样式: 排序: IF: - GO 导出 标记为已读
-
Adhesive contact between a rigid toroidal indenter and an elastic half-space J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-28 Jiunn-Jong Wu
The adhesive contact between a rigid toroidal indenter and an elastic half space is investigated numerically. The traction is modeled using the Lennard-Jones potential with Derjaguin’s approximatio...
-
Impact of friction stir welding parameters and Al2TiO5 reinforcement on the mechanical, wear, and corrosion performance of dissimilar welded aluminium composite joints J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-27 K. Senthilraj, G. Rajamurugan
This study investigates the impact of friction stir welding (FSW) parameters on dissimilar AA5052-Al2TiO5/AA6061-Al2TiO5 composite joints. Tool rotational speed (TRS), feed rate, and aluminum titan...
-
Mechanical, metallurgical, and corrosion investigations on wire arc additively manufactured low carbon steel J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-21 Adarsh Prakash, Sachin Dnyandeo Kore
Current global 3D metal printing research is focused on powder bed fusion and direct energy deposition. Several materials are presently under research to assess their post-additive manufacturing pr...
-
Comprehensive behavior of reduced graphene oxide (rGO) reinforced plasma sprayed nanostructured WC–Co coatings J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-21 Akella Srikanth, Bolleddu Venkateshwarlu
The effects of reduced graphene oxide (rGO) as an additive on the microstructure, mechanical properties, and tribological behavior of air plasma sprayed (APS) nanostructured tungsten carbide–cobalt...
-
Preparation and properties of superhydrophobic fluorinated polyurethane with room temperature self-healing performance J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-21 Luyao Wang, Li Ye, Xiaoyu Zhang, Ning Li, Jiwei Li
This study synthesized a series of linear polyurethane elastomers (FTPU) with hydrophobicity and self-healing properties by adjusting the content of Polytetrahydrofuran (PTMEG) and fluorinated poly...
-
Synergic enhancement of ductility and toughness in friction stir additively fabricated AA6061-T6 build J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-21 Smrity Choudhury, Uttam Acharya, Durjyodhan Sethi, Joydeep Roy, Barnik Saha Roy
This study comprehensively investigates the ductility and impact toughness aspects of friction stir additively fabricated (FSAF) components, particularly crucial for applications in aerospace compo...
-
Expanded bentonite clay by bio-adhesive resins and its impact on the mechanical, adhesion, and ultrasonic properties of NR/SBR/polyester cords systems J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-19 Hesham Moustafa, Mirham A. Y. Barakat, Abd El-Aziz A. El-Wakil, Nabila A. Darwish
The improvement of the compatibility between two nonpolar rubber blends has a pivotal role to obtain superior blend properties. In this work, we utilized a facile and biofriendly modification appro...
-
Multi-field coupling numerical simulation and experimental research of submerged arc surfacing process on the descaling rolls with different wall thickness J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-17 Chang Li, Yunpeng Liu, Fenghua Luo, Xing Han, Lei Feng
Iron and steel industry descale rolls long-term high-pressure water erosion, high temperature, easy to wear, corrosion failure and other problems, the continuous production of steel rolling impact,...
-
Pull-off of viscoelastic spherical contact J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-14 Zhiqian Wang, Xingna Liu
This paper studied the adhesive contact between a viscoelastic sphere and a rigid plane, and presented a dimensionless first-order differential equation to directly describe the relationship betwee...
-
Is the repair bond strength affected when substrate and repair composite are not of the same kind? A systematic review and meta-analysis J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-14 Leyla Kerimova Köse, Hatice Işık, Tan Fırat Eyüboğlu, Mutlu Özcan, Sevi Burçak Çehreli, Neslihan Arhun
The aim was to evaluate the influence of repair resin type on repair bond strength in the direct resin restorations through a systematic review. Electronic databases MEDLINE via PubMed, Web of Scie...
-
Exploration of aspartame as a green and sustainable corrosion inhibitor for T95 steel in 28 wt.% HCl at elevated temperatures: effect of sodium dodecylsufate and KI addition on performance J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-14 Moses M. Solomon, Ifeanyi E. Uzoma, Godwin A. Udourioh, V. I. Chukwuike, Saviour A. Umoren
Acidizing is a vital oil well stimulation exercise but must be done with an effective corrosion inhibitor to reduce corrosion risk. It is, however becoming increasingly difficult to find a corrosio...
-
Correlation analysis between fracture toughness and tensile strength of cement soil based on notched semi-circle bend specimen J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-14 Shaoxian Song, Chuan Lv, Jiang Du, Junjie Wang
To reveal the influence of cement proportion (P) and curing age (T) on the anti-cracking ability of cement soil, notched semi-circular bending specimens were used in this study. Tensile strength te...
-
Comparative analysis of reinforcement addition techniques on fabricated hybrid surface composite of AA7075-T651/WC/BN through friction stir processing J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-11 Ankur Vasava, Dinesh Singh
In the present work, three reinforcement addition techniques such as the slot method (SM), hole method (HM), and zig-zag hole method (ZZHM), are selected to make the hybrid surface composite of AA7...
-
Plastic behavior of a film type of epoxy adhesive under a wide range of stress multiaxiality conditions J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-11 Yousuke Kouno, Makoto Imanaka, Ryutaro Hino, Masaki Omiya, Fusahito Yoshida
The yield stress of rubber-modified epoxy adhesives is affected by hydrostatic stress in the adhesive layer. It is necessary to clarify whether hydrostatic stress modeling is essential for highly t...
-
Effect of thiol compound on the dentin bond strength when using experimental one-bottle self-etch adhesive system J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-05 Masao Hanabusa, Kazuyoshi Okawa, Nana Sakaeda-Naito, Takatsugu Yamamoto
This study evaluated improvements in the micro-tensile bond strength of a one-bottle adhesive to dentin upon incorporating a thiol compound. Formulations containing 0, 0.1, 0.3 or 0.5% of the thiol...
-
Effect of heating temperature on the behavior of reinforced zinc-rich coating with nanoparticles J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-05 Mohammed Y. Yousif, Nuha Hadi Jasim Al Hasan, Haider M. Mohammad, Murtadha Abbas Jabbar
An experimental study has been conducted to develop unique zinc-rich coatings for the protection of low carbon steel reinforcements. These coatings are applied to low carbon steel substrates and su...
-
Penetration depth, phase balance and corrosion behaviour in activated TIG welding of UNS S32205 J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-04 Kamal Rouhbakhsh, Ali Reza Ebrahimi
The aim of this research is to investigate the impact of a flux containing 80% TiO2 and 20% CeO2, under protective atmosphere (100% Ar, 98% Ar-2% N2, and 95% Ar + 5% N2) on penetration depth, phase...
-
Evaluating structural strength and vibrational characteristics of silicon carbide incorporated adhesively bonded single lap joints J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-03-03 Thulasidhas Dhilipkumar, Murugan Rajesh, P. Sathyaseelan, R. Sasikumar, Arun Prasad Murali
The adhesive bonding approach is widely used in assembling of spars, stringers, ailerons, flaps, and rudders in aircraft. The present research investigated the impact of silicon carbide (SiC) nanop...
-
Microstructures and mechanical properties of TA1 sintered samples prepared by injection molding using water-soluble binder J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-27 Weichen Zhang, Lu Li, Peng Cao, Gang Chen, Muhammad Dilawer Hayat
A water-soluble binder was used to obtain TA1 sintered samples prepared by injection molding. The effects of the sintering temperature on the microstructures and mechanical properties of the sinter...
-
Tailoring friction stir welding and postheat treatment of high-carbon steels to obtain nanostructured bainite J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-27 Behzad Avishan, Mehdi Hosseinzadeh Khanmiri, Majid Charchi Aghdam, Akbar Heidarzadeh
Conventional welding processes destroy the unique microstructural characteristics in nanobainitic steels. A novel method, i.e. tailored friction stir welding (FSW) and postheat treatment, was emplo...
-
Preparation and properties of spirulina protein graft modified adhesive, used in plywood wood bonding J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-25 Yankang Hou, Zhenzhong Gao, Xianfeng Hou, Qi Fan, Jin Sun, Haiyang Zhou, Ritian Liu, Shijing Yan
In this study, glycidyl methacrylate (GMA) was grafted onto spirulina protein isolate (SPPI), a novel raw material, to increase its water resistance and create an eco-friendly wood adhesive. Papain...
-
Effect of extended outdoor exposure on surface quality and mechanical properties of Malaysian hardwood species J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-20 Mohd Khairun Anwar Uyup, Alia Syahirah Yusoh, Asniza Mustapha, Ong Chee Beng, Nordahlia Abdullah Siam, Zhang Jinfeng, Salim Hiziroglu
Tropical hardwoods, often used as outdoor wood products, are frequently exposed to the hot and humid conditions in Malaysia. This has led to many studies attempting to develop suitable coatings and...
-
A morphology study on Soy-based adhesive modified by Mg (NO3)2 J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-18 Sara Shojaei Rad, Ali Abbasian, Adeleh Divasalar
Soy-based adhesive is being explored as a viable alternative to formaldehyde-based resins in the wood product industry due to growing environmental concerns. However, soy-based adhesive faces limit...
-
Contact angle measurement for polymeric membranes: software selection for ease of use and precision J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-20 Mehwish Abbas, M. Javed Iqbal, M. Hammad Khan
Contact angle measurement by sessile drop (SD) and captive bubble (CB) method is calculated by the four software, i.e. ‘Angle Tool’ plugin, Drop Snake (DS) plugin, and LB-ADSA plugin of the ImageJ®...
-
Effect of SBS/SBR/component molecular compatibility on anti-aging properties for asphalt binder J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-16 Tengjiang Yu, Wenzheng He, Hu Shao, Jiting Li
To explain the effect of SBS/SBR/component molecular compatibility on anti-aging properties for asphalt binder, the micro-aging behavior of SBS/SBR composite modified asphalt binder was studied by ...
-
Pull-off of a rigid cone from a viscoelastic substrate J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-14 M. Ciavarella
The pull-off of a sphere from an elastic substrate follows the well-known JKR solution, and a similar but less known solution is valid for a cone. The two differ qualitatively in the parametric dep...
-
Self-etching primer versus hydrofluoric acid and air-abrasion: effects on flexural and resin bond strengths of resin-based CAD/CAM material J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-13 Hüseyin Şeker, Yener Okutan
This study aimed to evaluate the effect of self-etching primer (Monobond Etch & Prime; MEP), hydrofluoric acid (HF), and air-abrasion (A) protocols on shear bond strength (SBS) of resin cement and ...
-
Surface modification strategies of 304 austenitic stainless steel plate with different micromorphology and composition for improved mechanical interlocking and chemical bonding in metal–epoxy joints J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-09 Yake Wang, Cuirong Liu, Yan Li
304 austenitic stainless-steel (SS) strip-based carbon fiber metal laminates (CFMLs) have raised significant concerns, in terms of their mechanical performance. On top of that, the hybrid laminates...
-
Development and thermo-mechanical characterization of cyanoacrylate-based tissue adhesives J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-11 Miguel Grissai Santos, Marjorie Benegra, Giuseppe Pintaude
Tissue adhesives are crucial in current medical practice, facilitating the healing process in traumatic lacerations and surgical incisions. This work aims to develop and characterize tissue adhesiv...
-
High performance polyurethane nanocomposite coatings based on 2D materials for improved anticorrosion and flame-retardant applications J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-11 Joseph Raj Xavier, Vinodhini S.P
Cobalt disulphide (CoS2), 3-amino-5-ethoxy-1,2,4-triazole (AET), and graphene oxide, also known as GO, were added to polyurethane (PU) coatings to improve their anticorrosion and fire-retardant pro...
-
Study on process, microstructure and mechanical properties of 6061/AZ31 dissimilar metal joining with direct contact reaction brazing J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-11 Liang Chang, Da Yu, Zhentai Zheng, Yang Zhang, Mengfei Cui, Peng Du
In this study, 6061-Al and AZ31-Mg were successfully joined using the contact reaction brazing process without an interlayer under a pressure of 2 MPa and a vacuum of 1 Pa. The study examined the m...
-
Study on the mechanism and correlation of double-pit pitting in ductile iron IN625 laser cladding layer J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-07 Shuangjiu Deng, Chang Li, Menghui Yu, Jiangtao Zhao, Xing Han
With its excellent strength and toughness, ductile iron is widely utilized in marine applications, including ship propellers, rudders, ship cabin pumps, valves, and pipes. Laser cladding is an emer...
-
Relationship between thermal curing behavior and bond strength development in formaldehyde-based resins with different molecular weights J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-07 Eko Setio Wibowo, Byung-Dae Park, Jure Žigon, Milan Šernek
Urea–formaldehyde (UF) and phenol–formaldehyde (PF) resins are the most widely used adhesives in the production of wood composites, and are cured through hot-pressing to provide adhesion strength w...
-
A rapid two-step process to prepare a high-throughput, efficient, reusable superhydrophobic–superoleophilic stainless steel mesh for oil/water separation J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-02-01 Wenxin Zhang, Chuanbo Hu, Chaoyun Bai, Xin Zhang, Si Zhang, Jianting Tang, Yazhou Kong, Tingzhen Li
Currently, due to the industrial development, the direct discharge of large amounts of oil-containing wastewater has led to serious water pollution. It is necessary to develop an efficient, durable...
-
Tribological behavior of styrene butadiene rubber conveyor belts: effects of applied load and rotational speed J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-31 Liangpeng Jiang, Qianhui Yin, Hengzheng Li
Conveyor belts are used for material transportation in the mining and construction industries. The friction and wear properties of the styrene butadiene rubber (SBR) used in conveyor belts are inve...
-
Optimizing microstructures and properties of PEO coatings on sandblasted pure titanium: the influence of jet angle J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-30 Hongyuan Wang, Long Qi, Han Gao, Haibo Zhang, Yingxue Lan
Commercial pure titanium discs were subjected to sandblasting using varied treatment jet angles, and the samples were subsequently modified by plasma electrolytic oxidation to optimize both mechani...
-
Enhancing adhesion of fluorinated ethylene propylene through atmospheric pressure nitrogen plasma treatment: a comprehensive adhesive selection approach for optimal peel strength characterization J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-22 Williams Caceres, Alex Destrieux, Jacopo Profili, Morgane Laurent, Sethumadhavan Ravichandran, Andrew Smith, Gaétan Laroche
Fluoropolymer films were treated by atmospheric pressure nitrogen plasma in a roll-to-roll configuration. This treatment aimed to modify the surface properties of the fluoropolymer and assess its a...
-
Effect of zinc nanoparticles on the mechanical properties and stability of the resin-dentin bonded interface J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-21 Marina Rodrigues Santi, Beatriz Ometto Sahadi, Jorge Rodrigo Soto-Montero, Rodrigo Barros Esteves Lins, Marina Ciccone Giacomini, Linda Wang, Grace Mendonça De Souza, Luís Roberto Marcondes Martins
To evaluate the effect of zinc oxide and zinc fluoride nanoparticle solution (ZNS) as pretreatment on the mechanical properties and stability of resin-dentin bonded interface. Pretreatment solution...
-
Parametric effect on microstructure evolution, grain size and mechanical behaviour of friction stir butt welding of AA6061-T6 alloy J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-18 Virendra Pratap Singh, Deepak Kumar, Basil Kuriachen
This study examines how friction stir welding (FSW) changes the microstructure and mechanical properties of an AA6061-T6 alloy joint. Results showed that welding speeds (WSs) affected microstructur...
-
Bonding characteristics of aluminium laminates and aluminium–graphite composites processed by roll bonding J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-17 Akash Biradar, M. Rijesh
Roll bonding is a solid-state welding process, employed to join similar and dissimilar metals. Roll bonding with secondary particles in-between and accumulating the roll bonded material multiple ti...
-
A novel approach to suppression of reverted austenite in aerospace grade thick maraging steel weldments using the turbo-TIG welding process J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-16 Arunprakash R, Manikandan M
This research examines aerospace grade-maraging steel weldments produced by the novel Turbo-TIG welding technique. The vital challenge in welding maraging steel is the development of reverted auste...
-
Effect of welding speed on microstructure, nano-mechanical and nano-tribological characteristics of dissimilar friction stir welded AA6061-T6 and AZ31 alloy J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-11 Virendra Pratap Singh, Ashish Kumar, Deepak Kumar, Basil Kuriachen
The microstructural, tribological, and mechanical performance of friction-stir welded AA6061-T6 and AZ31 alloys were investigated using electron back scattered diffraction, scanning electron micros...
-
Preparation and performance study of SiO2 aerogel thermal insulation coating with nanoporous structure for wind turbine blade surface J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-11 Jianjun He, Caiyuan Huang, Min Pu, Zhonghu Shu, Zihao Duan, Zijing Zeng, Jianwei Li
To prepare a base layer of thermal insulation for the surface of wind turbine blades, we utilized SiO2 aerogel material with a nanoporous structure as the thermal insulation layer of an inorganic c...
-
Research on joint strength and energy absorption of CFRP and Al sheets bonded-FDS hybrid joining J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-11 Shanling Han, Jie Yin, Xinjie Guang, Tao Wang, Yong Li
The application of a composite-metal alloy lightweight body structure is one of the ways to achieve lightweight in an automobile. Materials such as carbon fiber reinforced polymer (CFRP) and alumin...
-
Effect of ultrasonic bonding and lamination on electrical performance of copper indium gallium (de)Selenide CIGS thin film photovoltaic solar panel J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-11 Hassan Basher, Muhammad Nubli Zulkifli, Azman Jalar, Michael Daenen
This paper aims to study the effect of ultrasonic aluminum (Al) bonding and lamination processes on the electrical performance of copper indium gallium (di)selenide (CIGS) thin film photovoltaic (T...
-
The effect of abrading treatment method on the bonding surface characteristics and fracture behavior of glass fiber-epoxy composite adhesive joints J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-11 Roohollah Nazari, Hadi Khoramishad, Rashid Hakimi
The effect of the mechanical abrading method on the bonding surface characteristics and fracture response of glass fiber-reinforced polymer (GFRP) composite adhesively bonded joints was investigate...
-
Enhancing the bond strength of magnetron-sputtered copper layers on polyimide and polyether ether ketone surfaces through surface modification J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2024-01-11 Ruijun Wang, Puren Liu, Jingbo Liu, Tianshi Wang, Xiaolu Pang, Lining Xu, Lijie Qiao
This study explores the fabrication of composites involving polyimide (PI) and polyether ether ketone (PEEK) resins with Cu using chemical treatment and sandblasting, followed by plasma cleaning in...
-
Comparison of in situ and padding method to incorporate Green synthesized AgNPs by using Calendula arvensis into nonwoven fabrics J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-22 Toufique Ahmed, Sabiha Sezgin Bozok, R. Tugurl Ogulata
Nonwoven fabrics are the primary source of disposable medical clothing, which cause a huge medical waste. One possible way to reuse this disposable clothing is through antibacterial treatment. Amon...
-
Polymer-based biomaterials and their applications in tissue adhesives J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-15 Daman Yadav, Pijush Giri, Chiranjit Das
Tissue engineering has evolved from the field of Biomaterials development to the technological advancements in processing and fabrication techniques. The primary goal of this field is to assemble f...
-
Shear bond strength of MDP-containing light-cured veneer adhesive system to zirconia with different surface preparations J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-13 Nguyen Viet Anh, Tong Minh Son, Vo Truong Nhu Ngoc, Pham Thanh Ha, Dang Trieu Hung, Mai Hang Nga, Nguyen Thu Tra
This study aimed to evaluate the effects of different surface preparation techniques on the surface microstructure, the shear bond strength (SBS) between zirconia and an MDP-containing light-cured ...
-
Study on the bond properties between basalt fiber-reinforced spontaneous combustion coal gangue concrete and BFRP bars J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-11 Zhenrong Liu, Huaxin Liu, Weixing Xu, Beibei Liu, Yue Zhong, Jian Geng, Genjin Liu
Microstructural characterization of spontaneous combustion coal gangue (SCCG), the hydration products and mechanism of spontaneous combustion coal gangue concrete (SCCGC) were discerned through mic...
-
Study on the interfacial microstructure evolution of aluminum and CFRTP on FSLW joints: influence of pin length J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-08 Yibo Sun, Yuan Zhang, Haiwei Long, Jianning Zhu, Libin Fu, Xinhua Yang
Polymer/metal hybrid lightweight structures are increasingly employed in automotive, aerospace and electronics industries. Friction stir welding (FSW) is applied for the effective welding of metals...
-
Residual regression on laser welding of CFRP-metal hybrid structures J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-08 Zhenhong Zhou, Xiangdong Gao, Bo Ma, Yanxi Zhang
The laser welding between high strength steel and carbon fiber reinforced polymer (CFRP) was explored in order to improve the mechanical properties and capacity to reflect physical relationships. T...
-
Correction J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-06
Published in Journal of Adhesion Science and Technology (Ahead of Print, 2023)
-
Effects of arc current and travel speed on the processing of stainless steel via wire arc additive manufacturing (WAAM) process J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-08 Vishwanatha H. M., Rajath N. Rao, Manjunath Maiya, Pawan Kumar, Nakul Gupta, Kuldeep K. Saxena, Vijeesh Vijayan
Wire Arc Additive Manufacturing (WAAM) is an additive manufacturing process that uses an electric arc as the heat source to melt the feed metal wire and deposit it as per the desired 3D shapes. The...
-
Experimental investigation on the mechanical properties of resistance seam welding of thin sheet J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-07 Mithilesh K. Dikshit, R. Srinivas, Sanket Panchal, Manoj Agrawal, Arti Verma, Vimal K. Pathak
In the presents research an experimental investigation was conducted on the resistance seam welding of thin sheets of thickness 0.2 mm for packaging application. The most difficult issues in such s...
-
Strengthening the HAZ of an MIG welded joint of 6082-T6 aluminum alloy via mechanical-thermal hybrid aging treatment J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-06 Mingxiao Shi, Jingyong Li, Weidong Mao, Zhidong Yang, Xiang Ma
In this work, mechanical vibration was applied to the weldment during welding. This technique is called simultaneous mechanical aging and combined with post-weld thermal aging to form a mechanical-...
-
Preparation and properties of high molecular weight high temperature resistant carborane polyurethane adhesive J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-06 Luyao Wang, Xiaoyu Zhang, Yi Guo, Jiahao Gao, Binghao Ma, Fanglei Zeng, Hailong Liu, Ning Li, Gang Yi, Zhongwei Wang
The long-term use temperature of the traditional high-temperature adhesive can only reach about 280 °C, and it cannot be used in extreme environments such as acid and alkali for a long time, which ...
-
Interfacial microstructure evolution and mechanical properties of TIG welding joints of AISI 304/Q235B rolled composite plates J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-12-06 Dongcai An, Tingting Zhang, Tao Wang, Wenxian Wang
This study presents a comprehensive characterization of the microstructure evolution and distribution of interfacial bonding properties in the original rolled plates and a welded AISI 304/Q235B cla...
-
A study of parametric optimization, microstructure and wear behavior of an AA7075–SiC composite coating developed by friction surfacing J. Adhes. Sci. Technol. (IF 2.3) Pub Date : 2023-11-30 Rajat Gupta, Lalit Thakur
This research work was performed to successfully develop a wear-resistant AA7075–SiC composite coating over AA6082 substrate via friction surfacing. For the composite coating deposition, AA7075 con...