样式: 排序: IF: - GO 导出 标记为已读
-
Shot peening of AZ31 magnesium alloy: role of surface microstructure and iron diffusion on corrosion behaviour Can. Metall. Q. (IF 0.9) Pub Date : 2024-04-17 K. Raghu Ram Mohan Reddy, Silaparasetti Srinivasa Rao, Manoj Kumar Elipey, B. Kiran Babu, Ratna Sunil Buradagunta
In the present work, surface grain refined AZ31 magnesium (Mg) alloy was produced by shot peening (SP). X-ray diffraction analysis demonstrated iron diffusion into the surface of AZ31 Mg alloy duri...
-
Effect of friction stir processing parameters on mechanical properties of Al8011/CeO2/SiC/RHA metal matrix composite Can. Metall. Q. (IF 0.9) Pub Date : 2024-04-16 Ziad Abdul Wahed, Faisal Hasan, Qasim Murtaza, Ali Nawaz, Abdul Faheem, Farhan Ahmad Shamim
In this research work, the FSP route opted to fabricate the metal matrix composite (MMC) on the surface of an aluminium 8011 alloy sheet by incorporating different volumetric compositions of silico...
-
Effect of beam current on microstructure, tensile properties and corrosion behaviour of electron beam welded zircaloy-4 joints Can. Metall. Q. (IF 0.9) Pub Date : 2024-04-12 Lord Jaykishan Nayak, Gour Gopal Roy
Butt joints of zircaloy-4 were made using electron beam (EB) welding. The effect of beam current (15–20 mA) on weld zone size, microstructure, porosity, mechanical and corrosion properties has been...
-
Sulfuric acid leaching of a complex zinc sulfide concentrate with high copper and lead concentrations under oxygen pressure Can. Metall. Q. (IF 0.9) Pub Date : 2024-04-12 Pu Sun, Xingbin Li, Chang Wei, Xingzheng Dai, Guomu Chen, Zhigan Deng, Jibo Wang, Fan Gang, Minting Li
This paper presents the use of an oxygen pressure-based acid leaching process for the selective extraction of basic metals from a complex zinc ore containing high concentrations of lead (6.00%) and...
-
The enrichment of low-grade antimony concentrate by matte smelting and the metallurgy of antimony matte Can. Metall. Q. (IF 0.9) Pub Date : 2024-04-08 Lixin Xia, Jia Yang, Hongyong Shi, Shunwei Pan, Shangjie Feng, Fei Wang, Bin Yang, Dachun Liu, Baoqiang Xu, Wenlong Jiang
This study employed the B2O3-Al2O3-CaO-SiO2 slag system, characterised by a low melting point, to conduct matte smelting for concentrating antimony in low-grade antimony concentrate. The process ef...
-
Investigation of the effect of ball-burnishing treatment applied to Al 7075-T6 alloy on mechanical and crystallographic properties Can. Metall. Q. (IF 0.9) Pub Date : 2024-04-08 Melika Özer, Büşra Ömürlü, Gözde Altuntaş, Onur Altuntaş
In this study, the mechanical, microstructural, and crystallographic effects of ball-burnishing applied to Al 7075-T6 alloy at 0.15–0.30 mm penetration depth, 0.15–0.30–0.60 mm/rev changing feed ra...
-
Evaluation of microstructure, corrosion resistance performance, and mechanical properties of 316L austenitic stainless steel FCAW welded joints: a comparative study Can. Metall. Q. (IF 0.9) Pub Date : 2024-04-06 Mohammad Ammar Mofid, Hadi Nasiri Vatan, Mohammad Reza Haj Kazemian
This research aims to not only examine the effect of different mixtures of Ar and CO2 on microstructural features and corrosion behavior of double-pass FCAW of 316L SS but also compare these charac...
-
Assessment of the impact of grinding conditions and water quality on the flotation of rare earth elements bearing minerals using hydroxamic acid Can. Metall. Q. (IF 0.9) Pub Date : 2024-04-05 M. Mobaraki Moghaddam, J.-F. Boulanger, L. Coudert, S. Somot, D. Smith
Froth flotation is commonly used for the separation of rare earth minerals (REMs). A better understanding of flotation is of interest for REMs and non-sulfide minerals that carry other elements suc...
-
The effect of conditioning pH behaviour on spodumene flotation with fatty acids Can. Metall. Q. (IF 0.9) Pub Date : 2024-03-30 Brian Kawenski Cook, Massoud Aghamirian, Tassos Grammatikopoulos, Charlotte E. Gibson
Spodumene - the primary lithium mineral - is often concentrated by flotation with fatty acid collectors. However, producing high-grade concentrates at high recoveries is challenging and a risk for ...
-
Effect of cooling rate on microstructure, mechanical and wear properties of Mg-2Zn and Mg-2Zn-1Mn alloys Can. Metall. Q. (IF 0.9) Pub Date : 2024-03-27 Levent Elen, Nurhan Çevik Elen
In this study, the wear characteristics of Mg-2Zn and Mg2Zn-1Mn alloys in both dry and corrosive conditions, as well as their mechanical properties dependent on cooling rate, were examined. It has ...
-
Non-Equilibrium structural factors in experimental U–Pd phase diagram determinations and thermodynamic evaluations Can. Metall. Q. (IF 0.9) Pub Date : 2024-03-25 L. Wang, M.H. Kaye
One of the basic assumptions of a phase diagram is that each point on a phase boundary line in theory is in equilibrium between the adjacent phases. In practice there are deviations of experimental...
-
Observation on reversibility of flocculation in fine quartz suspensions Can. Metall. Q. (IF 0.9) Pub Date : 2024-03-22 H. Alizadeh, M. Pawlik
A series of flocculation and ultrasonication tests were performed on dilute fine quartz suspensions flocculated with the use of three polyacrylamide-based flocculants of similar molecular weights b...
-
Chrysophyllum Albidum extract as a new and green protective agent for metal Can. Metall. Q. (IF 0.9) Pub Date : 2024-03-15 I. Okeke Pamela, C. Neon Emmanuel, Hamza Ichou, Elyor Berdimurodov, Omar Dagdag, O. Amanze Kenneth, C. Dandu Blessing, Nizamuddin Aliev, Avni Berisha, Abeer A. AlObaid
Gravimetric measurements and potentiodynamic polarization techniques were employed to investigate the protective performance of the metal in 1 M HCl and 0.5 M H2SO4 solutions by the C. albidum leaf...
-
Evaluation of anti-corrosion potential of Datura Metel plant extract on mild steel upon sulphuric acid exposure Can. Metall. Q. (IF 0.9) Pub Date : 2024-02-02 Sugumar Mohanasundaram, Sethuraj Geetha, R. Nagajothi, Venkatesa Prabhu Sundramurthy, Jethose Vijayakumar, Naiyf S. Alharbi, Muthu Thiruvengadam
The present study was aimed to investigate the Datura metel plant extract’s anti-corrosion ability on mild steel against sulphuric acid. A comprehensive set of experiments using conventional method...
-
Valorisation of iron ore tailing piles: utilisation of element-to-mineral conversion and association index to building mineralogical modal Can. Metall. Q. (IF 0.9) Pub Date : 2024-02-01 Fatemeh Kazemi, Ali Akbar Abdollahzadeh
The objective of this study is to employ the Element-to-Mineral Conversion (EMC) method for determining the mineralogical modal distributions of tailings from iron ore processing plants. Initially,...
-
Microstructure and properties of aluminium matrix hybrid nanocomposite Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-31 Sougata Barik, Subrata Mondal
Aluminium metal matrix nanocomposites (MMNCs) reinforced with particulate have been in the limelight recently due to their improved tribological and mechanical properties such as stiffness, strengt...
-
Kinetics of sphalerite dissolution for potential zinc recovery via oxidative leaching Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-31 Ikechukwu A. Nnanwube, Okechukwu D. Onukwuli, Chinyere B. Ezekannagha
In this study, the leaching of zinc from sphalerite in nitric acid (HNO3)/hydrogen peroxide (H2O2) binary solution was examined via kinetic study. The result showed that the amount of zinc leached ...
-
An integration of RSM and ANN modelling approach for prediction of FSW joint properties in AA7178/AA5456 alloys Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-31 S. Jeyakrishnan, S. Vijayakumar, M. Naga Swapna Sri, P. Anusha
The selection of optimal process parameters in Friction stir welding is vital for achieving high-quality welds. This study utilises Response Surface Methodology (RSM) to statistically analyze the i...
-
A review on existing pre-treatment techniques of waste printed circuit boards Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-31 Rohit Jha, Munmun Agrawal, Arundhati Jena, Gautam Mishra, Himanshu Ranjan Verma, Arunabh Meshram, Kamalesh K. Singh
This review emphasises the pre-treatment of waste printed circuit boards (WPCBs). Different types of pre-treatment, like physical, mechanical, chemical, and thermal processes have been discussed fo...
-
The employing of pure calcium sulfate extracted from phosphogypsum for composing highly pure ammonium sulfate and calcium carbonate Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-31 Adel S. Orabi, Ahmed H. Ismail, Kholoud M. Abou El-Nour, Bahig M. Atia, Mohamed A. Gado, Mohamed F. Cheira, Adel E.-S. Goda
The phosphoric acid wet process waste stream provided the phosphogypsum (PG). Phosphogypsum waste is environmentally harmful and economically valuable. However, processing phosphogypsum to produce ...
-
Mechanical properties and corrosion behaviour of dissimilar friction stir-welded Al 7075 and Mg AZ31 alloys with Cd and Zn interlayer Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-29 Satya Kumar Dewangan, M. K. Tripathi, P. N. Banjare, A. Bhowmik, M. K. Manoj
The objective of present research work is to study joint strength and corrosion behaviour of dissimilar Friction Stir Welding (FSW) of Al 7075 and Mg AZ31 alloys with Cd and Zn interlayer. The FSW ...
-
Effect of hydroxyapatite concentration and electrophoretic deposition (EPD) parameter process on hydroxyapatite/chitosan coating quality for porous titanium as orthopedic implant Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-30 Dhyah Annur, Labibah Nur Hasanah, Ika Kartika, Sugeng Supriadi, Bambang Suharno
For orthopedic biomaterials, titanium and its alloys have shown great potential. Despite its benefits, the development of titanium for orthopedic implants is continuously growing. In order to reduc...
-
Inhibitory effects of 1-butylpyridin-1-ium bromide in 0.1 M sulphamic acid for mild steel Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-29 Smitha Shree S, Srilatha Rao, A.S. Sowmyashree, G.K. Prashanth, Vidhyashree Kumbla, T. Aravinda
In recent years, there has been a consistent development in the introduction of novel corrosion inhibitors due to their potential to reduce the dissolution of metal surfaces under various corrosive...
-
Developing micro-lamellar composites of magnesium-calcium deficient nanohydroxyapatite by powder metallurgy route: in vitro degradation studies Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-24 B. Kiran Babu, K. Raghu Ram Mohan Reddy, A. Balaraju, Kanumuri Singaiah, G. V. N. B. Prabhakar
In the present work, magnesium-calcium deficient nano hydroxyapatite (Mg-CDHA) lamellar composites with 5, 10 and 15 wt. % CDHA of crystallite size 32 nm were produced by ball milling and sintering...
-
Numerical simulation of the bentonite-bonded sand mould compaction process using micro-mechanical parameter relationships Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-24 Dheya Abdulamer
Commercial software packages for FEM analysis have been used to numerically simulate the behaviour of the complex systems of bentonite-bonded sand mould under pressure and subjected to stress distr...
-
Microstructure, mechanical, electrical and wear properties of friction stir back extruded copper-6 vol.%Ti2SnC composite material Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-23 Amirhossein Jahani, Hamed Jamshidi Aval, Mohammad Rajabi, Roohollah Jamaati
This study investigates the impact of extrusion speed on the microstructure, mechanical and electrical properties, and wear resistance of friction stir back extruded Cu-6 vol.% Ti2SnC composite. Th...
-
Evaluating the corrosion behavior of 6061 Al-10(vol.%) SiC(P) composite in varied HCl concentration using ionic liquid: electrochemical and surface studies Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-22 Namitha Kedimar, Padmalatha Rao, Suma A. Rao
The corrosion behaviour of 6061 Al-10(vol.%) SiC(P) composite in hydrochloric acid (HCl) was studied. Studies were done in 0.01 and 0.025 M HCl using 1-methyl-1-propyl piperidinium bromide (MPPB) a...
-
Recovery of nickel and iron from ferronickel powder and high nickel matte via the atmospheric leaching-hematite precipitation process Can. Metall. Q. (IF 0.9) Pub Date : 2024-01-19 Xiaohua Peng, Xin Jin, Yong Zhen, Bo Yang, Chang Wei, Xingbin Li, Zhigan Deng, Minting Li
This study introduces a novel synergistic leaching process for ferronickel powder and high nickel matte, enabling the atmospheric leaching and the hematite precipitation process to mitigate carbon ...
-
Comparative evaluation of freeze-dried and hot air-dried Spirulina Platensis extracts as green inhibitors for mild steel corrosion Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-29 R. Seghiri, M. Rbaa, Z. Rouifi, A. Moussaif, E. Berdimurodov, M. Demir, N. Aliev, J. Legrand
Spirulina, a commercially farmed cyanobacteria, offers potential as a nontoxic corrosion inhibitor. However, traditional drying methods deteriorate its protective feature and this challenge must be...
-
Fe–Ni–Cr alloy matrix composite reinforced by superhard in-situ TiB2 produced through casting Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-29 S. Zameer Abbas
Fe–7.2Ni–16.2Cr–7Ti–3B (wt-%) composition was melted and cast into strips producing an in-situ TiB2 reinforcement within a stainless-steel matrix. The composite was characterised for microstructure...
-
Surface modification of fully austenitic stainless steel SMO 254 by laser shock peening to induce compressive residual stress Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-29 R. Pilakkandi
The laser shock peening process was conducted with varying pulse densities on the SMO 254 material. The formation of an α martensitic layer from the austenitic structure was witnessed after conduct...
-
The effect of friction stir-back extrusion speed on Al-Cu-Mg-Li alloy microstructure and corrosion behaviour Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-21 Marjan Rezaei, Hamed Jamshidi Aval
In this study, the effect of extrusion speed on the microstructure and corrosion behaviour of a friction stir-back extruded Al-Cu-Mg alloy containing 0.5 wt.% Li was investigated. Results show that...
-
Investigation for the optimum selection of hybrid AA2024 – ceramic particulate alloy composite materials prepared through stir casting using the hybrid AHP-TOPSIS MCDM technique Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-21 Sourabh Bhaskar, Mukesh Kumar, Amar Patnaik
In most of the manufacturing industries, the selection of optimal material among the finite available alternatives becomes more difficult with the more required performance criteria to satisfy cert...
-
Electrochemical deposition and characterisation of NiTi alloy coatings for better corrosion protection Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-20 Harshini Sai G., A. Chitharanjan Hegde
The present study reports the electrochemical deposition and characterisation of Nickel-Titanium (NiTi) alloy coatings on mild steel (MS) from citrate bath having nickel sulphate and titanium oxysu...
-
Comparative study of anodizing and chromate conversion coatings in enhancing the wear and corrosion properties of 6063 Al alloy Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-20 Soroush Asgharian, Reza Khadem, Maryam Molaei, Meisam Nouri, Hassan Elmkhah
The present study compares the corrosion and tribological performance of anodic oxide (AO) and chromate conversion (CC) coatings deposited on 6063-T6 aluminum alloy. The goal is to determine how th...
-
Correction Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-18
Published in Canadian Metallurgical Quarterly: The Canadian Journal of Metallurgy and Materials Science (Ahead of Print, 2023)
-
Influence of ultrafine surface grain size on the passive film chemistry and critical pitting temperature (CPT) in AISI 316L austenitic stainless steel Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-18 Sadegh Pour-Ali, Reza Tavangar, Seyedsina Hejazi
Severe shot peening (SSP) was applied to induce a profound surface deformation characterised by the formation of ultrafine-grained structures with an average grain size of 99 ± 5 nm on AISI 316L. T...
-
Mechanical properties and work hardening behaviour of spring steel after the quenching-partitioning process Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-12 Aliakbar Abedini, Habibollah Rastegari, SayyedMohammad Emam
Recently, to create high-strength steels with suitable ductility, quenching and partitioning (Q&P) heat treatment was employed to form a micro-composite microstructure. In the current study, the in...
-
Enhanced strength ductility and wear resistance in a friction stir processing engineered AZ31B/TiC magnesium-based nanocomposites Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-08 Prem Sagar, Amit Handa
In the present investigation, efforts have been made to fabricate a magnesium-based AZ31B nanocomposite by integrating nano-sized titanium carbide (TiC) particles via utilising the friction stir pr...
-
Crystallisation kinetics of iron (oxyhydr)oxides from zinc leaching solution at 95–15°C based on the Avrami equation Can. Metall. Q. (IF 0.9) Pub Date : 2023-12-07 Xiaohua Peng, Chang Wei, Xingbin Li, Bo Yang, Zhigan Deng, Minting Li, Gang Fan
Here, the Avrami equation was employed to investigate the crystallisation process of iron (oxyhydr)oxides from the ZnSO4–FeSO4 solution. Hydrothermal conditions were as follows: initial Fe2+ concen...
-
The role of heat treatment on the in vitro degradation and corrosion-initiated failure of the biodegradable Mg–Zn–RE alloy Can. Metall. Q. (IF 0.9) Pub Date : 2023-11-29 B. Venkateswarlu, B. Ratna Sunil, R. Sunil Kumar
In the current work, magnesium (Mg) alloy containing zinc (4%) and rare earth (RE) elements (1%) was produced by stir casting and the role of heat treatment on altering the microstructure, in vitro...
-
Study on the impact of moulding parameters on the flow property of green sand mould Can. Metall. Q. (IF 0.9) Pub Date : 2023-11-29 Dheya Abdulamer
The efficiency of green sand mould determines the process performance of sand casting. It is important to have a high flowability level of the green sand to ensure a well-distributed green sand mou...
-
The effect of quenching/double quenching and tempering heat treatment cycles on the microstructure, impact energy and hardness of AISI H13 tool steel Can. Metall. Q. (IF 0.9) Pub Date : 2023-11-22 Alpay Ozer, Melika Ozer, Çagatay Atak, Gozde Altuntas
In this study, microstructure modifications of AISI H13 steel were studied with different heat treatments such as conventional quenching, quenching + tempering/double tempering and double quenching...
-
Iron, copper, and rare earth minerals beneficiation in an IOCG type deposit Can. Metall. Q. (IF 0.9) Pub Date : 2023-11-22 Mohammad Javad Nekoee Motlagh, Faraz Soltani, Saeed Mojeddifar
The sample of the Sineqan mine (Arak, Iran), containing 16.5% Fe, 0.13% Cu, 475 ppm Ce, 446 ppm La, and 134 ppm Nd, was characterised and processed to investigate the possibility of separating iron...
-
The effect of post heat treatment and TiO2 addition on tribological and electrochemical performances of thermally sprayed alumina Can. Metall. Q. (IF 0.9) Pub Date : 2023-11-10 Bouklouche Issam, Younes Rassim, Idir Abdelhek, Bradai Mohand Amokrane, Saoula Nadia, Dalibon Eugenia
The heat treatment of alumina ceramics is a fundamental process for controlling the physical, mechanical and thermal properties of these components during industrial operations. The problem stateme...
-
Failure analysis of punches and investigation notch impact strength of tool steel cryogenic treated with tempering used in hot forging Can. Metall. Q. (IF 0.9) Pub Date : 2023-11-07 Gokhan Atay, Hakan Coşkun, Yusuf Kaynak
Plumbing systems, valves, fittings, condensers, pipes, and other hot-forming components are produced using hot forging, a type of plastic deformation. This method may result in equipment damage due...
-
Aqueous oxidation of galena by hydrogen peroxide in hydrochloric acid Can. Metall. Q. (IF 0.9) Pub Date : 2023-11-02 Cristina E. Cârstea, Ana-Maria Sandu, Mădălina I. Duinea, Irina Dăbuleanu, Paul Chiriță
The aqueous oxidation of galena by hydrogen peroxide (H2O2) at an initial pH 2.0 and at a temperature of 30 °C was studied using potentiodynamic polarisation, Electrochemical impedance spectroscopy...
-
Effects of Fe2O3 contents on molten slag viscosity behaviour Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-31 Lei He, Jiahao Liu, Tu Hu, Tingting Lv, Li Gao
The critical factor for smooth slag discharge has been found to be the viscosity characteristics of the molten slag. Molten slag cannot reach the condition for slag trapping owing to its high Fe2O3...
-
Adsorption and corrosion inhibition behaviour of Pterocarpus marsupium stem extract on mild steel in acid medium: experimental and statistical approach Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-30 M. Lavanya, Aishwarya S. Suvarna, Preethi P. Kumari
The undertaken work shows the efficacy of Pterocarpus marsupium stem extract (PMSE) as an eco-friendly green inhibitor to mitigate the deterioration of mild steel (MS) in various concentrations of ...
-
Influence of chloride ions on corrosion behaviour of zinc-alloy in the simulated body fluid solution Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-27 Deepti Jain, Sumanta Pradhan, Sudharma Kumari Singh, Rahul Shrivastava, Debasis Behera
The bio-corrosion behaviours of the Zn alloy in the simulated body fluid (SBF) at different chloride ion concentrations were investigated. The Potentiodynamic Polarisation Curve (PDP) and Electroch...
-
Comparison between Schiff-base and its iron complex as steel corrosion inhibitors used by the petroleum industry in marine environments Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-16 Reda S. Abdel-Hameed, O. E. El-Azabawy, A. A. El-Segaey, E. A. Khamis, N. S. Abdelshafi, H. I. Al-Shafey
The Schiff-base N,N-bis(2-furaldehyde)−1,3-diaminopropane (FDP) and its complex with iron (FDPIC) were prepared and used as corrosion inhibitors for mild-steel (MS) in a 3.5% NaCl medium as an arti...
-
Determination of the solubility of MgSO4 in the Zinc hydrometallurgy system within the temperature range of 263.15 K–293.15 K Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-19 Xin Jin, Xingbin Li, Yong Zhen, Xingguo Luo, Chang Wei, Zhigan Deng, Minting Li
Solid–liquid equilibrium solubility of magnesium sulphate (MgSO4) is essential for designing and optimising the removal and recovery of magnesium (Mg) from standard zinc (Zn) hydrometallurgy system...
-
Statistical modelling and kinetics of copper loss to printed circuit board (PCB) fibreglass during PCB ammine leaching Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-17 O. O. Oluokun, I. O. Otunniyi
PCB dust leach feed contains fibreglass particles responsible for incomplete copper recovery observed during PCB dust leaching. Interaction of fibreglass particles with ammine leach solution was st...
-
Effect of adhesive on friction stir spot welding of AZ31B magnesium alloy sheets Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-10 Anil Imak, Omer Ekinci
AZ31B magnesium alloy sheets were lap-joined with adhesive only, friction stir spot welding (FSSW) only, and also with FSSW after adding adhesive between sheets. The produced joints were comparativ...
-
Effect of Mg stoichiometry on self-propagating high temperature synthesis (SHS) of ZrC nanoparticles in ZrO2-Mg-C system Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-09 Mehmet Bugdayci, Ozan Coban, Serkan Baslayici
It is significant to develop the production processes of Zirconium Carbide (ZrC) nanoparticles due to its superior properties. In this study, self-propagating high-temperature synthesis (SHS) follo...
-
Thermodynamic assessment of tin-smelting from cassiterite concentrates Can. Metall. Q. (IF 0.9) Pub Date : 2023-10-09 Elmira Moosavi-Khoonsari, Sina Mostaghel
Tin is a critical and rare metal produced via carbothermic reduction smelting of upgraded concentrates in two steps, primary and secondary reduction. There is limited literature available on cassit...
-
Leaching kinetics of tungsten in scheelite tailings in sodium carbonate solutions at low temperatures (25–75°C) Can. Metall. Q. (IF 0.9) Pub Date : 2023-09-27 Terry C. Cheng, Ceferino Soriano, Heather Jamieson, Hendrik Falck
The leaching kinetics of tungsten in scheelite tailings in sodium carbonate solutions at low temperatures (25–75°C) were found to closely follow the predicted values based on the shrinking core mod...
-
AlxCoCrFeNi (0.5 < x < 3) high-entropy alloys: from cost-effective synthesis to strengthening via thermomechanical processing Can. Metall. Q. (IF 0.9) Pub Date : 2023-09-29 Faruk Kaya, Sajjad Aliakbarlu, Özgür Duygulu, G. İpek Selimoğlu, Bora Derin
In this study, the cost-effective synthesis, shaping and strengthening through hot and cold rolling of AlxCoCrFeNi (0.5 < x < 3) high-entropy alloys was investigated using an integrated processing ...
-
Effect of compaction and fluoride content on the remelting efficiency of pure magnesium chips Can. Metall. Q. (IF 0.9) Pub Date : 2023-09-29 Pınar Yörük, Mertol Gökelma, Bora Derin
Magnesium is widely used in industries, such as automotive, aerospace, and medical fields. The demand on magnesium has been growing, although the production and melt treatment is complex due to str...
-
Efficient extraction of tungsten from isopolytungstate using anion exchange resin Can. Metall. Q. (IF 0.9) Pub Date : 2023-09-21 Hongli Zhou, Wei Dong, Sili Ren, Yong Zhang, Hanlin Qian, Aishun Ma, Liang Yang, Wuhui Luo, Dandan Gong
Isopolytungstate is considered an important intermediate product in scheelite metallurgy. However, extracting tungsten from the isopolytungstate solution and producing the conventional commodity am...