-
Hollow Spongy Phase Change Composite Fiber with Heat Storage Behavior via Photo-Thermal Transition Fibers Polym. (IF 2.5) Pub Date : 2024-04-16 Liang Wang, Qirui Lin, Liting Yuan, Zhenrong Zheng
-
Enhancing Antibacterial and Water-Repellent Properties for the Production of High-Performance Fabrics in Home Textiles Fibers Polym. (IF 2.5) Pub Date : 2024-04-16 Zeynep Omerogullari Basyigit, Hatice Coskun
-
Impact of NaOH Treatment on the Chemical, Structural, Physico-mechanical, and Thermal Characteristics of Jute Species Fibers Polym. (IF 2.5) Pub Date : 2024-04-15 Mohammad Abdullah Kaysar, Syed Jamal Ahmed, Abu Talib Md. Kaosar Jamil, Md. Mahmudul Habib, Md. Anisur Rahman Dayan, Mamun-Or-Rashid, Md. Abdul Gafur
-
Analysis of Hydrothermal Aging Water of Fire-Protective Fabrics Using GC × GC–TOFMS and FID Fibers Polym. (IF 2.5) Pub Date : 2024-04-15 Md. Saiful Hoque, Trevor Johnson, Paulina de la Mata, James J. Harynuk, Patricia I. Dolez
-
Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications Fibers Polym. (IF 2.5) Pub Date : 2024-04-15 Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra
-
Study on Preparation and Properties of CA/PLA Nonwoven Filter Materials Optimized by Response Surface Methodology Fibers Polym. (IF 2.5) Pub Date : 2024-04-15 Lisong Fu, Weixuan Ding, Li Zhang, Shujie Zhang
-
Towards the Development of One-Step Scalable Self-Cleaning and Stain-Resistant Coating on Cellulosic Wood Fibers Polym. (IF 2.5) Pub Date : 2024-04-15 Rashi Gururani, Sapan Kumar Pandit, Preeti Kumari, Aditya Kumar
-
Multifunctional Fabric Leveraging Coating of Bio-based Waterborne Polyurethane Fibers Polym. (IF 2.5) Pub Date : 2024-04-13 Yangyi Sun, Xue Tian, Zhijie Chen, Sheng Dai, Ningning Xiao, Neng Qian, Guowu Lin, Kunlin Chen, Dongming Qi
-
Slub Yarn Characterisation Using Newly Developed Diametric Fault System Fibers Polym. (IF 2.5) Pub Date : 2024-04-12 V. K. Yadav, S. M. Ishtiaque, S. D. Joshi, J. K. Chatterjee
-
Inkjet-Printed Flexible, Sensitive Humidity Sensor with High Breathability on Electrospun Nanofibrous Mats Fibers Polym. (IF 2.5) Pub Date : 2024-04-12 Yu Liu, Lei Xing, Hongze Zhu, Guangya Liu, Junyi Ren, Bin Sun
-
Preparation and Characterization of Chitosan/Hydroxyapatite Nanowire Composite Scaffolds for Bone Regeneration Fibers Polym. (IF 2.5) Pub Date : 2024-04-12 Kui Zhou, Rugang Hu, Hanjing Li, Hongwei Chen
-
Improved Plating Adhesion of Polyarylate Fibers via Supercritical CO2 and Impregnation of Slightly Soluble Oil on the Fiber Surface Fibers Polym. (IF 2.5) Pub Date : 2024-04-10 Tomoki Sakai, Isao Tabata, Teruo Hori, Kazumasa Hirogaki
-
An Investigation of Verbascum thapsus Flower as a Natural Source for Nylon 6 Fabric Dyeing Fibers Polym. (IF 2.5) Pub Date : 2024-04-09 Fatemeh Shahmoradi Ghaheh, Aminoddin Haji, Elham Tavakkol
-
Research Progress and Development Trend of Textile Auxiliaries Fibers Polym. (IF 2.5) Pub Date : 2024-04-09 Yating Ji, Xiaoyan Li, Kaili Jin, Zhuizhui Fan, Keru Hou, Peibo Du, Bi Xu, Zaisheng Cai
-
Preparation and Characterization of Graphene/Carbon Nano-Cellulose/Polyvinylidene Fluoride Electric Heating Membrane Fibers Polym. (IF 2.5) Pub Date : 2024-04-08 Peijun Huang, Yan Liu, Binjie Xin
-
Dyeing of Cotton and Wool Fibers with the Aqueous Extract of Alnus glutinosa: Evaluation of Their Ultraviolet Protection Factor, Their Color fastness and the Antioxidant Activity of the Aqueous Extract Fibers Polym. (IF 2.5) Pub Date : 2024-04-07
Abstract The aim of the present study is to evaluate the dyeing properties and behavior of the aqueous extract of Alnus glutinosa leaves when applied on cotton and wool fibers. The antioxidant activity and the total phenolic content of the aqueous extract were calculated. The colorfastness of the dyed samples such as washing, acid and alkali perspiration, wet and dry fastness and light fastness was
-
Solar-Responsive Bi2S3/ZnS Heterojunction-Loaded Chitosan/Cellulose Sponges for Adsorption-Photocatalytic Degradation of Congo Red Fibers Polym. (IF 2.5) Pub Date : 2024-04-05 Lei Xia, Jiaqi Zhao, Bowen Lu, Chang Liu, Xupin Zhuang
-
Modification of Poly(Lactic Acid) Non-Woven Fabric for Enhanced Oil–Water Separation Fibers Polym. (IF 2.5) Pub Date : 2024-04-05 Dongli Ren, Zidong Guo, Weiqiang Song, Zhenyu Guo, Hao Liu, Miaoming Huang, Wentao Liu
-
A Study of Structure–Property Correlation on Wet Spinning Conditions in Heat-Resistant Poly(m-phenylene isophthalamide) Hollow Fiber Membranes Fibers Polym. (IF 2.5) Pub Date : 2024-04-05 Jong-Uk Na, Min Ho Jee, Doo Hyun Baik
-
Optimizing Process Parameters in Drilling of CFRP Laminates: A Combined MOORA–TOPSIS–VIKOR Approach Fibers Polym. (IF 2.5) Pub Date : 2024-04-03 Tarakeswar Barik, Suchismita Parida, Kamal Pal
Carbon fiber-reinforced plastics (CFRP) have excelled in mechanical performance, replacing metals in structural design. However, their challenging machinability especially in drilling for assembly necessitates careful optimization of process parameters for mass production efficiency and waste reduction. This study explores the optimization of the drilling process for carbon fiber-reinforced composite
-
Superhydrophilic and Oil-Resistant SiO2/PU Fiber Membrane for Oil-In-Water Emulsion Separation under Gravity Fibers Polym. (IF 2.5) Pub Date : 2024-04-03
Abstract A polyurethane membrane with interlayer channels was developed through electrospinning to separate oily sewage. To enhance its hydrophilicity, hydrophilic silica particles were grafted onto the fiber surface, creating a rough surface. This was done by treating the membrane with oxygen plasma to generate active sites, which were then coupled with 3-aminopropyltriethoxysilane, followed by adding
-
Optimization Study of the Mixing Ratio of Multi-scale Carbon Fibers Composite for Toughness of Oil Well Cement Fibers Polym. (IF 2.5) Pub Date : 2024-04-02 Xiaoliang Wang, Rongyao Chen, Mingbiao Xu, Man Shu, Zhong Yin, Feixu Dai
This article aims to enhance the toughness performance of oil well cement with an optimized mixing ratio of three different lengths of carbon fibers optimized by response surface methodology. A response surface model was constructed with the impact strength as the response target based on the Box–Behnken design. The influence of carbon fiber mixtures on the impact strength of oil well cement was studied
-
A Quality Prediction Method for Dual-Nozzle FDM Molded Parts Based on CIWOA–BP Fibers Polym. (IF 2.5) Pub Date : 2024-04-01 Binghui Ji, Mengyang Cui, Jian Mao, Bo Qian
The fused deposition molding (FDM) process can manufacture complex molded parts based on molten filaments. The quality of parts molded by this process is measured primarily by tensile strength, flexural strength, and surface roughness. Due to the complexity and variety of FDM process parameters, there is a nonlinear variation relationship between the combination of process parameters and the quality
-
Effect of Esterification of Natural Dyes with Glycosides on Dyeing Properties of Natural Fibers in Supercritical Carbon Dioxide Fibers Polym. (IF 2.5) Pub Date : 2024-03-30 Jiwei Xu, Hongjuan Zhao, Qian Zhao, Xiaoqing Xiong, Laijiu Zheng, Chengqi Jiao
The color-rendering abilities of esterified natural dyes are influenced by the structure of their parent dyes and the position at which the ester group is introduced, resulting in low efficiency in screening and synthesizing suitable esterified natural dyes for dyeing natural fibers with supercritical carbon dioxide. In this study, density functional theory was used to quickly screen the parent natural
-
Fabrication of the Flexible, Biocompatible, and Permeable Graphene/PLA Strain Sensor for Wearable Devices Fibers Polym. (IF 2.5) Pub Date : 2024-03-30 Zhigang Bao, Zhenglu Liu, Bin Sun
Real-time human motion monitoring is of importance particularly for patients after surgery, and wearable devices should be chemically inert, nontoxic, and biocompatible to human body, and should possess high sensitivity. However, it is still a challenge to integrate such advantages into one devices. Here we provided a flexible strain sensor based on graphene with polylactic acid (PLA) fibrous membrane
-
A Sulfonic-Functionalized Cellulose Adsorbent for the Rapid Removal of Cerium (III) from Aqueous Solutions Fibers Polym. (IF 2.5) Pub Date : 2024-03-28
Abstract The biodegradable biomass adsorbent (cellulose-g-PSS) was synthesized in LiCl/N, N-dimethyl acetamide by the free-radical grafting polymerization reaction between sodium styrene sulfonate (SSS) and cellulose. Systematic optimization was conducted on many reaction parameters, including reaction time, monomer dosage, and reaction temperature. The grafting yield of cellulose-g-PSS was 50.16%
-
Anti-fouling and Hydrophobic Polyurethane Fibrous Membrane for Air Purification Under High Humidity Conditions Fibers Polym. (IF 2.5) Pub Date : 2024-03-25
Abstract With the rapid development of urbanization and industrialization, air pollution is increasingly harmful to life on earth. At present, purifying polluted air through functional filter materials is an effective but still challenging and important strategy. But there was the problem that the air filter protection materials are easy to get wet, which will reduce the filtering effect and cause
-
Evaluation and Trend of Smart Clothing Research: Visualization Analysis Based on Bibliometric Analysis and Quantitative Statistics Fibers Polym. (IF 2.5) Pub Date : 2024-03-21 Zhe-Hui Lin, Pei-Jie Chen
-
Advancements in Cotton Textile Design: Addressing Temperature and Moisture Challenges Fibers Polym. (IF 2.5) Pub Date : 2024-03-21 Zeynep Omerogullari Basyigit, Cemre Nur Kuyucak, Hatice Coskun
-
Preparation of the Composite Yarn PEDOT:PSS/rGO/PAN/DL and Its Application in Sodium-Ion Detection Fibers Polym. (IF 2.5) Pub Date : 2024-03-19 Zhilei Li, Jianping Zhou, Yan Xu, Yukui Shang, Changhua Chen, Tongtong Ran
-
An Evaluation of the Beneficial Effects of Polyamide 6's Thermal Stabilization by Ferric Chloride Complexation as a Novel Carbon Fiber Precursor Fibers Polym. (IF 2.5) Pub Date : 2024-03-19
Abstract This study investigated the impact of stabilization time on pretreated polyamide 6 (PA6) fibers using various analytical techniques, including thermal analysis (TGA and DSC), infrared (IR) spectroscopy, X-ray diffraction (XRD), tensile testing, and density measurements. The two-step atmospheric air-based stabilization process for pretreated PA6 multifilament bundles involved initial thermal
-
Specific Fabric Properties Elicit Characteristic Neuro and Electrophysiological Responses Fibers Polym. (IF 2.5) Pub Date : 2024-03-18 Mahendran Balasubramanian, Thamizhisai Periyaswamy
-
Flexible Tin-Based Carbon Nanofiber as Binder-Free Electrodes for Sodium-Ion Battery Fibers Polym. (IF 2.5) Pub Date : 2024-03-14
Abstract Flexible batteries are promising in the fields of flexible electronic products, wearable devices and even implantable medical devices. Carbon nanofibers are considered to be the matrix of active material in flexible electronics. Herein, to attain better flexibility and higher energy density, electrospun carbon nanofibers embedded with Sn were used as flexible anode for sodium-ion battery.
-
Design, Synthesis, Characterization, and Antimicrobial Properties of New Azo Disperse Dyes Incorporating Quinazolinone-Pyrazolone Moieties and Their Applications for Dyeing of Polyester Fabrics Fibers Polym. (IF 2.5) Pub Date : 2024-03-14
Abstract The current study outlines a straightforward and efficient method for creating new quinazolinone disperse dyes based on pyrazolone moieties, starting with quinazolinone and a variety of substituted pyrazolone as couplers. The synthesized dyes were characterized using a variety of spectroscopic and analytical methods. The synthesized dyes' ultraviolet–visible spectra showed bands brought on
-
Designing of Antipyrine-Based Azo Dyes with Cyclic Dione Scaffolds for Application in Cotton Dyeing and Microbial Resistance Fibers Polym. (IF 2.5) Pub Date : 2024-03-13 Kanchan R. Damade, Dhananjay H. More
-
Acetylation of Kapok Fibres as an Oil Absorbent for Oil Spill Mitigation Fibers Polym. (IF 2.5) Pub Date : 2024-03-08 Ke Wei Law, Yong Hui Tan, John Beardall, Michelle Oi Yoon Soo
-
Investigating of Vibration Properties of Aluminum Plates in Radii of Different Curvatures Reinforced with Glass Fibers by Modal Analysis Method Experimentally and Numerically Fibers Polym. (IF 2.5) Pub Date : 2024-03-06 Amin Jafari, Amir Hossein Kazemian, Hossein Rahmani
-
Investigation of the Spike Penetration Resistance of the Weft-Knitted Fabrics with Different Elasticity Ratio Fibers Polym. (IF 2.5) Pub Date : 2024-03-06 Zahra Farajzadeh, Fatemeh Ghasemi, Fatemeh Mousazadegan, Nazanin Ezazshahabi
-
Enhancing the Mechanical Properties of Basalt Fiber and Stainless Steel Wire Mesh Composites Incorporating Fire Retardants Through Response Surface Methodology Optimization Fibers Polym. (IF 2.5) Pub Date : 2024-03-05
Abstract The primary objective of this research is to examine the impact of the mechanical properties of basalt fiber-reinforced polymer composites on the naval sector. The reinforcement material employed in this study consisted of bidirectional basalt fiber and stainless steel wire mesh. The matrix material employed in this study was bismaleimide resin. A total of nine distinct compositions were generated
-
Valorization of Natural Dye Extracted from Date Palm Pits (Phoenix dactylifera) for Ecofriendly Dyeing of Bicomponent Polyester Filaments Fibers Polym. (IF 2.5) Pub Date : 2024-03-05
Abstract Bicomponent (PET/PTT) filaments have excellent elastic recovery, elasticity, thermal comfort, etc., which make them appropriate for use in sports clothing. As they are dyed with chemical dyestuffs, it could cause a great harm to human health. In this context, this paper investigates the possibility of dyeing PET/PTT with a natural colorant obtained from date palm pits (DPP). This natural dye
-
Deep Eutectic Solvent Dyeing of Cellulose Acetate Nanofibers with Disperse Dyes: Kinetics, Isotherm, and Thermodynamic Studies Fibers Polym. (IF 2.5) Pub Date : 2024-03-05 Winges Fatima, Muhammad Tarique, Sadam Hussain, Xinran Shi, Xujing Wang, Wardah Ahmed, Icksoo Kim, Kai Wei
-
A New Lotus-Leaf-Inspired Beaded Nanofiber Strategy for the Development of Cryogel/Nanofiber Hybrid Structures Fibers Polym. (IF 2.5) Pub Date : 2024-03-05 Dilayda Kanmaz, Bilgen Osman, Esra Karaca
-
Surface Modification of Paper by TiO2-PDMS-KH550 Coating with Superhydrophobic, Self-cleaning and Oil/Water Separating Properties Fibers Polym. (IF 2.5) Pub Date : 2024-03-04 Suwanna Kupalang, Nattakan Kanjana, Jiraprapa Wola, Paveena Laokul
-
Performance Evaluation of Carbonized Vermiculite–Polycarbonate Nanofibrous Adsorbent for Congo Red Removal Fibers Polym. (IF 2.5) Pub Date : 2024-03-04 Sohrab Ali Ghorbanian, Samaneh Bagheri Renani, Hooman Fatoorehchi, Fateme Molajafari, Payam Zahedi
-
Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications Fibers Polym. (IF 2.5) Pub Date : 2024-03-04
Abstract This study focuses on developing and examining the abrasive wear attributes of a unique epoxy composite reinforced with four fibers: rice straw (RS), coconut coir (CC), sugarcane bagasse (SB), jute fiber (JF), and one filler as neem wood powder (NWP). By altering the percentages of coconut coir, sugarcane bagasse, rice straw, and NWP, four types of composites A1, B2, C3, and D4 were created
-
Three-Dimensional Polyacrylonitrile Nanofibrous Sponge with In Situ Grown ZIF-67 for Activating Peroxymonosulfate to Degrade Organic Contaminants Fibers Polym. (IF 2.5) Pub Date : 2024-03-02 Shijie Lou, Qiqi Weng, Xinyi Li, Shiqi Ding, Xinhan Miao, Yifan Wu, Guojun Jiang, Xiangyu Ye
-
Hybrid Metal/Composite Structures Under Quasi-static Axial Compression Loads: A Comparative Study Fibers Polym. (IF 2.5) Pub Date : 2024-03-02 Mahmoud M. Awd Allah, Mohamed I. Abd El Aal, Marwa A. Abd El-baky
-
Nature-Inspired Fluorine-Free Robust Superhydrophobic Fabrics Fibers Polym. (IF 2.5) Pub Date : 2024-03-02
Abstract The practical implementation of superhydrophobic surfaces in oil–water separation, antifouling, and self-cleaning has been severely hampered by the incorporation of hazardous components and their limited durability. In this study, a straightforward immersion process was employed to incorporate different-sized ZnO particles onto a nonwoven substrate, resulting in the creation of a multi-layered
-
The Influence of Glass Fiber and Copper Wire z-Binder on the Mechanical Properties of 3D Woven Polymeric Composites Fibers Polym. (IF 2.5) Pub Date : 2024-03-02
Abstract Three-dimensional composites (3D) have potential applications in various fields due to their enhanced properties compared to conventional two-dimensional composites (2D). This study investigates the effect of different volumes of z-binder made from copper wire and E-glass fiber on the mechanical properties of 3D woven polymeric composites. The tensile, flexural, and fracture toughness behavior
-
A Controllable and Effective Method to Prepare Nano-LnMOFs Film on Silk Fabric and Extend the Temperature-Sensing Range Fibers Polym. (IF 2.5) Pub Date : 2024-03-02 Xingfang Xiao, Lipei Ren, Ruina Liu, Zheng Li, Chenggen Zhang, Yanhong Lu, Shujun Wang, Weilin Xu
-
Gold Nanoparticles-Incorporated Electrospun Nanofibrous Membrane for Optical Biosensing Applications: An Experimental and Computational Approach Fibers Polym. (IF 2.5) Pub Date : 2024-03-01
Abstract Paper-based biosensing platforms are the leading area of research today. In this work, a platform for biosensing applications with improved detection capability has been prepared using gold nanoparticles (AuNPs) incorporated in electrospun nanofibers. The computational study results demonstrated that the addition of AuNPs brings about better stability to the polymer complex, and the energy
-
Influence of Varied MWCNTs Dispersion on EMI Shielding, UV Absorption, and Surface Properties of Electroless NiP/MWCNT-Coated UHMWPE Fabric Fibers Polym. (IF 2.5) Pub Date : 2024-02-29
Abstract The poor EMI shielding ability, limited UV resistance, and weak interfacial adhesion have restricted the use of Ultra-high molecular weight polyethylene (UHMWPE) fabric in ballistic, aviation, and other applications. To overcome these drawbacks, the present study proposes an electroless composite coating (NiP/MWCNT) on UHMWPE fabric surface with different weight propositions of MWCNTs (1 mg/L
-
Effects of Natural Fiber Waste, Content, and Coupling Agent on the Physical and Mechanical Properties of Wood Species–Plastic Composites as Green Materials Fibers Polym. (IF 2.5) Pub Date : 2024-02-29 Sriwan Khamtree, Chainarong Srivabut, Santi Khamtree, Roihatai Kaewmai
-
Electrospun Nano-boron–Ammonium Dinitramide Core–sheath Nanofibers Fibers Polym. (IF 2.5) Pub Date : 2024-02-29 Hao Peng, Xiaolan Song, Dan Song, Yi Wang, Chongwei An, Chunwang Luo
-
An Effective Modification for Enhancing Bio-functionality and Coloration of Silk Fabrics with Chitosan/Alpha-Lipoic Acid Conjugates Fibers Polym. (IF 2.5) Pub Date : 2024-02-28 Xuemei He, Ting Zhu, Zhengkang Zhang, Lu Cai, Haiyan Mao
-
Fatigue Behavior of Carbon Fiber Woven Composite Laminates with Different Off-Axis Angles Studied by Combining Infrared Thermography Fibers Polym. (IF 2.5) Pub Date : 2024-02-28
Abstract This study employed infrared thermography to investigate the fatigue properties of plain-woven composites under various off-axis orientations. The specimens underwent constant amplitude fatigue loading at stress levels set at 80%, 75%, and 70% of the ultimate tensile strength, maintaining a stress ratio of 0.1. The experimental findings indicated a decline in both tensile strength and fatigue
-
Layered Core–Shell Structured Yarn Containing Internal Graphene Layers for Flexible Sensors Fibers Polym. (IF 2.5) Pub Date : 2024-02-28 Xin Gao, Hongyuan Wang, Hailin Zhu, Jian Wang, Yanhong Yan, Lili Zhang, Yuanmiao Feng, Yuan Yu
-
Degumming of Yuli Apocynum Fibers Using Hydrogen Peroxide and Biocatalysts Besides Factory Pilot Evaluation Fibers Polym. (IF 2.5) Pub Date : 2024-02-28 Haisheng Gui, Yingao Li, Fan Yang, Hui Zhao, Lixia Jia
-
Bending and Shear Property of Fabrics Produced from Trevira CS and Its Blends Fibers Polym. (IF 2.5) Pub Date : 2024-02-27 M. Bharani, R. V. Mahendra Gowda, C. Prakash
-
Exploring the Role of Ag Nanoparticle Distribution in Novel pH-Sensitive Nanofibers Containing Hyaluronic Acid for Enhanced Wound Healing with Sustained Curcumin Release Fibers Polym. (IF 2.5) Pub Date : 2024-02-27 Zahra Sayyar, Mahsa Khadem Sadigh