-
Increase in Process Mode Stability by Determining Hot Areas of Steel Ladle Steel Transl. Pub Date : 2024-03-21 S. S. Belonozhko, D. V. Dmitriev, I. S. Murzin, V. V. Emelyanov, A. A. Meshcheryachenko
-
Development of an Automatic Anode Production Line Steel Transl. Pub Date : 2024-03-21 K. V. Litsin, D. V. Belykh
-
Study of Anticorrosive Action of Alkylphosphonic Acid Solutions in Monoethanolamine Based on the Formation of Chelate Complexes With Iron Ions Steel Transl. Pub Date : 2024-03-21 V. S. Zimovets, I. N. Kravchenko, N. V. Danyakin, S. N. Solovykh, N. N. Bogdashev, M. A. Smagin
-
Porosity of Iron-Ore Pellets at Different Stages of Roasting and Reduction Steel Transl. Pub Date : 2024-03-21 I. S. Bersenev, I. S. Vokhmyakova, N. K. Ozornin, S. I. Pokolenko, E. R. Sabirov, N. A. Spirin
-
Inhibitors: Classification and Mechanism of Corrosion Protection (Literature Review) Steel Transl. Pub Date : 2024-03-21 I. S. Makushchenko, D. N. Smirnov, I. A. Kozlov
-
Research of the Annealing Process of Capillary Tubes for the Manufacture of Medical Syringes Steel Transl. Pub Date : 2024-03-21 B. P. Yurev, V. A. Dudko
-
Simulations of the Drawing Process in a System of Pressure Dies and Work Dies Steel Transl. Pub Date : 2024-03-21 S. A. Kuznetsov
-
Features of Texture Formation of High-Carbon Steel Wire after Combined Deformation Treatment Steel Transl. Pub Date : 2024-03-21 M. A. Polyakova, K. G. Pivovarova, A. E. Gulin
-
Influence of Phase Composition and Aging on Hydrogen Brittleness of High-Pressure Pipelines Steel Transl. Pub Date : 2024-03-21 S. V. Kuberskii, S. A. Sbitnev, R. E. Velikotskii, V. V. Dolzhkov
-
Reduction of Active Resistance in the Bath of a Ferroalloy Electric Furnace and Energy-Technological Parameters of Smelting Steel Transl. Pub Date : 2024-03-21 A. P. Shkirmontov
-
Testing Variants of Plasma Hardfacing of Bronze on Grade 38H2N2MA Steel Steel Transl. Pub Date : 2024-02-29 S. D. Neulybin
-
Rust Modifier Primers—Recognized Means of Corrosion Protection Steel Transl. Pub Date : 2024-02-29 V. A. Voitovich, I. N. Khryapchenkova
Abstract The main characteristics of the new primer, which allows transforming rust, are presented, its advantages and disadvantages are considered, and the main areas of application are given. The primer is made on the basis of plasticized polyvinyl acetate dispersion, ethyl silicate, surfactants and phosphoric acid salts. The technology of its application is described.
-
Performance Features of Submerged Entry Nozzle in High-Speed Casting on Thin-Slab CC Machine Steel Transl. Pub Date : 2024-02-29 E. N. Maksaev, M. I. Elovenkov, A. V. Kosonogov, V. V. Kislitsa, A. A. Korostelev
-
Comparative Analysis of Parameters of Symmetrical and Asymmetrical Cold Strip Rolling Based on Computer Simulation Steel Transl. Pub Date : 2024-02-29 A. V. Kozhevnikov, M. M. Skripalenko, I. A. Kozhevnikova, M. N. Skripalenko, B. A. Romantsev, V. S. Yusupov, A. A. Sidorov, S. V. Zhilenko, A. V. Samoilov
-
Analysis of Thermal Processes in Steels during Laser Heating Steel Transl. Pub Date : 2024-02-29 N. A. Chichenev, S. M. Gorbatyuk, V. A. Nagovitsyn, O. N. Chicheneva
-
Study of the Influence of Surface Treatment with a Flexible Tool on the Cyclic Durability Resistance of Steel Grade 25 Steel Transl. Pub Date : 2024-02-29 M. P. Baryshnikov, A. S. Ishimov, E. V. Lopatina, L. V. Nosov, I. E. Znikin
-
Influence of Various Kinds of Ultrasonic Treatment on Surface Geometry Steel Transl. Pub Date : 2024-02-29 R. I. Nigmetzyanov, S. K. Sundukov, A. V. Sukhov, V. M. Prikhodko, D. S. Fatyukhin
-
Development of the Mathematical Model of Continuous Pipe Rolling and Study of the Influence of Technological Factors on the Formation of Surface Defects Steel Transl. Pub Date : 2024-02-29 V. A. Toporov, P. A. Ibragimov, O. A. Panasenko, D. Sh. Nukhov, A. O. Khalezov
-
Modern Methods Analysis of Longitudinally Welded Pipes Production in the Continuous Forming Mill TESA10-50 (Pipe Electrical Welding Unit) of the Different Types of Configurations Steel Transl. Pub Date : 2024-02-29 S. V. Samusev, T. Y. Sidorova, V. T. Nguyen
-
Determination of Optimal Parameters of Hot Die Forging of Piercing Mill Mandrel by Modeling in QForm Suite Steel Transl. Pub Date : 2024-02-29 A. A. Myshechkin, V. S. Yusupov, S. V. Skripnik
-
Features of the Distribution of Nonmetallic Inclusions in Continuously Cast Billets Made of Sulfur-Containing Steel C45E Steel Transl. Pub Date : 2024-02-29 D. V. Rutskii, N. A. Zyuban, M. V. Kirilichev, M. S. Nikitin, M. Yu. Chubukov
-
Increasing Converter Productivity by Optimizing Equipment Repair Times Steel Transl. Pub Date : 2024-02-29 A. A. Lapinsky, A. A. Metelkin, O. I. Shevchenko
-
Concerning the Profiling of Electrowelded Steel Pipes with a Triangular Cross Section Steel Transl. Pub Date : 2024-02-29 K. E. Akopyan, V. S. Yusupov, E. D. Koryakovskii, I. L. Kontievskii, N. L. Bolobanova
-
Methodology of Intensive Energy Saving in Ferrous Metallurgy. Experience and Results of Use Steel Transl. Pub Date : 2024-02-29 S. V. Kartavtsev, E. G. Neshporenko, S. V. Matveev
Abstract Intensive energy saving and technological progress are very relevant for such an area as ferrous metallurgy. Based on many years of research and a systematic approach, the paper summarizes and further develops the provisions of the intensive energy saving methodology for technological stages of metallurgical factories. The experience of applying the methodology of intensive energy saving (MIES)
-
Study of Wear Resistance of Mandrels upon Piercing Workpieces Made of Steel 20Kh13 Steel Transl. Pub Date : 2024-02-29 A. A. Korsakov, D. V. Mikhalkin, A. V. Krasikov, A. S. Aleschenko, Yu. V. Gamin, A. I. Bannikov, Ya. A. Chemaeva, E. Yu. Mikhalkina
-
Finite-Element Analysis of Stress-Strain State of Steel Reinforcement in Stretching–Bending–Rebending (Cold Stretching) Steel Transl. Pub Date : 2024-02-29 D. V. Konstantinov, A. G. Korchunov, E. M. Ogneva, A. Yu. Stolyarov, M. V. Zaytseva
-
-
Simulation of the Deformation Zone and Stress-Strain State during Screw Rolling of Billets from Hard-Deformed Alloy Steel Transl. Pub Date : 2024-02-13 M. M. Skripalenko, B. A. Romantsev, V. S. Yusupov, V. A. Andreev, S. O. Rogachev, A. A. Gartvig, Yu. A. Gladkov, M. P. Kuprikov
-
Development of a Mechatronic System for the Main Drive of a Cold Pipe Rolling Mill Steel Transl. Pub Date : 2024-02-13 K. V. Litsin, A. A. Klimenko, R. N. Kalinin, I. A. Orekhovskii, D. R. Azibaeva
-
Experimental Temperature Dependencies in Force Plunge-Cut Grinding Steel Transl. Pub Date : 2024-02-13 V. V. Bykov, M. I. Golubev, M. S. Belyakov, E. P. Baranov
-
The Influence of Cadmium Plating of 60S2A Steel in Cyanide-Free Electrolytes on Its Strength Characteristics and Some Properties of Cadmium Coatings Steel Transl. Pub Date : 2024-02-13 K. N. Smirnov, E. A. Arkhipov, T. A. Vagramyan, D. A. Zhirukhin, D. A. Shuvalov, I. V. Odinokova
Abstract The influence of the cadmium plating process from various types of electrolytes and the corrosion resistance of cadmium coatings on the strength characteristics of 60S2A steel were investigated. The research results showed that, contrary to the established opinion that the ammonium chloride electrolyte of cadmium plating has a minimal tendency to hydrogenation, it is practically absent in
-
Properties and Structure Control of Hot-Worked Vessels by Varying the Cooling Media at the Outlet of the Rolling-Press Line Steel Transl. Pub Date : 2024-02-13 V. A. Medvedev, R. L. Shatalov
-
Effect of Silicon on the Heat Resistance of Deposited Alloys of the Ti–Al System Steel Transl. Pub Date : 2024-02-13 A. I. Kovtunov, A. G. Bochkarev, D. I. Plakhotnyi
-
Effect of Severe Plastic Deformation on the Formation of the Nonferrous Metal Alloy Microstructure Steel Transl. Pub Date : 2024-02-13 A. S. Borisov, A. A. Naumov, A. Yu. Borisova, O. G. Zotov, V. N. Tsemenko
-
Study of the Elemental Composition and Wear Resistance of Coatings Obtained by Plasma Electrolytic Oxidation Steel Transl. Pub Date : 2024-02-13 Yu. A. Kuznetsov, I. N. Kravchenko, D. I. Petrovskii
-
Influence of Heat Treatment on the Structure, Phase Composition and Properties of Deformable Hard-Magnetic Fe–30Cr–20Co–2Mo Powder Alloy Steel Transl. Pub Date : 2024-02-13 A. B. Ankudinov, A. Yu. Ivannikov, V. A. Zelenskii, A. B. Mikhailova, M. A. Kaplan, V. S. Yusupov
-
Effect of Cryogenic Processing on the Microstructure and Properties of High-Strength Steel D6AC Steel Transl. Pub Date : 2024-02-13 M. V. Maisuradze, M. A. Ryzhkov, A. A. Kuklina, V. V. Nazarova, E. V. Antakov
-
On Joint Deoxidation and Refining of Steel with Complex Alloys Steel Transl. Pub Date : 2024-02-13 I. V. Bakin, I. V. Ryabchikov, V. G. Mizin, A. O. Romashko, R. G. Usmanov
Abstract Based on the results of theoretical and laboratory studies of structural steel ladle processing with multicomponent aluminum-containing modifiers with alkaline earth metals (AEMs), the thermodynamic and technological advantages of using Ca–Al and Ba–Al complexes instead of standard technology (deoxidation with aluminum and modification with silicocalcium) have been identified. The use of a
-
Use of New Materials in the Manufacture of Containers to Store Anti-Icing Fluid at Civil Aviation Airfields Steel Transl. Pub Date : 2023-11-29 N. K. Tagieva, A. V. Fomin, A. A. Babchenko
-
Service Life Prediction and Evaluation of the Technical Condition of Engines Based on Remote Diagnostic System Steel Transl. Pub Date : 2023-11-29 A. A. Pegachkov
-
Analysis of Accuracy of Diagnostic Model of Hydraulic Cylinders of Transport and Technological Machines Steel Transl. Pub Date : 2023-11-29 V. A. Zorin, Nguyen Chong Min, Ta Ngok Thang, Yu. G. Val’ko
-
-
Application of Anti-Corrosion Coatings to Protect the Elements Suspension and Load-Bearing Structures Machines (Patent Review) Steel Transl. Pub Date : 2023-12-01
Abstract This article discusses various types of protective anti-corrosion coatings for machine parts and load-bearing structures that exist today. A comparative analysis of coatings based on polymeric materials is given.
-
General Mechanism of Biological Degradation of Polymeric Materials (Review) Steel Transl. Pub Date : 2023-12-01
Abstract The article provides an overview of modern ideas about biodegradation and biodeterioration and of polymer materials. The mechanisms of bacteria sedimentation and attachment and the formation of biofilms are described. Schemes of influencing abiotic and biological environmental factors are considered: the impact of polysaccharides and proteins contained in biofilms on a polymer material, implementation
-
Improvement of Electrical Isotropic Low-Carbon Converter Steelmaking. Part 3 Steel Transl. Pub Date : 2023-12-01
Abstract The issues of obtaining low carbon content (less than 0.003%) in finished electrical isotropic steel (EIS) of alloy group 4 (Si >2.9% and Al >1.0%) under converter production conditions are considered. The analysis of the impact of possible technological factors on the carbon gain in the metal after decarbonization is presented. Testing of technological methods, parameters and materials confirm
-
Research and Improvement of Fused Deposition Modeling of Nylon 12 Products Steel Transl. Pub Date : 2023-11-29 A. A. Myshechkin, A. A. Lim
-
Directions for Reducing Chemical Heterogeneity of Continually Cast Pipe Blank Steel Transl. Pub Date : 2023-11-29 S. P. Burmasov, A. G. Gudov, E. G. Zhitlukhin, I. P. Parkhomenko, N. S. Stolbov
-
Comparison of Plasma Surface Hardening with Vibratory Arc Deposition Steel Transl. Pub Date : 2023-11-29 I. A. Nagaiko, A. A. Gulyarenko
-
Influence of Unit Concentrate Surface on Prime Yield at Green Pellet Pelletizing Steel Transl. Pub Date : 2023-11-29 A. S. Timofeeva, T. V. Nikitchenko, S. N. Romashin, A. V. Kononykhin, Yu. V. Smirnova, V. V. Fedina
-
Increasing the Wear Resistance of Sliding Bearings by Using Magnetic Fluid Steel Transl. Pub Date : 2023-11-29 S. P. Shets, A. O. Gorlenko, A. V. Kolomeichenko, D. A. Boldyrev
-
Estimating the Efficiency of a Hammer Mill with Combined Methods for Suspending Hammers by a Rotor Steel Transl. Pub Date : 2023-11-29 D. A. Vlasenko
-
Determination of Wear Resistance of Epoxy-Sand Composites Used in Machine Repairs Steel Transl. Pub Date : 2023-11-29 T. N. Egunova
-
Determination of the Optimal Design of a Wastewater Treatment Plant after Waterjet Cutting Steel Transl. Pub Date : 2023-11-29 A. A. Baurov
-
Study of Thermal Conductivity of Materials Based on Silicon Carbide and Silicon Nitride Steel Transl. Pub Date : 2023-11-29 S. N. Perevislov, M. A. Markov, Yu. A. Kuznetsov, I. N. Kravchenko, A. V. Krasikov
-
Effect of Chromium Carbide on the Structure and Properties of Weld-Deposited Metal Introduced into the Charge Mixture of a Flux-Cored Wire Steel Transl. Pub Date : 2023-11-29 N. V. Kobernik, A. S. Pankratov, S. S. Sorokin, V. V. Petrova, A. L. Galinovskii, A. G. Orlik, D. V. Stroitelev
-
Polymorphism of Iron. Part 2. Paradoxes of Metallic Bonding Models Steel Transl. Pub Date : 2023-11-29 S. V. Davydov
-
Operation of Reconditioned Rolls of Sheet Cold Rolling Mills Steel Transl. Pub Date : 2023-11-29 P. B. Sokolov, A. V. Muravieva
Abstract Based on original technical solutions, Uralmashplant PJSC restored decommissioned backup cold rolls for the 1300 mill of VIZ-Stal LLC and 1400 mill of NLMK PJSC, which ensured high performance characteristics subsequently. Under the shortage of cast rolls, restoring their performance with an innovative banding technique serves as a significant reserve for increasing the efficiency of rolling
-
Laser Processing of Wear-Resistant Iron Based Electrochemical Composites Steel Transl. Pub Date : 2023-11-29 Yu. E. Kisel, A. O. Gorlenko, A. V. Kolomeichenko, D. A. Boldyrev
-
Step Bending of Sheet Metal in the Manufacture of Thin-Walled Body Parts Steel Transl. Pub Date : 2023-11-29 A. O. Karfidov, N. A. Chichenev, M. V. Vasil’ev, O. N. Chicheneva
-
Determination of Deformation Resistance during Rolling Steel Transl. Pub Date : 2023-11-01
Abstract The joint influence of degree and strain rate for copper and low-carbon steel is considered. A formula for calculating the average strain resistance during rolling with the joint effect of strain rate and cold-hardening is proposed. It is shown that calculating the average deformation resistance in the compression zone with joint consideration of work hardening and strain rate is more accurate