样式: 排序: IF: - GO 导出 标记为已读
-
Enhancing uniformity in large-area slot die coating of low-viscosity perovskite ink J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-16 Haiwen Peng, Hongwei Hu, Jiali Ding, Guanggui Cheng, Jianning Ding
-
Synthesis and characterization of Cerbera odollam (sea mango) oil-based alkyd resin as binder for surface coating paint and matrix material for reinforced polymer composites J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-12 Emeka Michael Madiebo, Chigozie Francolins Uzoh, Okechukwu Dominic Onukwuli, Paschal Enyinnaya Ohale, Chinenyenwa Nkeiruka Nweke, Chinenye Adaobi Igwegbe, Matthew Ndubuisi Abonyi, Monday Morgan Chukwu
-
Effect of carboxyl on wettability and anti-fingerprint capacity of transparent chitin nanofiber coatings modified using fluorosilane J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-10 Peizhuang Wang, Li Zhang, Zhiqing Hu, Jiaqi Shang, Jiang Zhou
-
Preparation and performance study of thermally conductive coatings with mixed fillers J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-09 Lulu Ban, Yaxing Zhao, Chen Chen, Binjie Yang, Chao Chen, Shuai Zhang, Ren Liu, Xinxin Sang
-
Solvent-free flexible epoxy intumescent fire-retardant coatings J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-09 Chen Ling, Rudong Zhou, Yanli Xiang, Jianbo Fang, Xu Meng, Qiang Ren, Chenyi Wang
-
Preparation and characterization of high barrier coating of citric acid crosslinked polyvinyl alcohol and nano-SiO2 J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-09 Kexin Liu, Shuting Huang, Fang Duan, Jun Wang
-
Antifouling efficiency of polymer coatings with SeNPs-loaded SiO2(rh)-PHMG composite as antimicrobial agent J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-08 U. Kharchenko, I. Beleneva, O. Arefieva, V. Egorkin, N. Izotov, I. Vyaliy, D. A. Nguyen, S. Sinebrukhov, S. Gnedenkov
-
Structure and properties of polyvinyl alcohol (PVA)/Al2O3 antifogging coating with self-healing performance J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-05 Mingxia Yang, Xiuzhen Wang, Jianfeng Sun, Mengyao Li, Qing Jia, Mouyong Teng
Condensation of fog droplets on polyethylene (PE) films significantly impairs light transmission of the film. This study introduces a PVA/Al2O3 antifogging coating, applied to PE films using polyvinyl alcohol (PVA) and nanoaluminum sol. The resultant coatings exhibit superior wettability and an extended antifogging lifespan. Specifically, the coating maintains a low contact angle of 21.1° and demonstrates
-
Synthesis of nonionic polyacrylate emulsions: coatings for digital inkjet printing J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-04 Shuai Wang, Baoling Tang, Jiehong Lu
-
One-dimensional structured fillers as novel carriers for self-healing coatings: a comprehensive review J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-02 Hanhai Dong, Shanda Wang, Ke Yang, Yanru Chen
One-dimensional structured fillers play a crucial role in promoting the rapid and spontaneous healing of defects induced by damage in self-healing coatings. This innovative type of self-healing coating prevents the substrate material from corroding, thereby significantly extending its service life. The modification of self-healing coatings with one-dimensional structured fillers relies on functional
-
Enhancing the functionality of biodegradable Mg–Zn–Mn alloys using poly(lactic) acid (PLA) coating for temporary implants J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-04-01 Prakash Kumar, Gajanan Anne, M. R. Ramesh, Mrityunjay Doddamani, Ashwini Prabhu
Polylactic acid (PLA) was coated on biodegradable Mg–Zn–Mn alloys using a sol–gel coating technique for temporary implant applications. The presence of smooth, dense, crack-free PLA coating was evidenced using Fourier transform infrared spectroscopy (FTIR) and a scanning electronic microscope (SEM) equipped with an energy-dispersive X-ray spectroscopy (EDX) module. The strength of the bond between
-
Emulsion polymerization process: effects of particle nucleation mechanism on properties of acrylic-styrene latex J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-27 A. Sardari, V. Mannari
-
Titanium dioxide and silver nanoparticles applied in mineral paints for outdoor and indoor environments J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-27 Isabel C. R. Gomes, Katia J. Ciuffi, Liziane Marçal, Lucas A. Rocha, Eduardo J. Nassar
-
Preparation and performance study of hydrophobic fumed silica loaded with BTA/epoxy composite coating J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-22 Xin Sun, Yan Zhang, Xinyu Wang, Xiaomei Wang, Minsheng Bu, Qiyuan Li, Xiao Wang, Wei Lu, Weili Li, Zheng-Bai Zhao
-
Insights into the corrosion mitigation efficacy of modified SiO2/GO-based epoxy composite coatings for aluminum alloy AA6061 in marine applications J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-22
Abstract The corrosion protection of aluminum alloys is severely compromised by marine environments, demanding the formulation of efficient protective coatings. Epoxy resin, diglycidyl ether of bisphenol A (DGEBA), and curing agent diethylenetriamine (DETA) were used with the mixing ratio of 100:12 to synthesize functionalized SiO2/GO-based composite coatings and investigate the corrosion protection
-
Bacterial decontamination of process liquids and paints in E-coating lines by pulsed electric field treatment J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-19 Christian Gusbeth, Peter Krolla, Julia Bruchmann, Thomas Schwartz, Georg Müller, Wolfgang Frey
-
Zein–natamycin functional films with ethylene adsorption and fungi stasis for active food packaging applications J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-13 Xin Fan, Ting Yang, Yuxin Li, Miaomiao Liu, Huan Wang, Lu Chang
-
Study of SiO2 aerogel/CNTs photothermal de-icing coating for wind turbine blades J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-12
Abstract Ice on the surface of wind turbine blades may result in power production losses and unsafe operations. An effective technological solution to the ice issue is coating de-icing. This study first constructed SiO2 aerogel/CNTs (carbon nanotube) coating with photothermal de-icing by incorporating photothermal nanoparticles into the created nanoporous structure. The coating structure examined by
-
Study on synthesis and properties of Na+–La3+ co-doped γ-Ce2S3 pigment by low-temperature self-propagating combustion method J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-12 Boyuan Wu, Yueming Li, Fusheng Song, Kai Li, Yi Sun, Zhumei Wang
-
Biogenic silver nanoparticle-coated low density polyethylene film with antibacterial and antioxidant properties J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-11 Sumi Maria Babu, Leon Ittiachen
-
Wear, thermal, corrosion, and physical properties of novel UV-cured nanocomposite hybrid coatings with fluorine-containing silica networks J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-11 Mustafa Çakir, Emre Akin, Kerim Günsay, Recep Artir
-
Epoxidized technical Kraft lignin as a particulate resin component for high-performance anticorrosive coatings J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-08 Alessio Truncali, Tejasvi Laxminarayan, Narayanan Rajagopalan, Claus Erik Weinell, Søren Kiil, Mats Johansson
-
Infrared-responsive shape memory self-healing and fluorescent damage-indication anti-corrosion coatings for aluminum alloys J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-05
Abstract Widely applied aluminum alloys in ship hulls, underwater vehicles, and marine machinery experience severe corrosion in harsh marine environments. For corrosion protection of aluminum alloys, the most convenient, effective, and low-cost approach was the application of anti-corrosion coatings. Coatings possessing self-healing properties to spontaneously repair damages have emerged as a research
-
Synthesis and characterization of porous TiO2 and its application in hydrophilic coatings J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-04 Zichen Wu, Rui Wang, Dongyun Li, Meilin Sungao, Yang Xu, Hong Liang Ge
-
Multifunctional polyurethane coatings with excellent antifouling and self-healing properties J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-04 Haoran Wei, Henghui Liu, Min Li, Zhinan Fu, Liqun Liu, Hanjie Zhang, Chuanjie Fan, Jun Xu, Jie Wang
-
Inclusion complex-based multifunctional polyurethane antibacterial coatings with excellent mechanical and thermal properties J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-04 Anjali Sharma, Indu Pal Kaur, Fengge Gao, Gaurav Verma
-
Fabrication of superhydrophobic TA2 titanium alloy and preliminary assessment of its antifouling, self-cleaning, anti-icing, friction resistance, and corrosion resistance performance J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-03-01 Sian Chen, Benfeng Zhu, Xuesheng Wang, Na Chen, Guowei Ji, Mengyan Liu, Yumeng Yang, Li Ren, Shuxin Shuai, Jiajun Cao, Li Jiang, Guoying Wei
-
Advances in emerging hydrogel fouling-release coatings for marine applications J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-23 Michael Kio, Jeffery Klauda
-
Preparation of active–passive anticorrosion antistatic epoxy nanocomposite coatings loaded with CeO2, CeO2@C, and CHS particles J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-22 Sara Sabzavar, Mehdi Ghahari, Mehran Rostami, Morteza Ganjaee Sari
-
Dual-responsive wettability of poly o-toluidine nanofiber coating fabricated by interfacial polymerization J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-21 Xianghui Xu, Hansong Zuo, Xiaoyan Zhou, Weiwei Wei, Yongqing Cao
-
Simulation analysis of the start-up process of Carreau-type fluid slot die coating J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-15 Shaofei Pan, Yikun Wei, Jianneng Chen, Chuanyu Wu, Jiangming Jia
-
Biodegradable surfactants do not improve antifouling or fouling-release performance of polydimethylsiloxane J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-13 Emmerson R. Wilson, Katerina Basque, Meaghan MacDonald, Amelia F. MacKenzie, Michelle Hodgson, Robin Stuart, Truis Smith-Palmer, Russell C. Wyeth
-
Antimicrobial surface coating as a pathway to curb resistance: preparation, mode of action and future perspective J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-12
Abstract Antimicrobial resistance has proven to be an existential threat that endangers the health of human beings. The ease of accessing conventional antibiotics, and their unlimited and unregulated use and often misuse is seen to be a contributing factor to the rise in the resistance of microbes toward medications. The overuse of these medications in the agricultural sector also adds to the rising
-
An A2 + CB2 approach to the synthesis of hyperbranched polyester polyol and application in PU coatings J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-08 Amardip M. Patil, Dhammanand J. Shirale, Harishchandra D. Jirimali, Ramanad N. Jagtap
-
Preparation and performances of cationic waterborne polyurethane coating co-modified with acrylic and amino acid J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-08 Guankun Kuang, Yan Liu, Ying Qin, Tianhao Lu, Binjie Xin
-
Unraveling the influencing mechanism of water ingress on the adhesion behavior of poly(dimethylsiloxane)-silica interface: a molecular dynamic study J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-07
Abstract Water ingress in nanofiller reinforced polymer nanocomposite is usually considered as one of the causes for the interfacial failure between nanofiller and nanocomposite. However, the molecular mechanism for the effects of water on the interfacial adhesion behavior has rarely been studied. In this work, atomic scale interfacial adhesion behavior of silica nanoparticles reinforced poly(dimethylsiloxane)
-
Fabrication of hydrophobic coatings on paper substrates using silicone oil impregnated silica: a promising sustainable packaging material J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-07 Angitha Francy, T. M. Ragi, A. Peer Mohamed, S. Ananthakumar
-
Cationic UV-cured epoxy coating with inhibitor-loaded nanoparticles: photoinitiated cationic polymerization, mechanical properties and corrosion protection of steel J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-07
Abstract This work aims to explore how the cationic UV-curing technology can be applied for corrosion protection of metals. For this purpose, the cationic UV-curing epoxy coating is prepared on the steel surface, with addition of the inhibitor-loaded nanoparticles. To reveal the effect of Ce-loaded SiO2 nanoparticles on the photoinitiated cationic polymerization of epoxy coating, various measurements
-
Advances in anti-corrosion coatings on magnesium alloys and their preparation methods J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-06 Jing Tan, Lizi Liu, Hui Wang, Jinjie Luo
-
Investigation of the effect of fluorine and silane-containing monomers on waterborne hybrid (alkyd/styrene acrylic) latexes J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-05 Nurullah Kartaloğlu, Ali Delibaş
-
Engineering of new anti-biofilm phosphonium thin coatings onto polymeric films J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-05 Matan Nissim, Sivan Shoshani, Taly lline-Vul, Gila Jacobi, Eyal Malka, Ehud Banin, Shlomo Margel
-
Hydrophilicity–hydrophobicity adjustable polymer-modified surfaces from one-step dip-coating method J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-05 Xing Liu, Jiliang Zhang, Mochou Liu, Xia Han, Honglai Liu
-
Anticorrosive barrier coatings modified by core-shell rubber particles: effects on the property transients and premature crack initiation susceptibility of particle type and concentration J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-02 Qiong Li, Søren Kiil
-
Chloride transmission in silane composite emulsion-protected concrete under the coupling effect of flexural loading and wetting–drying cycles J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-02-02 Mengjun Hu, Shaochun Li, Xu Chen, Shiyu Sui, Yongjuan Geng, Jialin Jiang, Zhijun Liu
-
Use of N-substituted-2-pyrrolidone-4-carboxylic acids as bio-based monomers for alkyd syntheses: route to 100% bio-based alkyd emulsions J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-30 Keimpe J. van den Berg, Leon J. P. van der Boon, Aranka G. M. L. van Klink, Marie A. F. Delgove, Iris T. M. Klein Schiphorst
-
Open-air plasma-assisted deposition of organosilicon coating for corrosion protection of AZ91D Mg alloy J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-30 Jiheon Jun, Yi-Feng Su, John E. Wade, Daphne Pappas, Andrew Sy, Ryan Robinson, Yong Chae Lim
-
Regulate solar irradiation with smart microshutters J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-29
Abstract Thermochromic windows have emerged as promising candidates for energy-efficient buildings owing to their passive and self-regulating characteristics. Herein, we propose thermal-deformable microshutters as smart coatings for thermochromic window applications. These microshutters employ multilayer nanomembranes, specifically utilizing a thermodeformable hydrogel layer, to synergistically combine
-
High-speed slot-die coating of primer layers for Li-ion battery electrodes: model calculations and experimental validation of the extended coating window depending on coating speed, coating gap and viscosity J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-29 Sandro Spiegel, Alexander Hoffmann, Julian Klemens, Philip Scharfer, Wilhelm Schabel
-
Numerical and experimental investigation on formation of the film for different die lip configurations in lithium-ion battery electrode slot-die coating J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-23 Xiaosong Gong, Jie Han, Fei Yan, Xiaozhong Du
-
Sucrose-derived carbon membranes for sustainable water desalination J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-23 Adi Darmawan, Hasna Ulfa Nurfadila, Ayu Sri Wahyuni, Hasan Muhtar, Yayuk Astuti
-
Durability of photocatalytic ZnO-based surface coatings and preservation of their antibacterial effect after simulated wear J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-19
Abstract This study focused on antibacterial durability testing of surface coatings based on acrylic matrix-embedded UVA-activated ZnO. Such coatings on stainless steel were treated by dry rubbing, wet rubbing, and abrasive treatment to simulate wearing during everyday touching, cleaning, and aggressive scrubbing. Abrasive treatment caused clear topological changes to the surfaces, flattened the surface
-
Integration of unmodified kraft lignin powder in waterborne coatings and investigation of antifouling properties J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-18
Abstract Antifouling properties of unmodified kraft lignin for potential use in marine coatings were investigated. The study was based on preliminary findings that pointed toward lignin’s efficacy against seawater organisms during laboratory tests. Coatings were formulated that contained lignin as a filler and had a pigment volume concentration above the critical pigment volume concentration. This
-
A durable and multifunctional antifog, antifrost, and self-cleaning/oil repellant UV curable coating based on poly(sorbitol-co-isophorone-co-ethyleneglycol)acrylate J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-17 Dhiraj S. Kaikade, Anagha S. Sabnis
-
A review of high-quality epoxy resins for corrosion-resistant applications J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-09
Abstract Corrosion is a significant challenge in many practical applications, leading to the deterioration of metal infrastructure and equipment. A literature review indicates that various epoxy resins (ERs) and epoxy phenolic resins (EPRs) based coatings are available and are effectively applied on steel and aluminum surfaces for protection against a corrosive environment. The corrosion-resistant
-
Bismuth oxide nanoparticles/waterborne polyurethane-coated fabrics for ionizing radiation protection J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-08
Abstract Ionizing radiation is the energy in the form of waves or particles that has the power to eject electrons from atoms and its main sources are radiological and nuclear medical examinations, cancer treatments, X-rays and gamma rays used in industry, and nuclear accidents. Since ionizing radiation has negative effects on human health, it is important to be protected against it by using shielding
-
Biomass adenosine triphosphate filler for improving the fire resistance and smoke suppression of intumescent coatings J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-05 Shaowu Ke, Cheng Wang, Yongjun Shu, Junfeng Yang, Qilin Liang, Qi Zhang, Zhitian Liu
-
The impact of stainless steel flakes as a novel multifunctional pigment for wood coatings J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-04 Massimo Calovi, Stefano Rossi
-
Preparation and characterization of new antifouling coating based on alkyd paint modified with hydrophobic cationic biocide J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-03 Sergiy Rogalsky, Olena Moshynets, Oleg Dzhuzha, Oksana Tarasyuk, Anastasiia Hubina, Alina Madalina Darabut, Yevheniia Lobko, Iryna Morozovska, Oleksandr Protasov, Jean-François Bardeau
-
Hydrophobic phytic acid conversion layers for corrosion protection of steel surfaces J. Coat. Technol. Res. (IF 2.3) Pub Date : 2024-01-03 Michelle Weinert, Jochen S. Gutmann, Michael Dornbusch
-
Improved corrosion protection performance of electrophoretic epoxy coatings with the incorporation of amino-functionalized graphene oxide J. Coat. Technol. Res. (IF 2.3) Pub Date : 2023-12-29
Abstract In this study, polyethyleneimine (PEI) was grafted on the surface of graphene oxide (GO) to prepare PEI-GO material. The PEI-GO/EP composite coating was successfully deposited on carbon steel through the cathodic electrophoretic deposition (C-EPD) process. The zeta potential, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), atomic force