样式: 排序: IF: - GO 导出 标记为已读
-
Application of hydrophobic selective stimuli‐responsive polymer membranes in organic pollutant treatment in aqueous phase J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-18 Zhenjie Gan, Shuxiu Ma, Yinlong Zhang, Yuzhou Wang, Wenbo Liu, Jiliang Cao, Na Li
Both hydrophobic and hydrophilic pollutions have damage on our environment, and it is necessary to remove them. However, the treatments for different water pollutions can be specific due to the hydrophobicity of various molecules. Therefore, it is important to separate pollutants with different hydrophobicity. In this work, we developed a diffusion separation method based on hydrophobicity selectivity
-
Long‐chain polyester dicarboxylic acid‐induced rapid transesterification chemistry of biobased epoxy system for improved self‐repairing performances J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-18 Shujun Zhao, Jiehao Qu, Shengjiong Yin, Xiangdong Liu, Hu Zhu
Constructing self‐repairing epoxy materials based on transesterification chemistry can be regarded as a potential path for practical industrial applications given on its simplicity and ease of processing. However, there is still a challenge to improve the slow bonding exchange process for desired healing performances. Herein, this work reports a simple and effective strategy to prepare high‐biomass‐content
-
Enhancing the performance of poly(ethylene oxide) solid electrolytes through synergistic interaction of starch and butanedinitrile J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-18 Tuo Zhao, Jingjing Yang, Lifan Cai, Wanxin Zhu, Xinming Wu, Le Shao
Solid polymer electrolyte (SPE) is one of the key materials being researched as the core component of all‐solid‐state lithium batteries, which are safer and helpful for higher energy densities. Although there has been extensive research, unifying electrochemical performance with environmental requirements is the new requirement of SPE. Here, natural and harmless starch is used as a filler to modify
-
Molecularly imprinted hydrazidine‐derived poly(acrylonitrile‐co‐divinylbenzene for enantio‐recognition of S‐fenoprofen J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-18 Abeer A. Alhawaiti, Fahad M. Almutairi, Nadia H. Elsayed
The drug fenoprofen (FN) is available in two forms, R‐ and S‐enantiomers, which need to be separated for optimal therapeutic use. A novel poly(acrylonitrile‐co‐divinylbenzene) (PNB)‐based polymer sorbent designed specifically for S‐fenoprofen (S‐FN) enantioseparation was synthesized. This process began with creating low cross‐linked PNB microparticles through suspension polymerization. Next, hydrazine
-
4D printing of dual‐responsive high‐performance shape memory polymer inspired by sunflowers J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-18 Wubin Shan, Lei Liang, Linmei Wu
A dual‐responsive shape memory polymer, inspired by the heliotropic behavior of sunflowers, holds promise for innovative research, amalgamating the distinctive traits of shape memory polymers with nature's sunflower dynamics. In this investigation, we crafted a heat and light dual‐responsive shape memory polymer through liquid crystal display 3D printing technology, employing a meticulously formulated
-
Development of co‐electrospun membrane composed poly(l‐co‐d,l‐lactic acid) and natural rubber with potential application in dermal dressing J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-18 Marcelo Formigoni Pinto, Bruna V. Quevedo, Daniel Komatsu, Stephen Christina de Moraes, Marcia Adriana Tomaz Duarte, Eliana Aparecida de Rezende Duek
Wound healing represents a global challenge for the healthcare system, resulting in substantial costs and physical and emotional impacts on individuals. There is an increasing demand for innovative alternatives to treat this condition. The co‐electrospinning technique enables the production of porous membrane composed of natural and synthetic polymers, which exhibit unique functions and adjustable
-
Ultra‐light fluorinated polyimide foams with excellent thermal insulation, low dielectric loss and high heat resistance J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-18 Jialin Jia, Yunlong Sun, Shuyan Zang, Heran Nie, Huafeng Zhou, Guangyuan Zhou
High efficiency thermal insulation materials are highly desirable in aerospace industry, whereas combining low density and low thermal conductivity of thermal insulation materials still remains a challenge. In this work, a series of fluorinated polyimide foams (PIFs) based on 4,4‐(hexafluoroisopropylidene) diphthalic anhydride (6FDA) were successfully prepared by microwave‐assisted powder foaming.
-
A novel hydroxyl‐rich polyvinyl alcohol hot‐melt adhesive with excellent ultra‐low temperature adhesion and reusability J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-18 Shiwen Li, Heng Zhang, Ziming Liu, Jian Cheng, Huayi Li, Chao Yan
Ethylene‐vinyl acetate (EVA) hot‐melt adhesives featured good thermal stability, strong weather resistance and fast bonding speed, are of great concern to the industry and engineering fields. However, the weak bond strength and poor reusability severely hinder their application under harsh conditions. Herein, the hydrolyzed EVA (EVOH) copolymers with rich hydroxyl groups are fabricated by an EVA hydrolysis
-
Sulfur and peroxide curing of NBR based rubber compounds filled with kraft lignin and calcium lignosulfonate J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-17 Ján Kruželák, Michaela Džuganová, Klaudia Hložeková, Andrea Kvasničáková, Aleš Ház, Richard Nadányi, Henrich Krump, Ivan Hudec
Rubber compounds based on acrylonitrile‐butadiene rubber were filled with biopolymer fillers, namely kraft lignin, and calcium lignosulfonate. For cross‐linking of rubber compounds, sulfur curing system, dicumyl peroxide, and combination of dicumyl peroxide with trimethylolpropane trimethacrylate were used. The main objective of the work was to investigate the influence of biopolymer fillers content
-
Synthesis and alkaline hydrolytic degradation of isosorbide‐based polycarbonates via incorporation of ethoxylated isosorbide as a comonomer J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-17 Hak Yong Lee, Suwan Myung, Won‐Ki Lee, Jae‐Chang Lee
Synthesis of polycarbonates (PCs) from isosorbide (ISB) monomers has been recently investigated. However, compared to bisphenol A, PCs face challenges in commercialization because their high rigidity renders it difficult to increase their molecular weight, resulting in high brittleness. To address these limitations, a flexible co‐monomer, ethoxylated ISB (EI5), was mixed with ISB to produce ISB/EI5‐based
-
Effects of biomaterial on the properties of waterborne intumescent fireproof coatings J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-17 Wang Zhan, Jinhong Mo, Xin Feng, Zhiyuan Xu, Lixia Li, Le Chen, Qinghong Kong, Qingwu Zhang, Mingyi Chen, Juncheng Jiang
Silk fibroin was used to enhance the properties of the fireproof coating, ensuring the safe evacuation of occupants in a fire accident. The effects of biomaterial on the properties of the coatings were investigated by fire protection test, thermogravimetric analysis, limited oxygen index, vertical flame test, water resistance test, and mechanical properties test. The carbon layers were characterized
-
Artificial neural networks for the accurate prediction of the thickness of fiber membranes prepared by airflow‐assisted electrostatic spinning J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-17 Zhenfeng Ma, Zhaoguang Zheng, Jun Zeng, Guodong Feng, Yihua Huang, Wenhui Luo, Minyou He, Jiaming Cui, Yi‐Jun Liang
The practical application of fiber membranes prepared by electrostatic spinning requires a uniform thickness. However, the parameters involved in the spinning process are highly complex, particularly when it comes to precise control over membrane thickness. Hence, achieving a consistent and homogeneous thickness for fiber membranes has posed significant challenges thus far. To accurately predict membrane
-
One‐step preparation of highly conductive eutectogel for a flexible strain sensor J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-17 Kaiqi Fan, Jiwei Peng, Wentong Yang, Xiaobo Wang, Sen Liu, Luxin Cao, Haijun Sun, Xiaojing Zhang
Gels with excellent ionic conductivity and resilience to temperature extremes are sought in practical applications due to their potential for building flexible and wearable soft electronics. In this work, highly conductive eutectogels are fabricated by one‐step polymerization of (3‐acrylamidopropyl) trimethyl ammonium chloride in deep eutectic solvents (DESs). Owing to the ion‐conductive polymer networks
-
Synthesis of diacylglycerol‐terminated lipid–polymer conjugates: Application to cell surface modification J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-17 Wenjin Wang, Chuanjiang Zhou, Jiangping Guo, Yijia Yu, Wenjuan Xia, Zhaoqiang Wu, Hong Chen
With the demand for the development of lipid–polymer conjugates (LPCs) for biomedical applications, the development of novel, rapid, and efficient methods for the synthesis of LPCs is of great significance. In this study, a novel Y‐type photoinitiator (Lipid‐PI) containing a diacylglycerol group was first synthesized, and then the polymerization of conjugated vinyl monomers such as oligoethylene glycol
-
Preparation and properties of pale‐colored and optically transparent fluoro‐containing polyimide films with low solar absorptivity and enhanced high‐temperature dimensional stability for potential applications in space environments J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-17 Zhenzhong Wang, Zhibin He, Xi Ren, Yan Zhang, Xiaolei Wang, Changxu Yang, Shujun Han, Haifeng Yu, Jin‐gang Liu
Two organo‐soluble polyimide (PI) resins were prepared from a tricyclic fluoro‐containing dianhydride 9,9‐bis(trifluoromethyl)xanthene‐2,3,6,7‐tetracarboxylic dianhydride (6FCDA) and aromatic diamine of 2,2‐bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane (BDAF) for PI‐IIa and 1,3‐bis(3‐aminophenoxy)benzene (133APB) for PI‐IIb, respectively. For comparison, two analogous PIs were prepared from 4,4′‐
-
Preparation and characterization of reprocessable poly(1,2,3‐triazolium) J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-17 Jun Zhang, Shuaikang Lv, Junkun Tang, Zuozhen Liu, Farong Huang
Poly(1,2,3‐triazolium) (PTAM) is a dynamic reversible crosslinking polymer based on 1,2,3‐triazolium. Structural rearrangement of PTAM can occur through dynamic exchange reactions of 1,2,3‐triazolium. But there are not any applications derived from the dynamic reversible crosslinking properties of 1,2,3‐triazolium. In the paper, to expand the function and application of PTAM, a reprocessable PTAM resin
-
Editorial Board, Aims & Scope, Table of Contents J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-16
-
Cover Image, Volume 141, Issue 20 J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-16 Jun Araki, Minami Nakajima
Wet spinning of chitin nanowhiskers: Effects of electrolyte composition in coagulation baths on mechanical properties and nanowhisker orientation by Jun Araki and Minami Nakajima. DOI: 10.1002/app.55335 image
-
Piezoresistive pressure sensor based on conductive MWCNTs@PANI fiber network for motion sensing and human–machine interface J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-16 Jingwei Zhou, Limei Zhang, Zhengyang Ji, Ruixiang Xu, Yi Jiang
-
Biobased and biodegradable imine vitrimers from epoxidized soybean oil as packaging J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-16 Milad Safarpour, Arkadiusz Zych, Maedeh Najafi, Giacomo Tedeschi, Luca Ceseracciu, Lara Marini, Giovanni Perotto, Athanassia Athanassiou
-
Enhancing the UV resistance and flame retardancy of epoxy resin composites with fluorescent carbon dots J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-16 Lingzhi Wang, Hua Liu, Haojie Wang, Birong Zeng, Xiaohui Liu, Yiting Xu, Weiang Luo, Guorong Chen, Conghui Yuan, Lizong Dai
-
Research on multiwalled carbon nanotubes spray method for preparing flexible piezoresistive tactile sensor J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-16 Xu He, Jiaqing Xie, Haoran Pang, Ruqian Sun, Tianfeng Zhou, Haiyan Fan, Xiaoyu Meng, Xiaohui Nan, Zhikang Zhou
-
Isocyanate‐chitin modified microspheres for chiral drug separation in high performance liquid chromatography J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-16 Zhen Zhang, Yue Wang, Shuai Lv, Hailin Cong, Youqing Shen, Bing Yu
-
Synthesis and properties of bio‐based environmental plasticizer derived from oleic acid for poly (vinyl chloride) J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-15 Wenyan Huang, Hui Nan, Jianzhe Ma, Kuiyun Dong, Jingjing Zhang, Guangxi Liu, Jian Wu, Caihong Xue, Shiai Xu, Heyan Zhong
-
Polyurethane‐based cross‐linked nano spheres and their application in toughening epoxy resin J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-15 Wei Shi, Jian Li, Ming Song, Yi Han, Chenyi Wang, Qiang Ren
-
Biogas purification by CO2 removal using facilitated transport mechanism of cellulose nanocrystals/polyvinyl alcohol layered hollow fiber membranes J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-15 S. Nithin Mithra, Sandeep S. Ahankari
-
Effect of NASCION‐Type ceramic dispersion in PAN/PVA‐based blend polymer electrolyte: A structural, thermal, and electrical study J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-15 Dharmendra Kumar, Shweta Mukherjee, Avirup Das
-
Molecular dynamics simulations of the solubility of chitosan grafted polyacrylamide and its adsorption mechanism with kaolinite: Impact of length and distribution of branched‐chain J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-13 Wei Zhao, Wenjie Zou, Fengyang Liu, Zhijun Zhang, Zhengyao Li, Ting Xiao
-
Highly dispersed biochar as a sustainable filler for enhancing mechanical performance and biodegradation of polybutylene succinate J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-13 Seungchan Noh, Dohyeong Kim, Gayeon Jeong, Jun Mo Koo, Jaseung Koo
-
Preparation and properties of self‐humidifying anodic gas diffusion layer with hydrophilic polymer material J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Haihang Zhang, Chongxue Zhao, Linfeng Han, Lin Zhang, Keyu Peng, Yingjie Song, Guangyi Lin
In this paper, an anodic gas diffusion layer (GDL) with a gradient hydrophobic structured microporous layer (MPL) was prepared using a spraying method. The hydrophobicity of the MPL was changed by adding polyvinylpyrrolidone to the MPL close to the catalyst layer side to obtain a bilayer MPL with a gradient hydrophobic structure. By performing the above operation, we designed a double‐layer MPL structure
-
Optimizing TPU performance: The role of mold temperature on injection molding of TPU J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Frederik Grønborg, David Bue Pedersen, Jon Spangenberg, Anders Egede Daugaard, Markus Lothar Susoff
This study explores the influence of mold temperatures below 60°C on thermoplastic polyurethane (TPU) properties during injection molding, focusing on phase separation and its impact on mechanical, thermal, and viscoelastic properties. Using a combination of micro‐indentation, temperature scanning stress relaxation, and conventional characterization methods, the research highlights how increased mold
-
Successful preparation of a biopolymeric nanocarrier enables controlled release of antinociceptive monoterpene for local pain management after transdermal barrier permeation J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Tatianny de Araujo Andrade, Jemmyson Romário de Jesus, Marcos Vinícius de Sousa Pereira, Paulo de Tarso Garcia, Maria Alice Pimentel Falcão, Cristiani Isabel Banderó Walker, Luiza Abrahão Frank, Mairim Russo Serafini
Developing effective and targeted drug delivery systems is crucial in searching for improved pain management strategies. Here, it is shown the preparation of a nanocarrier using chitosan hydrogel, and polymeric nanocapsules loaded with linalool for enhancing transdermal permeation and targeted delivery of this antinociceptive monoterpene for the pain treatment. Extensive characterization was conducted
-
Xanthan gum‐toughened hydrogel for durable strain and pressure sensors J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Yajun Wang, Yiyan Gao, Guanghui Gao
Ionic conductive hydrogels have caught much attention for serving as wearable sensors, however, most hydrogel sensors are difficult to be used for repeated sensing due to low toughness and poor self‐recovery. Here, tough and self‐recovery hydrogels are constructed by introducing xanthan gum into poly(acrylamide‐co‐trimethyl ammonium chloride) (P(Am‐DMC)) hydrogel network. Xanthan gum can bind with
-
Roles of hygrothermal aging temperature and time in degradation of the fracture toughness of highly cross‐linked epoxy J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Kushal Mishra, Aparna Singh
The evolution of plane‐strain fracture toughness in highly cross‐linked epoxies was assessed for different hygrothermal aging temperatures (25, 50, and 75°C) and durations (0–75 days). The absorption of water increased with hygrothermal aging, but at a diminishing rate and without saturating. A fraction of the absorbed water persisted despite prolonged drying. Thermogravimetric analysis revealed that
-
Preparation of polypropylene nanofibers reinforced multifunctional epoxy composite concrete with ultraviolet‐driven afterglow emission J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Ali Aldalbahi, Badr M. Thamer, Meera Moydeen Abdulhameed, Mohamed H. El‐Newehy
In order to develop smart concrete with afterglow emission, epoxy resin (EPX) was immobilized with nanoparticles of alkaline earth aluminate (NAEA) as a photoluminescent agent and electrospun polypropylene nanofibers (EPN) as a reinforcement agent. Scanning electron microscope images of EPN displayed diameters of 70–90 nm, whereas transmission electron microscopic images showed that NAEA has diameters
-
Molecular design and properties of P‐N‐B co‐intrinsic flame retardant thermosetting epoxy resin J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Hengxing Cheng, Junhong Guo, Yuan Ye, Tianjing Zhao, Jinfeng Cui, Baoping Yang, Bo Mu, Li Tian, Xuemei Bao, Xiujun Zhang, Yingping Zhou, Xiaohua Fu
Currently, epoxy resin (EP) is widely used in various fields, but its flammability greatly limits the wider application of EP. In recent years, additive flame retardants have been widely used to enhance the flame retardancy of EPs, but poor resistance to weather and aging is a prevalent issue encountered with additive flame retardants. To improve the weather fastness, researchers have successfully
-
A biomimetic mineralized collagen hydrogel containing uniformly distributed and highly abundant dopamine‐modified hydroxyapatite particles for bone tissue engineering J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Chun Yang, Guoying Li
In this study, hydroxyapatite (HAp)/mineralized collagen hydrogel composites were prepared by incorporating different amounts of dopamine‐modified HAp particles during the process of collagen self‐assembly and simultaneous mineralization. Zeta potential results showed that the surface charge of modified HAp particles was altered, and scanning electron microscopy patterns indicated that HAp particles
-
Real‐time dielectric monitoring of isothermal polymerization of methyl cyanoacetate and diethylene glycol dimethacrylate J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Haoran Yang, Fengquan Liu, Kongshuang Zhao, Jianjun Zhou, Lin Li
Dielectric spectroscopy (DS) was employed to monitor the isothermal polymerization processes of P(MCA‐DEGDMA) formed by the alternating copolymerization of methyl cyanoacetate (MCA) and diethylene glycol dimethacrylate (DEGDMA) at different temperatures in real time. P(MCA‐DEGDMA) is a polyether containing functional groups (O, CN, COOCH3) which can promote the transport of ions Li+, thereby having
-
Modification of hydrogenated nitrile rubber with N,N′‐bismaleimide‐4,4′‐diphenylmethane to improve its resistance to heat aging and reduce its compression set J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Mingjie Yao, Ping Tao, Liangyan Wang, Chunming Wang, Jiarui Hou, Yongliang Zhu, Dengchao Jiang, Yiwu Quan
This paper delves to improve the upper‐limit temperature of hydrogenated nitrile rubber (HNBR) through regulation of the vulcanization process, filler system and cross‐linking additive. The tensile test and scanning electron microscope images showed that the aging at 180°C significantly accelerated the deterioration in the property of HNBR compared with 150°C aging. The results showed that a higher
-
A stretchable flexible strain sensor with high sensitivity and fast response fabricated by embedded 3D printing of the hybrid polydimethylsiloxane/conductive carbon paste composites J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Yuan Xiao, Zhenlong Li, Chengan Hu, Leipeng Yang, Daicong Zhang
Flexible strain sensors are widely used in the fields of human motion monitoring, electronic skin, and soft robotics. In this work, to satisfy the demand for high‐sensitivity, low‐cost, and fast‐response flexible strain sensors for these fields, embedded 3D printing (E‐3DP) technology is employed to fabricate highly sensitive and fast‐responding flexible strain sensors. The effects of conductive carbon
-
Synthesis and characterization of novel D‐mannitol based hydrogel: Swelling and adsorption behavior of heavy metal ion studies J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-12 Arbind Chaurasiya, Poorn Prakash Pande, Ravi Shankar, Nandita Kushwaha, Praveen Kumar, Kajal Kumar Dey, Anil Chaurasiya
-
Moisture barriers used in firefighters' protective clothing: Effect of accelerated thermal aging on their mechanical and barrier performance J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-11 Laura Munevar‐Ortiz, John A. Nychka, Patricia I. Dolez
-
Preparation and application of the water‐based acrylic self‐polishing resin: Good storage stability, good film‐forming matrix of marine antifouling coatings J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-11 Yuhua Liu, Wenyan Liu, Shuqing Wei, Yuhao Yue, Lei Dong, Liangmin Yu, Guangling He
-
Flame retardant polyurethane microbubble elastomer based on ionic liquid/ammonium polyphosphate/aluminum hypophosphite ternary flame retardant system J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-10 Kai Liu, Xingtong Gao, Zhiyuan Liu, Wenjin Hu, Aixiang Li, Yanjun Xu, Wenjie Zhang
-
Effect of polyphenylene sulfide sulfone sizing agent on interfacial, thermal, and mechanical properties of carbon fiber J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-10 Yifan Zhuang, Haibin Liu, Shaoyang Zhou, Zhehao Jia, Ying Sun
-
Preparation of agar‐silica nanofilms through melt mixing: Extending beef shelf life through biodegradable packaging J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-10 Yovilianda Maulitiva Untoro, Yeyen Nurhamiyah, Bonita Firdiana, Rossy Choerun Nissa, Firda Aulya Syamani, Fateha Fateha, Dina Fransiska, Akbar Hanif Dawam Abdullah, I Made Arcana
-
Impact of the functionalized clay nanofillers on the properties of the recycled polyethylene terephthalate nanocomposites J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-10 Mariia Kostenko, Yurij Stetsyshyn, Khrystyna Harhay, Yuriy Melnyk, Volodymyr Donchak, Zoriana Gubriy, Milan Kracalik
-
Evaluation of the effect of the incorporation of poly(lactic acid) and maleic anhydride in the thermoshrinkage of films from thermoplastic starch J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-10 Camilo E. Montilla‐Buitrago, Rudy A. Gómez‐López, José F. Solanilla‐Duque, Héctor S. Villada‐Castillo
-
Effect of PCL chain length on rheological and mechanical properties of PCL‐PDMS‐PCL triblock copolymer films J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-10 Radha Sachan, Roli Purwar
-
Isopropanolamine‐modified ammonium polyphosphate for improved flame retardancy of epoxy resin J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-10 Yingbing Zou, Junjie Shi, Wenqi Cui, Zhehang Shi, Shuguang Yang, Fubin Luo, Hongzhou Li
-
Enhanced mechanical qualities of sericin‐removed silk by direct feeding of silkworms with cellulose nanofiber J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-10 Genki Kobayashi, Hiroki Kurita, Atsuhiko Nagasawa, Masatoshi Hori, Fumio Narita
-
EVA copolymer loaded with PAni/CNT/GNP hybrids: A flexible and lightweight material with high microwave absorption J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Loan F. Calheiros Souto, Bluma G. Soares
-
Effects of photodegradation performance with PLA‐containing samples on double injection molding J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Jiquan Li, Yikai Lin, Jun Xie, Liting Jing, Xiang Peng, Shaofei Jiang
-
Polylactic acid/epoxidized linseed oil/polypropylene grafted maleic anhydride: A promising combination of toughness and rigidity J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Elisangela Cordeiro, Alessandra A. P. Gabino, Ruan R. Henriques, Bluma G. Soares
-
High‐potent trifunctional polybenzoxazines coatings for superhydrophobic cotton fabrics and mild steel corrosion protection applications J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Harinei Srinivasan, Hariharan Arumugam, Balaji Krishnasamy, Kailasam Saravana Mani, Alagar Muthukaruppan
-
Tough and stretchable copolymer eutectogels constructed via in situ phase separation for flexible strain sensors J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Rui Wang, Linlin Wu, Yifeng Gao, Kaixuan Yu, Xiaofeng Ma, Xianli Fang, Ying Fang, Qiang Dou
-
Novel amphiphilic (AB)3‐type star block polymer: Synthesis and micellization study J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Saeideh Hamzeheipour, Abbas Rezaei, Hossein Behniafar
-
Chiral separation of D,L‐phenylglycine by cellulose triacetate membranes J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Hong‐Wei Zhao, Xue‐Fei Cui, Li‐Ming Yuan
-
Enhancing interface adhesion between waterjet‐produced rubber powders and natural rubber by wet‐mixing method J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Lei Guo, Gongxu Liu, Lichen Bai, Kuanfa Hao, Jinyang Zhao, Kexin Liu, Xingao Jian, Hailin Chai, Fumin Liu, Yuan Xu, Haichao Liu
-
Effect of long‐chain branching structures on supercritical CO2 foaming behavior of iPB‐1 with different crystalline form ratios J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-04-09 Zheng Gong, Weijie Li, Yichong Chen, Ling Zhao, Dongdong Hu