is also an increase in the number of adopters concerned about optimizing their effort during pedaling. This work, therefore, sought to develop a load cell that replaces commercial cycling shoe cleats. The transducer (with 6 degrees of freedom) was modeled after a Maltese cross type load cell, culminating in a two-part set formed by the transducer itself and a mounting base. They were built to measure forces and moments, fully characterizing the pedaling movement. As a result, a compact and portable system was obtained, which does not modify the user's pedaling characteristics, allowing freedom of movement and ease of change between bicycles (provided that the pedal system is compatible).

中文翻译：

---

建议使用基于鞋夹的新型称重传感器来测量骑车者施加的力和力矩

近年来，自行车越来越被认为是解决各大都市圈交通问题的解决方案之一。因此，随着用户群的增加，关注优化踩踏过程中力度的采用者数量也会增加。因此，这项工作试图开发一种替代商用自行车鞋夹板的称重传感器。该传感器（具有 6 个自由度）以马耳他十字型称重传感器为模型，最终形成由传感器本身和安装底座组成的两部分套件。它们旨在测量力和力矩，充分表征踏板运动。因此，获得了一种紧凑且便携式的系统，该系统不会改变用户的踩踏特性，从而允许自由移动并且易于在自行车之间进行更换（前提是踏板系统兼容）。