-
Carrier-free poly(glycyrrhetinic acid)-facilitated celastrol-loaded nanoparticle for high-efficiency low-toxicity treatment of rheumatoid arthritis Mater. Des. (IF 8.4) Pub Date : 2024-04-16 Wenjing Zhang, Yuan Huang, Jing Li, Mei Zhou, Weijun Huang, Li Sun, Shuangying Gui, Zhenbao Li
-
Insight into the Ta alloying effects on the oxidation behavior and mechanism of cast TiAl alloy Mater. Des. (IF 8.4) Pub Date : 2024-04-16 Zitong Gao, Rui Hu, Hang Zou, Mi Zhou, Xian Luo
-
Multifunctional hybrid plate lattice structure with high energy absorption and excellent sound absorption Mater. Des. (IF 8.4) Pub Date : 2024-04-15 Lingbo Li, Fan Yang, Yabin Jin, Pengfei Li, Siyuan Zhang, Kun Xue, Guoxing Lu, Hualin Fan
-
Designing high-efficiency red-emitting Mg2In1-zSczSbO6:Mn4+,Li+ phosphors for plant growth lighting Mater. Des. (IF 8.4) Pub Date : 2024-04-14 Weixi Xia, Liang Liang, Qinan Mao, Yang Ding, Meijiao Liu, Jiasong Zhong
-
Low-temperature precipitation strengthening of maraging steel 1.2709 produced by powder bed fusion Mater. Des. (IF 8.4) Pub Date : 2024-04-13 Ludmila Kučerová, Anna Benediktová, Karolína Burdová, Dagmar Jandová
-
Controllable preparation of metal-based lubrication coatings in extreme environmental applications Mater. Des. (IF 8.4) Pub Date : 2024-04-13 Shuai Wu, Yuening Tang, Jie Gu, Ruiteng Li, Yu Liang, Pingli Liu, Haixin Wang, Cuihua An, Qibo Deng, Libin Zhao, Ning Hu
-
Unraveling the mechanism for thermal stability of a high-strength Cu alloy produced by a novel cryogenic ECAP route Mater. Des. (IF 8.4) Pub Date : 2024-04-12 P.H.F. Oliveira, D.C.C. Magalhães, C.A. Della Rovere, O.M. Cintho, A.M. Kliauga, V.L. Sordi
-
Revealing microstructural degradation mechanism induced by interdiffusion between Amdry365 coating and IN792 superalloy Mater. Des. (IF 8.4) Pub Date : 2024-04-12 Xiaoyu Sun, Xiaolong Li, Sheng Guo, Xin Yu, Lilong Zhu, Jianwei Teng, Liang Jiang, Johan Moverare, Xin-Hai Li, Ru Lin Peng
-
Nanomaterials for advanced energy applications: Recent advancements and future trends Mater. Des. (IF 8.4) Pub Date : 2024-04-12 Osama Gohar, Muhammad Zubair Khan, Iram Bibi, Nadia Bashir, Urooj Tariq, Manahil Bakhtiar, Muhammad Ramzan Abdul Karim, Farman Ali, Muhammad Bilal Hanif, Martin Motola
-
Impact toughness and fracture propagation mechanism of NiAl precipitation-strengthened HSLA steels Mater. Des. (IF 8.4) Pub Date : 2024-04-11 Xiangyun Zhang, Jialong Wang, Tao Zhou, Ling Yan, Hao Yu
-
Machine learning and feature representation approaches to predict stress-strain curves of additively manufactured metamaterials with varying structure and process parameters Mater. Des. (IF 8.4) Pub Date : 2024-04-10 Qingyang Liu, Dazhong Wu
-
Effect of interrupted cooling on microstructural evolution and microhardness of FGH97 nickel-based PM superalloy Mater. Des. (IF 8.4) Pub Date : 2024-04-10 Yun Zeng, Hengyong Bu, Peikai Li, Chao Wang, Shaohong Li
-
Influence of vanadium-carbide precipitation on the deformation behavior of Fe-30Mn-10Co-10Cr-2.5 V-1.5C multi-principal element alloy Mater. Des. (IF 8.4) Pub Date : 2024-04-10 Felix Oppermann, Fabian Kies, Mehdi Noori, K.G. Pradeep, Bengt Hallstedt, Christian Haase
-
Design and characterization of (TiZr)95-xHfxMo5 multi-principal element alloys with excellent properties for biomedical applications Mater. Des. (IF 8.4) Pub Date : 2024-04-10 Qihang Xv, Zheng Li, Weiji Lai, Zhiguo Zhang, Xincheng Xu, Binbin Wang, Chen Zhong, Deqiang You, Xiaojian Wang
-
Additively manufactured steel reinforcement for small scale reinforced concrete modeling: Tensile and bond behavior Mater. Des. (IF 8.4) Pub Date : 2024-04-10 Medhat Elmorsy, Rafal Wrobel, Christian Leinenbach, Michalis F. Vassiliou
-
Search for eutectic high entropy alloys by integrating high-throughput CALPHAD, machine learning and experiments Mater. Des. (IF 8.4) Pub Date : 2024-04-09 Yingzhi Zeng, Mengren Man, Chee Koon Ng, Zachary Aitken, Kewu Bai, Delvin Wuu, Jing Jun Lee, Si Rong Ng, Fengxia Wei, Pei Wang, Dennis Cheng Cheh Tan, Yong-Wei Zhang
-
The reverse transformation mechanism of β phase and its stability of Ti-6Al-4V alloy fabricated via laser powder bed fusion Mater. Des. (IF 8.4) Pub Date : 2024-04-09 Wenjing Zhang, Leilei Xing, Shubo Zhang, Kai Wang, Junyu Chen, Jinhan Chen, Gang Fang, Wei Liu
-
Study on interfacial healing mechanism of a Ni-Co base dual-phase superalloy during hot-compression bonding Mater. Des. (IF 8.4) Pub Date : 2024-04-09 Shaofei Ren, Xiaolong Bai, Sheng Liu, Mingyue Sun, Bin Xu, Chuanyong Cui, Guangcai Ma
-
Unlocking the Dual Helical Ribbon for rotational viscosity measurements of highly heterogeneous fluids Mater. Des. (IF 8.4) Pub Date : 2024-04-08 G. Giancontieri, D.M. Hargreaves, P. Partal, D. Lo Presti
-
Coupling hot isostatic pressing and laser powder bed fusion: A new strategy to manufacture defect-free CuCrZr-316L steel multi-material structures Mater. Des. (IF 8.4) Pub Date : 2024-04-08 L. Deillon, N. Abando Beldarrain, X. Li, M. Bambach
Multi-material laser powder bed fusion (PBF-LB) offers new design opportunities by combining multiple materials into complex 3D shapes. However, for combinations with large differences in thermal, physical or elastic properties, avoiding interfacial defects is challenging. Combining Cu alloys with stainless steel is appealing for components necessitating high thermal / electrical conductivity in some
-
Mechanistic machine learning for metamaterial fatigue strength design from first principles in additive manufacturing Mater. Des. (IF 8.4) Pub Date : 2024-04-08 Mustafa Awd, Lobna Saeed, Sebastian Münstermann, Matthias Faes, Frank Walther
Digital control in manufacturing processes produces significant amounts of metadata. The production process metadata, such as thermal and optical measurements, enables a higher degree of property grading than uninstrumented manufacturing and feedback for fault detection. This study explores how metadata can design fatigue-resistant structures using physically grounded models such as density functional
-
A correlative approach to evaluating the links between local microstructural parameters and creep initiated cavities Mater. Des. (IF 8.4) Pub Date : 2024-04-06 S. He, E. Horton, S. Moore, E. Galliopoulou, P.J. Thomas, A. Fernandez-Caballero, E. Elmukashfi, M. Salvini, M. Mostafavi, D.M. Knowles, P.E.J. Flewitt, T.L. Martin
The study and modelling of material degradation processes, such as the initiation and growth of creep cavities in high-temperature applications, require a correlative and comprehensive knowledge of the microstructure. However, individual microscopy is limited to a small region and specific microstructural information of the specimen. This work demonstrates a novel correlative microscopy approach for
-
Bioinspired compliant joints for passive-automatic adaptability Mater. Des. (IF 8.4) Pub Date : 2024-04-05 Ali Khaheshi, Preenjot Singh, Silvio Lavandeira, Stanislav Gorb, Hamed Rajabi
-
Enhancing the fracture properties of carbon fiber-calcium silicate hydrate interface through graphene oxide Mater. Des. (IF 8.4) Pub Date : 2024-04-05 Benzhi Min, Guoliang Chen, Yongyang Sun, Ke Li, Xi Chen, Zhenqing Wang
-
A 3D-printed bioactive glass scaffold coated with sustained-release PLGA/simvastatin stimulates calvarial bone repair Mater. Des. (IF 8.4) Pub Date : 2024-04-04 Kuan-Yu Chiu, Jian-Yuan Huang, Ying-Hui Su, Shih-Fu Ou, Ker-Kong Chen, Yan-Hsiung Wang
-
Axisymmetric non-planar slicing and path planning strategy for robot-based additive manufacturing Mater. Des. (IF 8.4) Pub Date : 2024-04-04 Adrián López-Arrabal, Álvaro Guzmán-Bautista, William Solórzano-Requejo, Francisco Franco-Martínez, Mónica Villaverde
-
Facile construction of gold- and BODIPY-coordinated liposomal nanocomplexes for enhanced photothermal therapy of cancer Mater. Des. (IF 8.4) Pub Date : 2024-04-04 Yuran Wang, Xudong Li, Ya Wang, Haijun Chen, Yu Gao, Yuxiang Lin
-
Enhanced compressive properties of additively manufactured hollow sphere materials with novel configurations Mater. Des. (IF 8.4) Pub Date : 2024-04-03 Meiling Dai, Zhuoli Chen, Weiyi Hu, Cheng Cheng, Zhongyu Lu
-
Sustainable gambogic acid release via pH/Redox Dual-Responsive C60-Modified magnetic mesoporous nanospheres for antitumor therapy Mater. Des. (IF 8.4) Pub Date : 2024-04-02 Wei-wei Huan, Mengyang Dong, Ziling Chang, Huafei Li, Wei Liu, Yuxiang Yang, Hongmin Yuan, Yan Huang, Wenwen Liu, Riccardo Carlini, Mo Chen
-
Design and macroscopic mechanical responses of auxetic metamaterials with tunable stiffness Mater. Des. (IF 8.4) Pub Date : 2024-04-02 Shangbin Wang, Junxian Guo, Andras Biczo, Ning Feng
-
Lightweight cellular multifunctional metamaterials with superior low-frequency sound absorption, broadband energy harvesting and high load-bearing capacity Mater. Des. (IF 8.4) Pub Date : 2024-04-02 Zhenqian Xiao, Penglin Gao, Xiao He, Yegao Qu, Linzhi Wu
-
Numerical simulation on transport-crystallization-mechanical behavior in concrete structure under external sulfate attack and wetting–drying cycles Mater. Des. (IF 8.4) Pub Date : 2024-04-02 Zi-Qi Shan, Guang-Ji Yin, Xiao-Dong Wen, Ling Miao, Sai-Sai Wang, Xiao-Bao Zuo
-
Quantitative assessment of cement bridges and voids in cement-stabilized permeable base materials using a mask R-CNN-based CT image segmentation strategy Mater. Des. (IF 8.4) Pub Date : 2024-04-01 Xiaoming Wang, Yuanjie Xiao, Tao Yang, Meng Wang, Yuliang Chen, Zhiyong Li
-
3D printed Nanohydroxyapatite/Polyamide 66 scaffolds with balanced mechanical property and osteogenic ability for bone repair Mater. Des. (IF 8.4) Pub Date : 2024-04-01 Zhimou Zeng, Ping Song, Xingyu Gui, Boqing Zhang, Li Zhao, Pin Feng, Zhipeng Deng, Linnan Wang, Wei Wei, Chen Fan, Yunhong Wu, Qingquan Kong, Yujiang Fan, Changchun Zhou, Yueming Song
-
pH-responsive self-assembling peptides potentiate therapeutic efficacy via prolonged drug retention and immunomodulation Mater. Des. (IF 8.4) Pub Date : 2024-04-01 Shan Peng, Xiaomeng Yuan, Hongjie Li, Haiqin Huang, Chuntao Li, Chen Wei, Jiao Ren, Qingdong Zhang, Gang Ding, Jingkun Bai
-
Dy3+,Mn4+ co-doped phosphors for synergistic luminescent dual-mode thermometer and high-resolution imaging Mater. Des. (IF 8.4) Pub Date : 2024-04-01 Kangrui Qiang, Yulong Ye, Qinan Mao, Fang Chen, Liang Chu, Meijiao Liu, Jiasong Zhong
-
Functionalized microporous sulfonated polyetheretherketone: Osteogenesis and anti-osteoclastogenesis effects via ROS and NLRP3-mediated pyroptosis in macrophages Mater. Des. (IF 8.4) Pub Date : 2024-04-01 Chao Yang, Kechao Zhu, Guohui Liu, Xiangwei Yuan, Qi Wang, Xianlong Zhang
-
Biomimetic, folic acid-modified mesoporous silica nanoparticles with “stealth” and “homing” capabilities for tumor therapy Mater. Des. (IF 8.4) Pub Date : 2024-03-31 Xianlong Hu, Wei Xiong, Xingkang Liu, Jianwei Wang, Shuai Wang, Qiling Chen, Keqin Gao, Chenyang Li, Ying Li
-
Injectable osteogenic hydrogel based on antibiotic recognition for infected radial bone defect regeneration Mater. Des. (IF 8.4) Pub Date : 2024-03-31 Wenbo He, Shenghao Wang, Zhiwei He, Jia Gao, Miao Wang, Hongbo Qian, Guoqing Pan
-
Calcium phosphate ceramic-induced osteoimmunomodulation: Submicron-surface-treated macrophage-derived exosomes driving osteogenesis Mater. Des. (IF 8.4) Pub Date : 2024-03-31 Fuying Chen, Xiangfeng Li, Yumei Xiao, Xiangdong Zhu, Xuening Chen, Xingdong Zhang
-
Biodegradable all-natural hydrogel–mesh composite for wet tissues adhesion and infected wound healing Mater. Des. (IF 8.4) Pub Date : 2024-03-31 Yi Wang, Wei Jing, Yiqian Huang, Pengfei Wei, Shiqing Ma, Zuoying Yuan, Bo Zhao
-
The collaborated assembly of hydrophobic curcumin and hydrophilic cyanine dye into nanocolloid for synergistic chemo-photothermal cancer therapy Mater. Des. (IF 8.4) Pub Date : 2024-03-31 Meichen Zheng, Jingjing Zhang, Caiting Deng, Lei Chen, Heng Zhang, Jingqi Xin, Omer Aras, Mengjiao Zhou, Feifei An, Yu Ren
-
A chronological regulated implant coating with antibacterial and osteogenesis constructed by TA-mediated LbL self-assembly Mater. Des. (IF 8.4) Pub Date : 2024-03-31 Qinyue Dai, Yuan Zong, Jieyu Zhu, Shunhua Wang, Zilin Zhou, Yuanyuan Tu, Feifei Wu, Jiaojiao Yang, Jiyao Li, Kunneng Liang
-
An injectable CS-hydrogel incorporating TPGS for cartilage repair Mater. Des. (IF 8.4) Pub Date : 2024-03-31 Qingqiang Tu, Dong Jiang, Rongcheng Hu, Yong Liu, Xihong Fu, Weishen Chen, Ziji Zhang, Chun Liu
-
Decomposition and dewetting of super-saturated Cu-15 at. % Co solid solution film Mater. Des. (IF 8.4) Pub Date : 2024-03-30 Farnaz Farzam, Bárbara Bellón, Dominique Chatain, José A. Jiménez, Benjamin Breitbach, Matteo Ghidelli, María Jazmin Duarte, Gerhard Dehm
-
Stress equalizing in optimal design of High-Toughness lattice structures Mater. Des. (IF 8.4) Pub Date : 2024-03-30 L. Esposito, A. Cutolo, V. Minutolo, E. Sacco, M Fraldi
-
Dynamic recrystallization behaviors and cracking mechanism for the hot deformation of new-generation high nitrogen bearing steel Mater. Des. (IF 8.4) Pub Date : 2024-03-30 Dongsheng Qian, Mengli Sun, Feng Wang, Lechun Xie, Lin Hua
-
Dynamic deformation mechanism for distinct flow behaviors in FGH4113A superalloy with high γ′ content during isothermal compression at sub-/near-/super-solvus temperatures Mater. Des. (IF 8.4) Pub Date : 2024-03-30 Lihua Zhu, Bing Wei, Hao Pan, Lei Xiao, Jianzheng Guo, Hongjun Ji
-
Additive manufacturing of Fe-6.5 wt.%Si transformer steel toroidal cores: Process optimization, design aspects, and performance Mater. Des. (IF 8.4) Pub Date : 2024-03-29 Ali Zayaan Macknojia, John V. Tran, Michael P. McKinstry, Juan Galindo, Yuqi Jin, Shelden Dowden, Shreyash M. Patil, Mangesh V. Pantawane, K.V. Mani Krishna, Rajarshi Banerjee, Sameehan S. Joshi, Narendra B. Dahotre
Fe-Si electrical steels are conventionally popular materials for transformer application. Although higher Si (4wt.%<) content is favorable for increasing the resistivity and improving the soft magnetic properties, fabrication of transformer core with higher Si containing electrical steels is difficult by conventional wrought processes due to an increase in its brittleness. Additive manufacturing provides
-
On the influence of low-velocity impact damage on constrained-layer damping in hybrid CFRP-elastomer-metal laminates Mater. Des. (IF 8.4) Pub Date : 2024-03-29 Alexander Jackstadt, Wilfried V. Liebig, Kay A. Weidenmann, Luise Kärger
Following the principle of constrained-layer damping (CLD), fiber-metal-elastomer laminates (FMELs) offer a high potential for damped lightweight structures, overcoming the undesirable vibration characteristics of conventional lightweight materials. While proven to be versatile and efficient, the damage-tolerance of such laminates is unexplored. This study for the first time in literature addresses
-
Size effects in fatigue crack growth in confined volumes: A microbending case study on nanocrystalline nickel Mater. Des. (IF 8.4) Pub Date : 2024-03-28 Jutta Luksch, Aloshious Lambai, Gaurav Mohanty, Christoph Pauly, Florian Schaefer, Christian Motz
Mechanical size effects are a well known phenomenon when the sample volume is reduced or the characteristic length of the microstructure is changed. While size effects in micropillar compression (smaller is stronger) or due to grain refinement (Hall-Petch) are well understood, this is less so in fracture mechanics. Given this lack of knowledge, the main question addressed in this work is: What happens
-
Fabrication and mechanical properties of micro/nano-crystalline layers in M50NiL carburized steel Mater. Des. (IF 8.4) Pub Date : 2024-03-28 Zifeng Ding, Jiaxu Guo, Junbo Niu, Lina Zhou, Xinghong Zhang, Xinxin Ma
-
3D bioprinting advanced biomaterials for craniofacial and dental tissue engineering – A review Mater. Des. (IF 8.4) Pub Date : 2024-03-28 Hailong Xu, Yue Zhang, Yidan Zhang, Zhiyang Zhao, Tianyuan Xue, Jianing Wang, Mengmeng Li, Shanyu Zhao, Hui Zhang, Yue Ding
-
Investigation on multi-pulse femtosecond laser scribing of copper: Analysis of ablation grooves development and modeling modification Mater. Des. (IF 8.4) Pub Date : 2024-03-28 Chao Wang, Yukui Cai, Kuanxin Tang, Qinghua Song, Zhanqiang Liu
-
Comparison of in-plane compression of additively manufactured Ti6Al4V 2D auxetic structures: Lattice design, manufacturing speed, and failure mode Mater. Des. (IF 8.4) Pub Date : 2024-03-27 Zana Eren, Ozkan Gokcekaya, Demet Balkan, Takayoshi Nakano, Zahit Mecitoğlu
-
Flame-retardant mechanism of TiAl alloy by frictional ignition method Mater. Des. (IF 8.4) Pub Date : 2024-03-26 Shichao Zhu, Jinhu Liu, Tielong Sun, Leiting Jia, Yongfeng Liang, Hui Peng, Junpin Lin
-
Modulated electrical performance of cross-linked polyethylene by grafted charge-attracting molecules for high voltage direct current cable insulation Mater. Des. (IF 8.4) Pub Date : 2024-03-26 Xu Yang, Hong Zhao, Xuan Wang, Jiaming Yang, Chengcheng Zhang, Junqi Chen, Chunyang Li, Xindong Zhao, Manzhi Shao
-
A mechanically robust superhydrophobic corrosion resistant coating with self-healing capability Mater. Des. (IF 8.4) Pub Date : 2024-03-26 Jizhou Sun, Jian Wang, Weichen Xu, Binbin Zhang
-
Shear and shear-induced normal responses of origami cylinders relate to their structural asymmetries Mater. Des. (IF 8.4) Pub Date : 2024-03-26 Gerard Giménez-Ribes, Aref Ghorbani, Soon Yuan Teng, Erik van der Linden, Mehdi Habibi
Origami cylinders have been studied extensively under compression, however, their normal force response under shear deformation is still ill-understood. We experimentally studied the shear-induced normal force of these systems and provided a simple model to predict this response in Yoshimura and Kresling origami cylinders in the range of small deformations. Besides that, the effect of disorder is little
-
Accelerated estimation of the very high cycle fatigue strength and life of polymer composites under ultrasonic cyclic three-point bending Mater. Des. (IF 8.4) Pub Date : 2024-03-26 Aravind Premanand, Michael Rienks, Frank Balle
Ultrasonic fatigue testing (UFT) offers a strong potential to accelerate the testing time of fatigue experiments of materials up to very high cycle (VHCF) and giga-cycle (GC) fatigue regimes. This can especially be useful during the materials selection processes when designing load-bearing structures. In this study, one increasing- and three constant-amplitude fatigue experiments were conducted using