-
Study on pin temperature and wear behaviour of plasma sprayed Ni-Cr coatings with nano Al2O3 particle Trans. IMF (IF 1.9) Pub Date : 2024-03-22 C. R. Raghavendra, K. P. Jhansilakshmi
In this study, the dry sliding wear behaviour of plasma sprayed composite Ni-Cr coatings with nano Al2O3 particle concentrations of 0, 5, 10, 15, 20, and 100 wt.% on Al6061 substrate material was a...
-
Effects of NaH2PO2 concentration and deposition potential on microstructural characteristics and corrosion properties of electrodeposited amorphous Fe–P coatings Trans. IMF (IF 1.9) Pub Date : 2024-03-19 Shuai Zhang, Jing Yu, Yuetong Li, Zhengda Liu
This study reports the influence of NaH2PO2 concentration and deposition potential on the microstructural characteristics and corrosion properties of fully amorphous electrodeposited Fe–P coatings....
-
Effect of hydrogen embrittlement on the tribo-mechanical properties of TiN coated aluminium alloys Trans. IMF (IF 1.9) Pub Date : 2024-03-15 Ho-Seong Heo, Dong-Ho Shin, Hyun-Kyu Hwang, Seong-Jong Kim
In this research, the effects on tribological properties of titanium nitride (TiN) coating by hydrogen embrittlement were investigated. TiN was deposited to about 2.5 μm on aluminium alloy by arc i...
-
Research into sustainable surface finishing at the University of Leicester Trans. IMF (IF 1.9) Pub Date : 2024-03-05 H. Hilton-Tapp, S. Viles, S. Paul, R. Mesalam, D. Weston, K. S. Ryder
Sustainability is at the forefront of all research carried out at University of Leicester. There are three main groups contributing to the surface finishing effort: the Centre for Sustainable Mater...
-
Arne Tiselius (1902–1971), a pioneer in electrophoresis, leading to our better understanding of electrohydrodynamics Trans. IMF (IF 1.9) Pub Date : 2024-02-21 F. C. Walsh
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 102, No. 2, 2024)
-
IMF News Trans. IMF (IF 1.9) Pub Date : 2024-02-20
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 102, No. 2, 2024)
-
Sol–gel derived highly hydrophobic Polystyrene/SiO2 spray coatings on polished stainless steel and textured aluminium substrates Trans. IMF (IF 1.9) Pub Date : 2024-02-20 J. Sharma, A. Bhandari, S. Jangra, M.S. Goyat
In this study, sol–gel derived spray coatings of highly hydrophobic nature consisting of polystyrene (PS) and SiO2 nanoparticles were developed on polished stainless steel 321 (SS) and textured 606...
-
The growth and corrosion resistance of MgAl layered double hydroxide films on the surface of LA43M Mg-Li alloy Trans. IMF (IF 1.9) Pub Date : 2024-02-19 J. Zhang, D. Lian, J. Li, M. Zhang, Z. Wang, J. Wu, C. Wang
To investigate the effect of hydrothermal reaction time on the structure and properties of layered double hydroxides (LDH) films on the surface of Mg alloys, LDH films with different time (12, 18, ...
-
Self-healing properties of microencapsulated linseed oil-poly(urea formaldehyde) additives embedded polyester coating on Galvalume steel sheet Trans. IMF (IF 1.9) Pub Date : 2024-02-16 Sushant Bhardwaj, Nitu Rani, Arun Kumar Singh, Ankita Chauhan, Rishabh
Linseed oil and poly(urea-formaldehyde)-based microcapsules with an 82% weight ratio of core/shell and a mean outer diameter of about 100 μm were synthesised by in-situ polymerisation. These microc...
-
Estimation of indenter depth during frictional treatment of nickel-based coatings using optical profilometry Trans. IMF (IF 1.9) Pub Date : 2024-02-16 N. N. Soboleva, N. A. Davydova, A. V. Makarov
The paper determines the effect of frictional treatment of nickel-based coatings of different initial hardness on the degree of their hardening and the depth of the indenter's impact on the surface...
-
Effect of silicon content on microstructure and mechanical properties of AlSi alloy coating obtained by physical vapour deposition Trans. IMF (IF 1.9) Pub Date : 2024-02-13 E. Saoudi, R. Younes, N. Mesrati, M. Ouchabane, L. Baiamonte, M. A. Bradai
Several contents of silicon in AlSi coatings, and substrate nature, were investigated in this present research. For this purpose, thin films were deposited by Physical Vapour Deposition onto three ...
-
Slurry erosion behaviour of AlCoCrFeNi high entropy alloy coating prepared by atmospheric plasma spraying Trans. IMF (IF 1.9) Pub Date : 2024-01-22 N. Noble, N. Radhika, M. Sathishkumar, A. K. Basak
This study explores the application of AlCoCrFeNi high entropy alloy (HEA) coating on the SS316L steel using atmospheric plasma spraying to enhance durability in erosive environments. Annealing the...
-
Report of the IMF President to the AGM, November 2023 Trans. IMF (IF 1.9) Pub Date : 2024-01-19 Karl S. Ryder
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 102, No. 1, 2024)
-
15th EDNANO (International Workshop on Electrodeposited Nanostructures) integrating EAST Forum 2023 Trans. IMF (IF 1.9) Pub Date : 2024-01-19 Peter Leisner
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 102, No. 1, 2024)
-
Janus particles: features, synthesis and potential uses, including surface functionalisation Trans. IMF (IF 1.9) Pub Date : 2024-01-19 F. C. Walsh
As the development of nanostructured materials continues to blossom, there is increasing attention to functionalised particles. The so-called Janus particles are anisotropic regions having differen...
-
A simple one-step method to synthesise CuO films having different morphologies for flexible supercapacitor electrodes Trans. IMF (IF 1.9) Pub Date : 2024-01-19 Daming Sun, Masaharu Nakayama, Haisen Qin, Dan Liu, Zhifan Wang, Ziyi Zhang, Bo Zhou, Pingping Liu
Copper oxide (CuO) films with a thickness of about 1.5 μm having three different morphologies (nanoplate, nanoflake and nanowire) were synthesised by a simple and fast chemical method. Scanning ele...
-
Zn–Cr pulse plated alloy coatings for corrosion protection Trans. IMF (IF 1.9) Pub Date : 2024-01-19 E. Osuchowska, Z. Buczko
The influence of the Zn–Cr electrodeposition bath composition, cathode current density under direct current conditions, and the average pulse current density and the current density under pulse pla...
-
Synthesis and characterisation of self-lubricating tungsten nitride thin films as protective machine tool coatings Trans. IMF (IF 1.9) Pub Date : 2024-01-19 Sri Bharani Ghantasala, Sumitra Sharma
WN thin films were synthesised on silicon (100) substrate by varying the nitrogen flow rate (NFR) at a substrate temperature of 300°C for the initial 15 min using RF magnetron sputtering. With the ...
-
Comparing brightness of nanocrystalline nickel coating with traditional bright nickel coating and investigation of stereochemistry of brightener molecules Trans. IMF (IF 1.9) Pub Date : 2024-01-19 Aylar G. M. Ghashghaei, Mohammad Ebrahim Bahrololoom
Nanocrystalline nickel coatings can be electrodeposited by using grain refiners like saccharin which consequently increase the gloss of the coating. Also, brighteners can produce bright coatings. T...
-
Tribological study on cast iron based, graphite and CNT enriched hybrid HVOF coating from room temperature to 300°C Trans. IMF (IF 1.9) Pub Date : 2024-01-19 Sonia Dangi, R. S. Walia, N. M. Suri, Sumit Chaudhary
In this article, eco-friendly graphite has been produced from carbonised rice husk, an environmental waste. Graphite, carbon nanotube (CNT) and cast iron powder were blended to produce the hybrid c...
-
Characterisation and wear behaviour of SiC reinforced FeNiCrMo composite coating by HVOF process Trans. IMF (IF 1.9) Pub Date : 2024-01-19 C. Durga Prasad, S. Kollur, M. Nusrathulla, G. Satheesh Babu, M. B. Hanamantraygouda, B. N. Prashanth, N. Nagabhushana
Analysis of the sliding wear and microstructural characteristics of iron based composite coatings are discussed. The feedstock, which consisted of 30% SiC and 70% FeNiCrMo, was mechanically combine...
-
Ultra-low Pt loading catalyst on (Nb–Ti)2AlC support as advanced material for low-temperature fuel cell application Trans. IMF (IF 1.9) Pub Date : 2023-11-23 A. Petričević, V. D. Jović, M. N. Krstajić Pajić, M. Marzec, M. Gajewska, P. Zabinski, N. R. Elezović
The oxygen reduction reaction was investigated at 10 monolayers (MLs) of Pt electrodeposited on (Nb–Ti)2AlC substrate. Following the discussion of detailed kinetics and electrodeposition optimisati...
-
Industry News Trans. IMF (IF 1.9) Pub Date : 2023-11-02
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 6, 2023)
-
Transactions of the institute of materials finishing 2023, volume 101Author Index Trans. IMF (IF 1.9) Pub Date : 2023-11-02
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 6, 2023)
-
Editorial Trans. IMF (IF 1.9) Pub Date : 2023-11-02 Clive Larson
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 6, 2023)
-
Subject Index Trans. IMF (IF 1.9) Pub Date : 2023-11-02
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 6, 2023)
-
Annual Contents 2023 Trans. IMF (IF 1.9) Pub Date : 2023-11-02
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 6, 2023)
-
Sustainable cleaning solutions for improved profitability and reduced CO2 footprint Trans. IMF (IF 1.9) Pub Date : 2023-08-29 Brandon Lloyd
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 5, 2023)
-
Dr David Arrowsmith FIMF Trans. IMF (IF 1.9) Pub Date : 2023-08-23 Keith Dennis
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 5, 2023)
-
Electrochemical deposition of a biofunctionalised silver and strontium substituted hydroxyapatite nanocomposite coating on a β-type titanium alloy Trans. IMF (IF 1.9) Pub Date : 2023-08-18 Azadeh Esmaeil Nejad, Hanieh Nojehdehian, Amir Pasha, Negin Nikmanesh
As a result of hydroxyapatite’s (HAp) similarity to the mineral component of bone, it has been extensively investigated for biomedical application. To mimic the non-stoichiometric hydroxyapatite of...
-
Multi-scan cyclic voltammetry to roughen the surface of copper foil for application in copper-clad laminates Trans. IMF (IF 1.9) Pub Date : 2023-07-31 Xinyu Gong, Yujia Chen, Guang Yu, Ni Wang, Wencheng Hu
Multi-scan cyclic voltammetry is proposed to prepare copper foils with a matte side for use in copper-clad laminates (CCLs). During multi-scan cyclic voltammetry at −1 V ∼ 0.5 V at 80°C, the shiny ...
-
Impact of the phosphorus concentration on the morphological and corrosion behaviour of Ni-P, Co-P and Co-Ni-P electrodeposits Trans. IMF (IF 1.9) Pub Date : 2023-07-27 Y. Messaoudi, H. Belhadj, M. R. Khelladi, A. Redjechta, A. Azizi
ABSTRACT This work reports the results of a study on the effect of NaH2PO2 concentration as a phosphorus source on the properties of the Ni-P, Co-P and Co-Ni-P electrodeposits compared to Ni, Co and Co-Ni deposits. Binary and ternary alloys were electrodeposited from sulphate baths without additives at room temperature. The elementary analysis of the alloys determined by X-ray fluorescence spectroscopy
-
Selection of a suitable environmentally friendly (non-toxic) etching solution in the electroless metallisation of ABS polymers Trans. IMF (IF 1.9) Pub Date : 2023-07-25 M. Georgieva, D. Lazarova, M. Petrova, Ek. Dobreva
Electroless metallisation is a modern method for obtaining thin layers of metals and their alloys on various dielectric materials, which are increasingly used in various industries. One of the impo...
-
Effect of nitriding nitrogen pressure on the structural, morphological, mechanical and tribological properties of plasma nitrided hard chromium electroplated layer Trans. IMF (IF 1.9) Pub Date : 2023-07-07 S. Mokhtara, M. Zidani, M.M. Alim, S. Mechachti, S. Messaoudi, L. Mebarki
ABSTRACT This paper investigates the structural, morphological, mechanical and tribological properties of a hard chromium electroplated layer plasma nitrided in a pure nitrogen atmosphere at three different nitrogen pressures: 3.5, 4 and 5 Torr for 90 minutes at 600°C. The results showed that after plasma nitriding at 4 and 5 Torr, a well-defined Cr2N layer with a rough and porous morphology was created
-
Electrochemical characteristics and damage behaviour of DLC-coated 316L stainless steel for metallic bipolar plates of PEMFCs Trans. IMF (IF 1.9) Pub Date : 2023-06-29 Shin Dong-Ho, Kim Seong-Jong
A diamond-like carbon (DLC) coating was deposited on the surface of 316L stainless steel using the arc ion plating (AIP) method to improve the life and efficiency of the metallic bipolar plate for ...
-
Thermal oxidation of Ni – 40 wt.% W and Ni – 50 wt.% W coated copper Trans. IMF (IF 1.9) Pub Date : 2023-06-29 C.N. Panagopoulos, E.P. Georgiou, G.D. Plainakis
ABSTRACT This work focuses on the oxidation behaviour of Ni-W electrodeposited coated copper, containing approximately 40 and 50 wt.% tungsten and having a thickness of about 15 µm. The oxidation kinetics of these materials were evaluated by performing isothermal oxidation tests in air, at different temperatures (from 550 up to 850°C) and for different durations (20 min up to 2 h). From the experimental
-
Growth process and mechanism of hot-dip galvanised Zn–5Al coating on steel Trans. IMF (IF 1.9) Pub Date : 2023-06-29 Yang Li, Gang Kong, Chunshan Che, Delin Lai
ABSTRACT In this paper, the growth process and mechanism of hot-dip galvanised Zn–5Al coating on steel at different bath temperatures and immersion times were investigated by using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The result shows that the growth of Zn–5Al coating is approximately divided into three stages: initial incubation stage
-
Corrosion protection behaviour of electrogalvanised steel sheet by tetravalent vanadium ion Trans. IMF (IF 1.9) Pub Date : 2023-06-23 Takeshi Matsuda, Shinichi Furuya, Rie Kaneko, Koji Fushimi
The corrosion protection behaviour of electrogalvanised steel sheets (EG) by the tetravalent vanadium ion was investigated. Immersion of the bare EG in a NaCl solution revealed that the addition of...
-
Effects of PVD deposition method on electrochemical properties and interfacial contact resistance of CrN coated titanium as PEMFC bipolar plate Trans. IMF (IF 1.9) Pub Date : 2023-06-23 Ho-Seong Heo, Seong-Jong Kim
ABSTRACT In this research, CrN coating was applied to grade 1 titanium as a bipolar plate for PEMFC. The CrN was deposited by ion beam assisted deposition (IBAD) and the arc ion plating method (AIP). The thickness of the coating layer was about 2.5∼3 μm and it was densely deposited on the titanium substrate. The electrochemical experiments were conducted in an aqueous solution of pH 3 (H2SO4 + 0.1 ppm
-
Corrosion - theory and practice Trans. IMF (IF 1.9) Pub Date : 2023-06-22 Brenda Peters
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 4, 2023)
-
Editorial Trans. IMF (IF 1.9) Pub Date : 2023-06-22 Clive Larson
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 4, 2023)
-
Characteristics and corrosion resistance of hard-anodised 6061-T6 aluminium alloy Trans. IMF (IF 1.9) Pub Date : 2023-06-22 S. H. Mohitfar, M. R. Etminanfar, S. Mahdavi, J. Khalil-Allafi
ABSTRACT Hard anodic coatings were formed on 6061-T6 aluminium alloy samples using direct current. Surface morphology and cross-section of coatings, as well as their hardness and corrosion behaviour, were studied. It was found that decreasing the applied current density from 55 to 35 mA cm−2 resulted in more uniform coatings with fewer surface defects, lower porosity, and higher hardness values. The
-
15th International Workshop On Electrodeposited Nanostructures Trans. IMF (IF 1.9) Pub Date : 2023-06-20
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 4, 2023)
-
Optimisation of a Ce–Mn co-doped SnO2–Sb anode based on a nanotubular TiO2 array for electrochemical decolourisation of wastewater Trans. IMF (IF 1.9) Pub Date : 2023-06-16 Shengyan Ge, Mengyao Shao, Xingfu Zhou
ABSTRACT In this study, Ce and Mn co-doped SnO2–Sb electrode was prepared onto a Ti/TiO2 nanotubes surface. The nanostructure of the novel electrode was characterised by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive spectroscopy (EDS), and specific techniques were used to study the electrochemical characteristics of the electrode. SEM analysis results showed that
-
High temperature erosion performance of NiCrAlY/Cr2O3/YSZ plasma spray coatings Trans. IMF (IF 1.9) Pub Date : 2023-06-02 G. M. S. Reddy, C. D. Prasad, P. Patil, G. Shetty, N. Kakur, M. R. Ramesh
ABSTRACT The current investigation's objective was to assess the air jet erosion tester's ability to measure the erosive behaviour of plasma sprayed coatings on titanium-15 alloy. 65% NiCrAlY, 30% Cr2O3, and 5% YSZ make up the coating's chemical composition. A study of microstructure and phases was carried out. Microhardness and adhesive strength have both been measured in this work. With impact angles
-
Investigation on the effect of nickel and nickel-chromium alloy pulse current plating on copper substrate Trans. IMF (IF 1.9) Pub Date : 2023-06-01 Canute Sherwin, Sudip Chakraborty, K. Raju, Suma Bhat, Sudheendra P. Hebbar
ABSTRACT In the present study, nanocrystalline nickel (Ni) and nickel-chromium (Ni-Cr) alloy coatings were developed on copper (Cu) substrate using pulse current. The pulse current parameters include a cycle time of 240 milliseconds at a duty cycle of 0.5 and 4.17 Hz frequency. The surface morphology, texture, hardness, scratch resistance and porosity were investigated for different coatings developed
-
Designing effective plating baths for use in the pulse-reverse plating of copper nanocomposite coatings Trans. IMF (IF 1.9) Pub Date : 2023-05-31 H. Hilton-Tapp, J. Kelly, D. Weston
ABSTRACT The development of the process to produce Metal Matrix Nanocomposite (MMNC) coatings can provide opportunity for the enhancement of mechanical and electrical properties. This research uses speciation-simulating software to screen formulations for producing nanocomposites by pulse-reverse plating (PRP). PRP is used as a controlled delivery mechanism to attract a high concentration of nanoparticles
-
Pulsed electrochemical deposition of calcium phosphate coatings for biomedical applications Trans. IMF (IF 1.9) Pub Date : 2023-05-11 F. Lissandrello, L. Magagnin
ABSTRACT Calcium phosphate coatings have been widely used in orthopaedic and dental implants due to their excellent bioactivity and ability to promote formation of new bone tissue. Among the techniques used to manufacture these materials, electrochemical deposition has emerged as a promising method due to several benefits, such as improved compositional control, coating uniformity, versatility, and
-
Improved performance of electrodes for alkaline electrolysis Trans. IMF (IF 1.9) Pub Date : 2023-04-20 Morten Linding Frederiksen, Marcus Viktor Kragh-Schwarz, Anders Bentien, Lars Pleth Nielsen
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 3, 2023)
-
Optimisation and analysis of jet impingement erosion behaviour of composite titanium based electroless nickel ENi-P coated naval steel (AH36) Trans. IMF (IF 1.9) Pub Date : 2023-04-17 R. Anthoni Sagaya Selvan, Dinesh G. Thakur, M. Seeman, V. Balasubramanian, R. Muraliraja
ABSTRACT This paper aims to address the impact of jet impingement on nano titanium-based ENi-P composite coatings deposited through electroless deposition on AH36 steel through Taguchi design of experiments. L9 Taguchi DOE was utilised to synthesise nine coatings by varying the four process parameter combinations suggested by the technique. Jet impingement combined with AFS 50/70 quartz sand erosion
-
Anne Chapman FIMF (1931–2023) Trans. IMF (IF 1.9) Pub Date : 2023-04-17
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 3, 2023)
-
The Schwäbisch Gmünd Prize for Young Scientists 2023 Trans. IMF (IF 1.9) Pub Date : 2023-04-14 Peter Leisner
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 3, 2023)
-
Prof. Samuel James Harris (8 January 1936–18 January 2023) Trans. IMF (IF 1.9) Pub Date : 2023-04-13
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 4, 2023)
-
Effects of microstructure and nanohardness of 8Cr4Mo4V steel under high-dose-rate N-PIII Trans. IMF (IF 1.9) Pub Date : 2023-04-04 Bin Miao, Xinghong Zhang, Xinxin Ma
ABSTRACT Nitrogen ion implantation with different dose rates was conducted on 8Cr4Mo4V-bearing steel in the present study. The effects of high-dose-rate nitrogen plasma immersion ion implantation (N-PIII) on the microstructure and nanohardness of the 8Cr4Mo4V-bearing steel were studied. The surface morphology, phase microstructure, lattice parameters and nanohardness were investigated by scanning electron
-
Structural and morphological characteristics of nanocrystalline palladium deposits prepared from ammonia complex by electrodeposition technique Trans. IMF (IF 1.9) Pub Date : 2023-03-31 K. Ranjithkumar, K. Geetha, V. Prabu, S. M. Senthilkumar, R. Sekar
ABSTRACT The present work is focused on the eco-friendly electrodeposition of nanocrystalline palladium on the copper substrate using an ammonia complex for the replacement of gold. The detailed study on the electrodeposition of palladium prepared from ammonia complex and solution characteristics such as current efficiency and thickness of the film growth per hour was evaluated using Faraday’s law
-
Surface modification of ABS polymer by electroless deposition of thin nickel film from a solution without reducing agent Trans. IMF (IF 1.9) Pub Date : 2023-03-31 V. Chakarova, M. Petrova, E. Dobreva, D. Lazarova, M. Monev
ABSTRACT For preparation of acrylonitrile–butadiene-styrene (ABS) polymer, suitable for electrodeposition of a subsequent metal coating, a modification of the activated polymer surface by electroless nickel deposition in an alkaline nickel citrate-based solution without reducing agent is proposed. The influence of the main components of the solution and the working conditions on the mass of the nickel
-
Tribological behaviour of HVOF-sprayed Ni-based self-lubricating composite coatings Trans. IMF (IF 1.9) Pub Date : 2023-03-31 Amit Kumar, Manoj Kumar, Satish Tailor
In the current investigation, the tribological behaviour of HVOF sprayed Ni-based self-lubricating composite coatings on cast iron substrate, which is a commonly used material for cylinders, was st...
-
Nickel-coated 3D-printed titanium electrodes for electrochemical flow reactors Trans. IMF (IF 1.9) Pub Date : 2023-03-30 L. F. Arenas, B. Miranda-Alcántara, N. Kaishubayeva, A. A. M. Abahussain, F. F. Rivera, C. Ponce de León, F. C. Walsh
ABSTRACT Electrocatalyst-coated metallic electrodes for electrochemical flow reactors have many applications in electrosynthesis, environmental remediation and energy conversion. This work presents novel nickel-coated titanium-alloy electrodes produced by means of direct metal laser sintering and constant current electrodeposition in an additive-free Wood’s nickel strike then a Watts nickel bath. Several
-
Dr JPG Farr FIMF (1931–2023) Trans. IMF (IF 1.9) Pub Date : 2023-03-10 Trevor Crichton
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 2, 2023)
-
CF Ipal – a case study of the chrome-free drop in replacement for IP1041 hexavalent chrome coating Trans. IMF (IF 1.9) Pub Date : 2023-03-07 Paul Holder
Published in Transactions of the IMF: The International Journal of Surface Engineering and Coatings (Vol. 101, No. 2, 2023)