-
Anticorrosive effect of green sulfonated PANI-Zn with epoxy for the corrosion protection of aluminum alloy 6061-T651 Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-24 Natália da Silva Ferreira, Rafael Marinho Bandeira, Maelson Sousa Nunes, Vicente de Sousa Marques, Maria Leticia Vega, Angel Alberto Hidalgo, Mahendra Rai, José Ribeiro dos Santos Junior, José Milton Elias de Matos
The synergistic effect of epoxy resin and PANI-metal composites in anti-corrosion coatings is well known. However, the conventional chemical synthesis of PANI and its composites generates environmentally hazardous waste on an industrial scale. Given this, the study proposes synthesis of PANI-Zn composites by a “green” method to protect the AA6061-T651 alloy against corrosion. For the synthesis, hydrogen
-
Interfacial enhancement by constructing a “flexible-rigid” structure between high-modulus fillers and low-modulus matrix in carbon fiber/silicone rubber composites Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-24 Siyu Liu, Yuanjun Feng, Yanyan Wang, Shuting Zhang, Meijie Yu, Xianming Wang, Chuanjian Zhou
Silicone rubber (SR) has excellent resistance to high temperatures, and carbon fiber (CF) is a commonly reinforced material. However, the application of carbon fiber in SR composites is limited by the large difference in modulus between the two materials. In order to improve the interfacial bonding of the composites and to exert the reinforcement of carbon fibers, a modulus transition interface, a
-
Cell membrane-inspired self-assembly corrosion resistant liquid metal composite coating with photothermal/electrothermal anti-icing/de-icing performance Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-22 Zemin Ji, Xiaobin Huang, Haoqiang Sheng, Xiangzhao Wang
-
Balancing dielectric properties and dimensional stability of poly(amide-imide) films via introducing a micro-crosslinked structure Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-20 Yuhan Peng, Daoxin Zha, Yuanyuan Yin, Shaohua Zeng, Pengpeng Chen
-
Development of fluorosilicon bivalve isocyanate microcapsules for multifunctional coatings with excellent self-repairing properties, enhanced hydrophobicity, and corrosion protection properties Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-20 Hua Xin, Yiyi Xu, Yue Chen, Qi Peng, Xinqi Li, Bo Gao
This study first self-made TMP-IPDI tetramer, and then prepared a fluorine-modified silicon dioxide double shell isocyanate type self-healing microcapsule (CBS-X/TMP-IPDI@PU@F-SiO) using TMP-IPDI tetramer, fluorescent agent 4,4-bis (2-disulfonic acid sodium styrene) biphenyl (CBS-X) as the core material, polyurethane (PU) as the single shell, and fluorine modified silicon dioxide (F-SiO) as the double
-
Designs and recent progress of “pitcher plant effect” inspired ultra-slippery surfaces: A review Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-19 Junwei Li, Bin Lu, Zhengbai Cheng, Haibing Cao, Xingye An
-
A comprehensive study of highly soluble cationic polyfluorene as a polymer anticorrosive coating: Anticorrosion mechanisms and performance evaluation Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-19 Shaopeng Fu, Yichun Peng, Qinghao Sun, Qi Wang, Pangang Li, Hongmei Ma, Zheng Fang, Tianfu Ma, Sanshan Du, Zezhou Liang, Jianfeng Li
When using HCl to remove oxidation from metal surfaces, there is a risk of significant corrosion to the metal substrate. As a common industrial practice, organic or polymer coatings in corrosive environments protect metals from corrosion by providing a barrier on the metal surface within the corrosive medium. However, the limited solubility of polymers in aqueous corrosive mediums restricts their effectiveness
-
Lignin self-healing coatings based on thermo-reversible Diels-Alder reaction for anticorrosion applications Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-19 Jinsong Wang, Farzad Seidi, Xiaotong Shi, Chengcheng Li, Yang Huang, Huining Xiao
-
One-step facile synthesis of non-cytotoxic AgCu-PVA nanocomposite antibacterial coatings Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-18 Hui Tang, Tianhua Zhou, Gongbin Han, Jinkun Liu, Yongqing Xu
-
Sulfobetaine zwitterionic/quaternary ammonium cationic copolymers as high-efficiency antifouling and bactericidal coatings for polyurethane substrates Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-18 Henan Wei, Qiankun Yang, Tiankuan Zhu, Haimei Cao, Kewu Yang, Shiping Zhang
Bacterial infection is a key challenge for implant and blood-contacting biomaterials due to the biofouling and thrombus formation at their interface. Therefore, design and fabrication of high-efficiency antifouling and bactericidal coatings on substrates are extremely important for biomedical devices. In this paper, we successfully developed a coating with high-efficiency antifouling and bactericidal
-
Modified hollow glass microsphere in-situ reinforced polyurethane/polydimethylsiloxane composite coating with self-cleaning and durable passive radiative cooling behaviors Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-17 Weiwei Fan, Heng Li, Zhonghui Wang, Huan Wei, Jun Xiang, Haojun Fan
-
Transparent hydrophilic-oleophobic waterborne coating for multifunctional applications Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-17 Lina Zhang, Kai Feng, Yizhe Liu, Yubo Liu, Xiaowei Pei, Bo Yu, Yang Wu, Lijia Liu, Chunhong Zhang, Feng Zhou
-
Molecular mechanism for the detachment of degradable antifouling coatings Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-17 Jia Cheng, Wen Li, Wei Wang, Jie Zhu, Xin Wang, Shougang Chen
Degradable self-polishing antifouling coatings are expected to be the next generation of antifouling coatings due to their excellent environmental friendliness and static antifouling effect. However, the polishing process and mechanism are still unclear. In this work, steered molecular dynamics (SMD) simulations were conducted to investigate the detaching process and mechanism of the degraded main
-
Comparative study of synthesis of carbon quantum dots via different routes: Evaluating doping agents for enhanced photoluminescence emission Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-16 Faraz Mirlou-Miavagh, Amir Rezvani-Moghaddam, Hossein Roghani-Mamaqani, Uttandaraman Sundararaj
-
Bioinspired hydrophilic adhesive polymer coating for lubricating and antibacterial application Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-15 Chenghao Li, Jinglun Guo, Nan Zhao, Zhuo Chen, Zhenling Shang, Yue Sun, Guoqiang Liu, Feng Zhou, Weimin Liu
-
Advancing steel protection with Ceria@Talc-8-hydroxyquinoline modified Polyurethane coatings Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-15 Sehrish Habib, Ahmadyar Qureshi, Muhammad Faisal, Ramazan Kahraman, Elsadig Mahdi Ahmed, R.A. Shakoor
-
Improved flame resistance and thermal insulation properties of steel fireproof coatings based on polyvinyl alcohol @ expandable graphite Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-13 Dongdong Tang, Liangbo Zhu, Xie Li, Yuan Liu, Qi Wang
-
Cross-link density and moisture barrier properties of organic films prepared by the dual curing of epoxy–acrylate hybrid networks in various solvents Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-12 Soeun Im, Kiho Kim, Mihee Yun, Tae-Yeon Cho, Ji-Ho Eom, Seong-Keun Cho
-
Self–healing core–shell nanofibers for corrosion protective coatings for offshore structures Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-12 Natalia C.M. Spera, Cristina Salazar-Castro, Paula C. Álvarez de Eulate, Yury V. Kolen'ko, Juliana P.S. Sousa
-
Modified epoxy coatings based on BI@ZIF-8@TA for the application of long-effective corrosion protection Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-11 Bo Fang, Jie Xie, Dazhao Yu, Xinyue Zhang, Chaojie Jing, Hui Guo, Yuzhu Li, Wenzuo Li, Jie Liu
-
Fluorine-free, robust, flame-retardant superhydrophobic coating based on a novel branched thiol-ene alkylated siloxane nanocomposite Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-10 Fangyuan Ren, Furong Tao, Tingting Yang, Yuezhi Cui, Libin Liu
Controlling the structure, chemical and thermal properties of the material surface is crucial to improve the utilization of resources and reduce energy consumption. In this work, a simple, fluorine-free spraying strategy is adopted to build a high-performance superhydrophobic coating. The superhydrophobic layer is obtained by mixing the adhesive (prepared by UV-assisted click reaction) with particles
-
Benzothiazole-modified polyurethane antifouling coatings with in-situ migration: Macedonian phalanx offensive-defensive strategy Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-10 Jiawei Tang, Rongrong Chen, Gaohui Sun, Jing Yu, Rumin Li, Peili Liu, Qi Liu, Jinwei Zhang, Jun Wang
-
Simple coating method for the preparation of superhydrophobic flame-retardant cotton fabrics with excellent mechanical stability performance Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-09 Zilong Liu, Tianxiang Ji, Nian Xu, Chenhao Yang, Huaqiang Chu
-
Robust superhydrophobic SiO2/GPE/MWCNTs durable composite coating with photothermal and electrothermal effect for passive anti-icing/active de-icing Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-08 Qian Chen, Xixun Shen, Zuogui Zhang, Qunjie Xu
-
Unfolded graphene riveted on layered double hydroxide as a highly efficient enhancer for the corrosion protective performance of zinc-rich epoxy coatings Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-06 Xingwang Han, Wen Sun, Lida Wang, Kaixin Xu, Zhengqing Yang, Yunsheng Ma, Liqiu Zhao, Shiheng Ma, Wenxiang Xing, Guichang Liu
-
Multifunctional polyphosphazene grafted with triphenylamine and aminostilbene chromophore for electrochromic and sensor application Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-05 Ying Zhou, Minghao Zhai, Chunpeng Ai, Qiang Zhang, Haijun Niu, Wanan Cai, Xiaofeng Zhao, Wen Wang
-
Dual-cured organic–inorganic hard coating with high flexibility and transparency based on polysilsesquioxane and a functional polymer Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-05 Hyunmo Jae, Junyoung Park, Juneun Byun, Won Seok Chi, Jong Hak Kim, Hyun Wook Jung, Dongkyu Roh
-
Zwitterion-bearing silica sol for enhancing antifouling performance and mechanical strength of transparent PDMS coatings Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-05 Jinyan Tan, A. Catarina C. Esteves, Jinlong Yang, Shuxue Zhou
-
Salicylic and tartaric ions co-doped polypyrrole to enhance the corrosion protection of polypyrrole/zinc bilayer coating on ZK60 magnesium alloy in Hank's solution Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-04 Wei Luo, Kai Qi, Yubing Qiu, Xingpeng Guo
-
Efficient self-healing coatings embedded with polydopamine modified BTA@DMSNs for corrosion protection Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-04 Jiaying Jin, Han Yin, Nanqi Shi, Hongxin Luo, Xin Li, Haiyan Li
-
A multi-strategy coating for Al alloy based on orientationally arranged nanosheets doped SiO2 coating and corrosion inhibitor loaded porous anodic alumina film Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-04 Zhihao Zhao, Hao Jiang, Meng Cheng, Shuai Wang, Shuangqing Sun, Chunling Li, Songqing Hu
Although aluminum alloys are widely used in various industries, their wear and corrosion resistance are still needed to be enhanced. In this study, a robust anti-corrosion composite coating was prepared on the surface of Al alloy based on multiple reinforcement strategies. The composite coating is consisted of horizontally arranged and functionally modified h-BN nanosheets doped SiO coating (SiO-hBN(NH)
-
Fabrication of CsPbBr3 nanocrystal/POSS-based copolymer films for non-contact temperature probes Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-04 Pan Zhang, Jiannan Sun, Aizhao Pan, Xuehang Chen, Ke Yan, Gaobo He
Fluorescence-based non-contact temperature measurement has been attested a widely-used technique for temperature aware in rotating mechanical equipment, electrical devices, and other fields. Inspired by the thermal sensitivity of perovskite nanocrystals, we prepared a CsPbBr/polyhedral oligomeric silsesquioxane (POSS)-based composite film with outstanding temperature-photoluminescence (PL) dependence
-
Green one-step modification of spent coffee grounds as synergistic bio-based flame retardant for waterborne epoxy resin Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-04 Danqi Wu, Mengmeng Yang, Tinghao Wu, Yucai Shen, Tingwei Wang
-
Interface engineering of MXene containing phosphorus towards for enhancing the flame retardance and toughness of epoxy resins Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-03 Li Ma, Yadong Wang, Zongmin Zhu
-
Photobleachable coumarin-thioester derivatives with low cytotoxicity as visible-light photoinitiators for free radical and cationic photopolymerization Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-03 Xuechun Li, Wei Jia, Yanjing Gao, Jun Nie, Fang Sun
-
PTFE-based flame retardant coatings optimized by melamine polyphosphate/aluminum diethyl hypophosphite/anhydrous transparent powder through orthogonal experiment Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-01 YaChao Wang, Chunlong Qu, Kang Yu, Zheng Si, Jie Zhang
-
Engineering a hard sol-gel adaptive coating with nonleaching antifoulant against marine biofouling in static conditions Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-01 Yihan Sun, Yuanyuan Shen, Haibin Zhao, Peng Wang
-
Thermally stable and highly soluble UV absorbers for colorless polyimide film: Star-shaped hydroxyphenyl benzotriazole with a tailored trade-off between molecular planarity and distortion Prog. Org. Coat. (IF 6.6) Pub Date : 2024-04-01 Suhyeon Kim, Tae Gyu Hwang, Woo Jin Choi, Hyun Kyu Lee, Hong Mo Kim, Jong Mok Park, Jae Pil Kim
Colorless polyimide (CPI) is a key material of flexible displays characterized by high thermal stability and flexibility. However, it is susceptible to photodegradation induced by ultraviolet (UV) light exposure in its operating environments, thus necessitating the development of a new UV absorber to address this issue. Meanwhile, the high-temperature processing required for CPI synthesis makes the
-
A simple and efficient strategy for preparing anticoagulant coatings on biomedical polyurethane surfaces through a fluorinated urethane prepolymer Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-30 Yandan Zhang, Qin Tang, Ming Cai, Jiating Cai, Suifei Li, Xingmei Deng, Lingran Du, Guodong Ye, Chuanshan Xu, Yugang Huang
Developing an efficient yet uncomplicated method to achieve anticoagulant coatings on biomedical PU surfaces remains a challenge. In this research, we have proposed a very simple way to synthesize fluorinated urethane prepolymers (FPUs) that possess extended fluorocarbon side chains and terminal groups, innovatively using a new fluorinated chain extender and a fluorinated terminal capping agent. These
-
Synthesis and application of silicone-modified polyurethane as a slip-elastic finishing agent for polyamide fabrics Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-30 Yi Wu, Yufa Sun, Kun Chen, Yan Hong, Xiangdong Zhou
-
Microwave assisted self-repairable vitrimeric coating for anti-corrosive applications Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-30 Poonam Singh, Akula Umamaheshwara Rao, Harsh Sharma, Bhashkar Singh Bohra, Tanya Dagar, Nanda Gopal Sahoo, Sravendra Rana, RajKumar Patel
Vitrimeric coatings are revolutionary and most widely emerging materials for metal corrosion inhibition. As harsh environmental conditions damages polymer-derived protective films and results into micro cracks and corroded metal surfaces. In this work, an active microwave responsive vitrimeric epoxy coating embedded with weathering resistant properties is introduced along with systematic comparative
-
Improvement of the anti-corrosion coating properties of waterborne epoxy resin with the incorporation of fluoropolymer-modified silica nanofillers Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-29 Xuan Liu, Xiaofeng Han, Mingxi Wang, Dandan Wang, Guiqiang Fei, Anqiang Chen, Xiaojuan Lai
-
Controlled synthesis of non-functionalized POSS nanoparticles with hydrophobic to hydrophilic wettability transition Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-28 Xuehe Wang, Guang-Xin Chen, Ruolin Han, Zheng Zhou, Qifang Li
The surface characteristics of nanoparticles is essential for practical applications, which is usually modulated by chemical modification, high-temperature treatment, and laser etching. Wherein, realizing the wettability transition from hydrophobic to hydrophilic nanoparticle surfaces without physical or chemical modifications remains a great challenge. Here, we propose a strategy to modulate the surface
-
The synthesis and research of a novel organosilicon-modified waterborne blocked polyisocyanate crosslinker with a semi-interpenetrating network structure Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-27 Yu-Ting Cao, Shuai-Wei Lu, Yu-hang Zhou, Jun Wei
The organosilicon intermediate containing hydrophilic tertiary amines was synthesized from N-Methylmonoethanolamine (MEA) and (3-glycidyloxypropyl) trimethoxy silane (GPTMS), followed by neutralization with acetic acid (Ac). Meanwhile, a polyurethane (PU) prepolymer was prepared by sequentially polymerizing hexamethylene diisocyanate trimer (HT-100) with polyethylene glycol (PEG-600) and methoxy polyethylene
-
Biomass carboxylic acid modified hydrotalcites for improving the mechanical strength and recyclability of 100 % biobased carbon content epoxy soybean oil based vitrimers Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-27 Changwei Cui, Youhao Zhang, Weifeng Song, Kangmin Niu
-
Enhancing anticorrosive performance of epoxy-based coatings using magnetite/graphene hybrids modified with ionic liquids Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-27 Loan F. Calheiros Souto, Bluma G. Soares, Ruan R. Henriques, Juliana Santos
Hybrid materials based on magnetite (FeO) and graphene nanoplatelets (GNP) were prepared by the in situ co-precipitation synthesis of FeO in the presence of GNP aqueous dispersion. Alkyl-phosphonium–based ionic liquids bearing bromide (IL102) and diethyl phosphate (IL169) as the counter-anions were used for the first time to improve the dispersion of GNP. The successful preparation of the hybrids and
-
Block copolymers hybrid latex coatings with environment-friendly short-chain perfluoroalkyl: From sequence structure to surface properties Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-27 Xianzhou Qiu, Jiawei Li, Dongming Qi
-
In-situ synthesis of ferrocene modified formaldehyde-free phenolic resin and its temperature-resistant microwave absorbing coating Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-26 Jiayu Yao, Zhongzhou Zhang, Qichen Yin, Fei Chen, Yuhong Liu
-
Self-assembly of modified cellulose nanocrystals on flexible fabric via hydrophobic force induction for versatile applications Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-25 Fan Xiang, Manman Zhao, Xiaoyue Yang, Zhanxiong Li
Over the years, there has been a proliferation of superhydrophobic fabrics constructed by self-assembly techniques. However, most of these suffer from poor mechanical durability and chemical stability, while the complexity of the process severely limits their practical application in textiles with special functionalities. In this study, We have built a self-assembly coating with many advantages such
-
Construction of organophosphate-functionalized α‑zirconium phosphate towards fire-resistant, weather-resistant and antibacterial reinforcement of transparent fireproof coatings applied on wood substrates Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-25 Jingjing Guan, Zheng Wei, Long Yan, Xinyu Tang, Zhisheng Xu
-
Organosilicon-modified double crosslinked waterborne polyurethane coatings Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-25 Yuedong Xing, Xianwen Li, Jianben Xu, Faai Zhang
-
A wood wax oil-based nanocomposite coating with excellent durability, ultraviolet and water resistance for wood finishing Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-23 Xiaodong Wang, Jun Shen, Yu Chen, Lin Li
The development of a multifunctional wood wax oil-based coating holds significant importance in meeting demands for wood protection and enhanced longevity of wood materials. Nevertheless, a simple method of developing such an integrated coating that possesses excellent durability, ultraviolet (UV) resistance, water resistance, and environmental friendliness remains a significant obstacle. In this paper
-
Highly efficient one-component benzylidene cyclopentanone initiators for visible light polymerization Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-23 Xing Huang, Mengquan Shi, Yuxi Zhang, Yunlong Zhang, Yuxia Zhao
-
Waterborne 2-component polyurethane coatings based on acrylic polyols with secondary alcohols Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-23 Kenneth Tran, Yang Liu, Mohsen Soleimani, Frédéric Lucas, Mitchell A. Winnik
-
New electrochemical method for the determination of the barrier properties of corrosion protective coatings Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-21 S. Trujillo, R. Reyes-Riverol, F.R. Garcia-Galvan, S. Fajardo
A novel electrochemical method evaluates the durability of corrosion protective coatings by measuring the galvanic current between a coated AZ31 Mg alloy and a Pt auxiliary electrode in a 2 M NaCl solution. In this work an organo-inorganic sol-gel film was used. The durability criterion, , was selected as the time where the galvanic current reached 1 mA. Validated using EIS, the method showed 82 %
-
Divinyl polysiloxane modified polyacrylate for promoting the directional migration of disperse dyes in digital jet dyeing of polyester fabric without washing Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-21 Lili Wang, Huixian Dong, Keying Zheng, Nasha Zeng, Yinhe Duan, Xi Wang, Minghua Wu
-
Recent advances in cathodic electrodeposition coatings with special reference to resin materials: A comprehensive review Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-20 Sushmit Sen, Amrita Chatterjee, Dakuri Ramakanth, Shiva Singh, Pradip K. Maji
-
Novel indole-based self-polishing environmentally friendly acrylic antifouling coatings Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-20 Kangdi Hu, Ming Li, Chenkai You, Yongkang Zhang, Zhengpin Xu, Yihan Xu, Lihong Fan, Ying Yi, Yingying Chu
-
Interfacial swelling engineered superhydrophobic and electrically conductive coatings for multifunctional piezoresistive sensors Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-19 Xin Luo, Wei Xiao, Jun Yan, Wenwen Su, Ling Wang, Jiefeng Gao
Conductive foam composites (CFCs) based pressure sensors show promising applications in flexible electronics, but it is still difficult to develop cost-effective methods for preparation of multifunctional CFC pressure sensors with a large working strain and environment tolerance. Herein, a facile “carbon nanotubes (CNTs) decoration and simultaneous hydrophobization” method is proposed to fabricate
-
Nanomechanical and nano-FTIR analysis of polyester coil coatings before and after artificial weathering experiments Prog. Org. Coat. (IF 6.6) Pub Date : 2024-03-19 Alexander Wärnheim, Nikolay Kotov, Illia Dobryden, Rosella Telaretti Leggieri, Camilla Edvinsson, Golrokh Heydari, Per-Erik Sundell, Tomas Deltin, C. Magnus Johnson, Dan Persson, Per M. Claesson