Commissioning and operation of the transverse collimation system at the RCS of CSNS,Journal of Instrumentation

当前位置： X-MOL 学术 › J. Instrum. › 论文详情

Our official English website, www.x-mol.net, welcomes your feedback! (Note: you will need to create a separate account there.)

Commissioning and operation of the transverse collimation system at the RCS of CSNS
Journal of Instrumentation ( IF 1.3 ) Pub Date : 2024-03-13 , DOI: 10.1088/1748-0221/19/03/t03004
Shouyan Xu , Kai Zhou , Jianliang Chen , Mingyang Huang , Sheng Wang

In high-intensity proton synchrotrons, controlling beam loss during machine operation is crucial to prevent radiation damage. Uncontrolled beam loss poses a significant challenge in achieving higher beam intensity and power in these synchrotrons. The beam collimation system plays a vital role in removing halo particles and localizing beam loss, serving as a critical tool for controlling uncontrolled beam loss in high-intensity proton accelerators. To address the issue of uncontrolled beam loss, a two-stage transverse collimation system was designed at the rapid cycling synchrotron (RCS) of China Spallation Neutron Source (CSNS). However, during the beam commissioning, it was found that the collimation efficiency was compromised due to the small ratio of the physical acceptance to the collimator acceptance and insufficient phase advances between the primary and secondary collimators. To address this issue, the designed two-stage collimator was modified to a one-stage collimator. Through optimization of the collimation system, the beam loss was effectively localized within the collimator area. As a result, CSNS achieved the design power of 100 kW with minimal uncontrolled beam loss.

更新日期：2024-03-13

点击分享查看原文

点击收藏

阅读更多本刊最新论文本刊介绍/投稿指南

全部期刊列表>>