样式: 排序: IF: - GO 导出 标记为已读
-
Critical Heat Transfer Coefficients for Selection of Quench Media during Heat Treatment of Steels J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-23 Augustine Samuel, K. M. Pranesh Rao, K. Narayan Prabhu
-
Effect of Laser Surface Polishing on the Surface Characteristics, Tribological, and Mechanical Behavior of 3D-Printed Acrylonitrile Styrene Acrylate Parts J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-22 A. Captan Prabakaran, P. Senthil, T. Sathies
-
Simultaneous Enhancement of Thermal Conductivity and Mechanical Properties of EZ42 Magnesium Alloy by Ca Microalloying J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-22 Yong Zhang, Xiaogang Wang, Liangshun Huang, Chunbo Zhao, Weili Li, Hong Li, Chengkai Yu, Tao Liu
-
In Situ Analysis of Stress and Microstructure Evolution during Welding of High-Alloy Steels Using Energy-Dispersive X-Ray Diffraction J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-22 Nico Hempel, Thomas Nitschke-Pagel, Manuela Klaus, Daniel Apel, Christoph Genzel, Klaus Dilger
-
Sustainability of Existing Phase of Extruded Fiber-Reinforced Polylactic Acid under Dynamic Shock Loading Conditions J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-22 G. Sakthi Balan, S. Aravind Raj
-
Reconstruction of Numerical Models for Mechanical Performance of Artificially Rusted Steel Subjected to High Temperatures J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-22 Zhen Guo, Jingjing Zhou, Xiangren Wang, Fumin Li, Fengjie Zhang
-
Influence of MoS2-Based Nanofluid Minimum Quantity Lubrication on Machining Performance of AISI 316L Stainless Steel J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-22 Anandita Singh, Aruna Thakur, Soumya Gangopadhyay
-
Study of Design and Microstructure Properties of Laser Clad Multiphase Coupled Nickel-Based Self-Lubricating Coatings J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-22 Dusheng Sun, Yong Yang, Zheng Liu, Jianyu Han, Shutao Ma, Bin Xu, Mingyu Yuan
-
Residual Stress Distribution in Sapphire/Ti6Al4V Alloy Joints Brazed with CuTi+B Composite Fillers J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-19 H. S. Yuan, H. Li, Y. Y. Wang, M. Q. Li
-
Effect of Rare Earth Lanthanum Addition on Microstructure and Properties of Pure Titanium J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-18 Yuanyuan Zhu, Yechen Deng, Yixin An, Ruoyu Liu, Lanyi Liu, Ziqi Wang, Bingfeng Wang
-
Effect of Surface Nano Structuring on Corrosion and Tribocorrosion Behavior of Ti6Al4V Alloy in Simulated Body Fluid J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-18 Kumar Subham, Ankur Kumar, Anshul Kamboj, G. P. Chaudhari
-
Effects of V Element and Heat Treatment Process on Microstructure and Mechanical Properties of Additive Manufacturing of Titanium Aluminum Alloy Using Flux-Core Arc Welding Wire with TiH2 Powder J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-18 Yuzhao Lv, Ting Wang, Lianfeng Wei, Liang Zhang, Bo Yuan, Zhichao Chen
-
Synergistic Effect of Sc and Excess Mg on the Microstructure and Mechanical Properties of Hypoeutectic Al-10Mg2Si Alloy J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-18 Xiaofeng Wu, Fufa Wu, Jikang Qin, Rongda Zhao
-
Mechanical Properties of Recycled Carbon Fiber-Reinforced Resin Composites 3D Printed via Digital Light Processing J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-17 Frederico de Castro Magalhães, Juan Carlos Campos Rubio
-
Effects of Trace La on the Aging Properties of the Cu-Ti-Zr Alloys J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-17 Nengneng Wang, Meng Zhou, Baohong Tian, Jin Zou, Ke Jing, Haoyan Hu, Yi Zhang, Qian Bai, Caijiao Tian, Xu Li, Alex A. Volinsky
-
Surface Strengthening of Aerospace Material of Inconel 718 by GOV (Flow Peening) Process J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-16 Mehmet Hanifi Doğru, Murat Kalak, Burak Şahin, Eyüp Yeter, Kursad Gov
-
Influence of Heat Process on Microstructure and Mechanical Properties of DD5 Single Crystal Superalloy During Manufacturing J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-16 Shujuan Ma, Lei Cao, Xuezhi Wang, Xin Zhuang
-
Oxidation Behavior of Ni-Based Oxide Dispersion-Strengthened Alloy Fabricated by Direct Energy Deposition at 1100 °C J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-16 Changyu Ma, Bruce S. Kang
-
Comparative Analysis of Microstructure Evolution and Mechanical Properties of Dissimilar Welded Joints of AA7075/AA6061 via Friction Stir Welding, Tungsten Inert Gas Welding, and Tungsten Inert Gas + Friction Stir Processing J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-16 Rajeev Rana, D. B. Karunakar, Anish Karmakar, Thomas Mathew
-
The Role of Microstructure in the Gradient of Tensile Properties through Thickness in 7449 Aluminium Alloy Thick Plate J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 J. A. Heredero, J. Medina, J. M. Antoranz, P. Adeva
-
Modeling Direct Quenching Effects on Microstructural Evolutions in AISI 4140 Steel: A Finite Volume Approach J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 Amirhossein Meysami, Goodarz Ahmadi, Alex Meisami
-
Preparation of Bronze (CuSn10) Parts by Material Extrusion Process Using Paraffin-Based Binder J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 Kai Jin, Gemin Li, Bangzheng Wei, Ruizhi Chen, Pengqi Chen, Jigui Cheng
-
Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 G. Rajesh Kannan, P. Sathiya, T. Deepan Bharathi Kannan, M. Umar
-
Microwave Absorption Properties of Flaky Carbonyl Iron @ Fe3O4 Produced by Plasma-Assisted Ball Milling J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 Xian Liu, Na Liu, WanTing Xu, Meiqin Zeng, Zhongchen Lu
-
Analysis of Microstructural Transformations Induced by Thermal Aging of Co-Cr-Ni-W-C Alloy Deposits and Their Impact on Corrosion Behavior in a 3.5% NaCl Medium J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 Abdelaziz Sellidj, Rym Mekideche, Bachir Zaid
-
Investigation of Electrochemical and Thermal Properties of Ti50Ni40−xZr10Nbx SMAs J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 Shakhawan Salih Abdullah, Esra Balci, Ibrahim Nazem Qader, Fethi Dagdelen
-
Investigation of the Combined Effects of Stress Concentrations and Plasma Nitriding Parameters on the Fatigue Performance of AISI 4140 Low Alloy Steel J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 F. Yılan, H. Kovacı
-
Modeling the Effects of Tool Pin Configurations and Friction Stir Processing Parameters on Tungsten Inert Gas Welded Dissimilar Aluminum Alloy Joints J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-15 Md Saquib Bin Reyaz, Amar Nath Sinha
-
-
Austempering and Bainitic Transformation Kinetics of AISI 52100 J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-12 Haoxing You, Mei Yang, Yishu Zhang, Richard D. Sisson
-
Research on Regulation Mechanism of TiO2 Photocathodic Protection Based on Cohesive Energy, Defect Patterns, and Nanofilm Size J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-12 Wan Sun, Guoqing Gou, Xiang Qiu, Qingguo Feng, Kun Zhang, Shuzhi Qin, Wei Gao
-
Multi-objective Optimization in Selective Laser Melting of AlSi10Mg Alloy Based on Response Surface Methodology J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-12 Junsong Liu, Yan Shi
-
Microstructural Characteristics and Mechanical Properties of Friction Stir Welded 2219 Aluminum Alloy Plate After Spinning and Heat Treatment J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-12 Z. L. Chang, M. H. Huang, X. B Wang, J. Q. Pan, G. D. Sun, J. L. Yang, L. Zhou, W. C. Zhang, L. H. Zhan
-
The Oxidation Behavior of Spark Plasma Sintered Ti-48Al Alloys J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-12 P. S. Sankara Rama Krishnan, K. P. Davidson, X. Xu, S. W. Chan, Z. Tsakadze, M. Duchamp, R. V. Ramanujan
-
Enhanced Performance of AA7075/SiC/ZrC Hybrid Composite through Microwave Assisted Powder Metallurgy Techniques J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-10 Guttikonda Manohar, Adepu Kumar, M. V. N. V. Satyanarayana, Penchal Reddy Mattli, Abhijit Bhowmik
-
Residual Stress in Cold Spray SS304L Measured Via Neutron Diffraction and Comparison of Analytical Models to Predict the Residual Stress J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-10 Christopher M. Roper, Chris M. Fancher, Jeffrey R. Bunn, Luke N. Brewer
-
Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of P91 Heat-Resistant Steel Coating on Mild Steel J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-10 Rui Wang, Longlong Zhu, Huiling Liu, Jiaqing Du, Hui Liu, Lei Hu
-
Regularization of Hole-Drilling Residual Stress Measurements with Eccentric Holes: An Approach with Influence Functions J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-10 M. Beghini, L. Bertini, M. Cococcioni, T. Grossi, C. Santus, A. Benincasa
-
Effect of Friction Time on Temperature Distribution, Plastic Flow, Microstructure, and Properties in Friction Welding of 1045 Carbon Steel and AISI 430 Ferritic Stainless Steel J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-09 Yongfang Deng, Kun Cao, Yutao Zhou, Liang Hu, Yangxin Ou, Jincheng Zeng, Zihang Li
-
Effect of Heat Treatment on Microstructure and Wear Behavior of Laser Clad FeCoCrMoNi High-Entropy Alloy Coatings J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-09 Mingtao Ma, Sainan Nie, Huishu Yu, Guoxuan Huang, Xin Wang, Nannan Zhang
-
Microstructure, Mechanical Properties, and Sintering Behavior of Ti3O-Fe2TiO4-TiC Composites J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-09 Tingting Zhang, Kangyan Fan, Yi Xu, Xinghua Yang, Yonghong Fu
-
Microstructure and Micro-texture Development of Variable Frictional Heat Input Friction Stir Welded Joints of Laser Powder Bed Fusion-Made AlSi10Mg Plates J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-09 Navdeep Minhas, Varun Sharma, Shailendra Singh Bhadauria
-
Correlation Between Pressureless Sintering, Microstructure, and Properties of ZrB2-SiC-Y2O3 Composites J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-08 S. Sarkar, M. K. Mondal, M. Mallik
-
Penetration Characteristics of Ceramic/Metal Composite Armor Impacted by Different Projectiles J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-08 Ming-hui Ma, Guang-fa Gao, Xiao-dong Wang, Yi-ding Wu
-
Single-Step Combustion Synthesis of Cerium Aluminate in the Presence of Copper J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-08 Stanislav Kurajica, Katarina Mužina, Leonard Bauer, Filip Brleković
-
Effect of Pre-tempering and Double Normalizing on Microstructure and Mechanical Properties of Low Activation Steel J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-08 Guo-xing Qiu, Bing-rui Su, Jia-ning Li, Xu-li Wei, Yong-kun Yang, Xiao-ming Li
-
Research on Electrochemical Corrosion and Passive Behavior of CoCrFeNi High-Entropy Alloy Compared with 304 Stainless Steel in a NaCl Environment J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-08 K. X. Xu, M. Zhu, Y. F. Yuan, S. Y. Guo
-
Enhancing Predictive Capabilities: Machine Learning Approaches for Predicting Mechanical Behavior in Friction Stir Welded Aluminum Alloys J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-08 Abdelhakim Dorbane, Fouzi Harrou, Bekir Dursun, Ying Sun
-
Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-08 Yazhong Zhai, Hongyan Che, Xikou He, Hansheng Bao
-
Biological and Corrosion Barrier Characteristics of Electrophoretically Obtained Zinc Oxide/Bioactive Glass Composite Coating on Treated AZ31 Mg Alloy: Toward Further In Vitro Study J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-08 F. Aghili, K. Raeissi, B. Hoomehr, M. Kharaziha, S. Salehi
-
Residual Stress Distribution in Aluminum/Polypropylene/Aluminum Sandwich Laminates in U-Channel Draw Bending J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-05 Caroline Kella, Pankaj K. Mallick
Residual stresses in sheet metal parts are internal stresses that remain after the release of elastic strains at the end of metal forming operations. When the formed sheet metal part is removed from the forming tools, it not only springs back but also acquires a through-thickness residual stress distribution. Residual stresses for monolithic aluminum sheets and aluminum/polypropylene/aluminum sandwich
-
Evaluation of Tensile Properties and Formability of Al 6061 Alloy Processed by Various Semi-solid Techniques J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-05 Mostafa Karamouz, Seyed Mohammad Jesmani
Three different semi-solid processes including conventional strain induced melt activation (SIMA), SIMA plus annealing, and a new two-stage SIMA (TSSIMA) were conducted on Al 6061 alloy and their effects on the microstructure, tensile strength, elongation, and formability of the alloy were investigated. The results showed that TSSIMA led to the most appropriate microstructure owing to grain refinement
-
Validation of Finite-Element Plasticity Models Using Full-Field Surface Strain Measurements J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-05 Scott Carlson, Marcus Stanfield, Marcias Martinez, Keith Hitchman, David Backman
Fastened joints still represent the most common method for joining components within the aerospace industry. For fastened joints that experience high cyclical stresses, the application of the Split Sleeve Cold Expansion (SsCxTM) process has proven to be highly effective in extending the total fatigue life. This paper provides experimental strain measurements from around holes subjected to the SsCxTM
-
Surface CuAl9Mn2/W Composites Prepared by Multipass Friction Stir Processing: Microstructures, Phases, and Mechanical and Tribological Properties J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-04 Andrey Cheremnov, Anna Zykova, Nickolai Savchenko, Evgeny Knyazhev, Natalya Semenchuk, Denis Gurianov, Andrey Vorontsov, Veronika Utyaganova, Andrey Chumaevskii, Evgeny Kolubaev, Sergei Tarasov
-
Effect of Grain Size and Dislocation Density on the Work Hardening Behavior of SS 304 J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-02
Abstract In the present investigation, grain size and dislocation density in SS 304 metastable austenitic stainless steel were varied by annealing the as-received steel at 1025 °C for 120 and 360 min. Effect of dislocation density and grain size on the work hardening behavior, evolution of deformation-induced martensite, and kinetics of deformation-induced transformation has been systematically studied
-
Microstructure and Properties of Coarse Grain Zone in Single-Pass Welding of V-N Microalloyed Steel J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-02 Yue Liu, Xiao-Ming Zheng, Qiu-Ming Li, Peng-Yu Liu, Hong-Chao Ji, Lin-Xiu Du
The single-pass welding thermal simulation test of V-N micro-alloyed steel was carried out by MMS-300 thermal simulation testing machine, and combined with an optical microscope (OM), electron backscattering diffraction, impact test, and other technologies, to study the organization, toughness, and its change rule of critical reheating coarse-grained heat-affected zone under different welding conditions
-
Developing Fittingly Comprehensive Performance Carbon Nanotube/Mg-6Zn Sheets with Substantial Enhancement in Formability J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-02
Abstract To prevent the occurrence of edge crack in Mg alloy sheet during conventional rolling process, a three-step technique was proposed for the production of carbon nanotubes-reinforced sheet Mg composites (CNTs/Mg-6Zn), and the microstructure and mechanical properties of the resulting composites were studied. The procedure involves pre-treatment of CNTs, followed by the ultrasonic-assisted stirring
-
Fatigue Damage Behavior and Mechanism Research of 2198 Aluminum–Lithium Alloy Sheet with Error Holes J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-02 Yajun Chen, Tao Yuan, Zifan Cui, Zichen Zhang, Y. F. Zhou, Da Guo
In this paper, we investigated the impact of manual drilling in the actual production process on the structural material properties of the airframe. Specifically, we focused on elliptical and inclined holes and studied the effects of different parameters on the fatigue life of 2198-T8 skin sheets using Digital Image Correlation. Through our experimental tests, we found significant correlations between
-
Effects of Laser Powder Bed Fusion Process Parameters on Porosity, Liquid Retention, and Thermal and Surface Properties for 316L, CoCrW and Ti6Al4V Alloys J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-01
Abstract Laser powder bed fusion (LPBF) offers several key advantages, including design flexibility, the ability to produce complex geometries and the fabrication of porous materials. These advantages have greatly expanded the range of applications for products manufactured using LPBF. Recently, there has been a significant increase in the use of LPBF products in thermal applications. In these applications
-
A Comprehensive Investigation on Nanomechanical, Scratch, and Tribological Characteristics of TaN-Ag Nanocomposite Coating on Ti6Al7Nb Alloy J. Mater. Eng. Perform. (IF 2.3) Pub Date : 2024-04-01 Vivek Singh, Rajesh Kumar Sharma, Rakesh Sehgal
This investigation explores the improvement in mechanical and tribological properties of the Ti6Al7Nb alloy by depositing TaN-Ag (0.5 at.%) nanocomposite coating using magnetron sputtering. The structural properties, morphology, elemental composition, and surface roughness of nanocomposite coating were studied. The effect of nanoindentation load on the hardness (H) and modulus (E) of the substrate