-
Accelerating the solving of mechanical equilibrium caused by lattice misfit through deep learning method Adv. Manuf. (IF 5.2) Pub Date : 2024-04-15 Chen-Xi Guo, Hui-Ying Yang, Rui-Jie Zhang
-
Fabrication of micro holes using low power fiber laser: surface morphology, modeling and soft-computing based optimization Adv. Manuf. (IF 5.2) Pub Date : 2024-04-07
Abstract Fiber laser micromachining is found extensive applications at industrial level because it is cheap and simple to use. Due to its high strength and low conductivity titanium is difficult to machine with conventional methods. In this investigation, micro holes were fabricated using a 30 W fiber laser on 2 mm thick α-titanium (Grade 2) and the process parameters were optimized through response
-
Understanding microstructure-property relationships of HPDC Al-Si alloy based on machine learning and crystal plasticity simulation Adv. Manuf. (IF 5.2) Pub Date : 2024-04-06
Abstract Al-Si alloys manufactured via high-pressure die casting (HPDC) are suitable for a wide range of applications. However, the heterogeneous microstructure and unpredictable pore distribution of Al-Si high-pressure die castings result in significant variations in the mechanical properties, thus leading to a complicated microstructure-property relationship that is difficult to capture. Hence, a
-
Sensitivity analysis of near solidus forming (NSF) process with digital twin using Taguchi approach Adv. Manuf. (IF 5.2) Pub Date : 2024-04-03
Abstract Forging at near solidus material state takes advantage of the high ductility of the material at the semi solid or soft-solid state while keeping most of the mechanical properties of a forged part. The technology is at maturity level ready for its industrial implementation. However, to implement the process for complex cases the development of an appropriate digital twin (DT) is necessary.
-
Single-track geometrical characteristics under different energy input and mass addition in coaxial laser cladding Adv. Manuf. (IF 5.2) Pub Date : 2024-04-02 Yan-Hua Bian, Chong-Xin Tian, Bo Chen, Bin-Xin Dong, Shao-Xia Li, Zhi-Yong Li, Yang-Rui Nan, Xiu-Li He, Gang Yu
To provide a broad processing window with a high deposition rate, a comprehensive analysis of single-track geometrical characteristics over a wide range of laser energies and mass inputs in laser cladding is necessary. The formation of a single cladding track of Inconel 718 on a substrate by coaxial laser cladding, with a wide range of laser power from 1 200 W to 3 900 W and a powder feeding rate from
-
Research on parameter identification of fracture model for titanium alloy under wide stress triaxiality based on machine learning Adv. Manuf. (IF 5.2) Pub Date : 2024-03-27
Abstract The abilities to describe the fracture behavior and calibrate the relevant parameters are essential factors in evaluating ductile fracture criteria of titanium alloys. In this study, 14 different shapes and notched specimens were designed for uniaxial tensile and compression experiments to characterize their ductile fracture behaviors. Based on the analysis of plastic behavior and fracture
-
Multi-factor integrated configuration model and three-layer hybrid optimization algorithm framework: turnkey project-oriented rapid manufacturing system configuration Adv. Manuf. (IF 5.2) Pub Date : 2024-03-23 Shu-Lian Xie, Feng Xue, Wei-Min Zhang, Jia-Wei Zhu, Zi-Wei Jia
-
Quality control in multistage machining processes based on a machining error propagation event-knowledge graph Adv. Manuf. (IF 5.2) Pub Date : 2024-03-21
Abstract In multistage machining processes (MMPs), a clear understanding of the error accumulation, propagation, and evolution mechanisms between different processes is crucial for improving the quality of machining products and achieving effective product quality control. This paper proposes the construction of a machining error propagation event-knowledge graph (MEPEKG) for quality control in MMPs
-
Study of atomized discharge ablation-chemical composite machining of SiCp/Al Adv. Manuf. (IF 5.2) Pub Date : 2024-03-17 Xiu-Lei Yue, Zhi-Dong Liu, Shun-Cheng Zhou, Zi-Long Feng
-
Al-enabled properties distribution prediction for high-pressure die casting Al-Si alloy Adv. Manuf. (IF 5.2) Pub Date : 2024-03-17 Yu-Tong Yang, Zhong-Yuan Qiu, Zhen Zheng, Liang-Xi Pu, Ding-Ding Chen, Jiang Zheng, Rui-Jie Zhang, Bo Zhang, Shi-Yao Huang
-
Programming time-dependent behavior in 4D printing by geometric and printing parameters Adv. Manuf. (IF 5.2) Pub Date : 2024-03-16 Yi-Cong Gao, Dong-Xin Duan, Si-Yuan Zeng, Hao Zheng, Li-Ping Wang, Jian-Rong Tan
-
Design and fabrication of an aluminium oxide cutting insert with an internal cooling channel Adv. Manuf. (IF 5.2) Pub Date : 2024-03-13
Abstract This paper presents the design and fabrication of an aluminium oxide cutting insert with an internal cooling channel formed through an additive manufacturing method. The formed insert is subjected to a controlled densification process and analysed through a series of characterisation investigations. The purpose of the study is to develop the design concept and analyse the forming and sintering
-
Nanobiolubricant grinding: a comprehensive review Adv. Manuf. (IF 5.2) Pub Date : 2024-03-09 Yu-Xiang Song, Chang-He Li, Zong-Ming Zhou, Bo Liu, Shubham Sharma, Yusuf Suleiman Dambatta, Yan-Bin Zhang, Min Yang, Teng Gao, Ming-Zheng Liu, Xin Cui, Xiao-Ming Wang, Wen-Hao Xu, Run-Ze Li, Da-Zhong Wang
-
-
Holorailway: an augmented reality system to support assembly operations in the railway industry Adv. Manuf. (IF 5.2) Pub Date : 2024-03-05 Clara Garcia, Mario Ortega, Eugenio Ivorra, Manuel Contero, Pau Mora, Mariano L. Alcañiz
-
Microscale shaping and rounding of ridge arrays and star pattern features on nickel mould via electrochemical polishing Adv. Manuf. (IF 5.2) Pub Date : 2024-02-07 Sana Zaki, Nan Zhang, Michael D. Gilchrist
-
Optimizing mechanical properties of HIPS fabricated with low-cost desktop 3D printers: investigating the impact of process parameters Adv. Manuf. (IF 5.2) Pub Date : 2024-02-05 Jin-Ting Xu, Guang-Wei Zhang, Man-Man Chen
-
Reconstruction method with twisting measurement and compensation for shape sensing of flexible robots Adv. Manuf. (IF 5.2) Pub Date : 2024-01-29 Xiang-Yan Chen, Ting-Ting Shen, Jin-Wu Qian, Ying-Jie Yu, Zhong-Hua Miao
-
Shock effects on the upper limit of the collision weld process window Adv. Manuf. (IF 5.2) Pub Date : 2024-01-27
Abstract The maximum flyer impact velocity based on a dynamic solidification cracking mechanism is proposed to describe the upper limit of collision welding process windows. Thus, the upper limit of the weld window is governed by the evolution of dynamic stresses and temperatures at the weld interface. Current formulations for the upper limit of the collision weld window assume that both the flyer
-
Surface quality investigation in high-speed dry milling of Ti-6Al-4V by using 2D ultrasonic-vibration-assisted milling platform Adv. Manuf. (IF 5.2) Pub Date : 2024-01-22 Jin Zhang, Li Ling, Qian-Yue Wang, Xue-Feng Huang, Xin-Zhen Kang, Gui-Bao Tao, Hua-Jun Cao
-
Research on feed-pulse collaborative control method in micro-electrical discharge machining Adv. Manuf. (IF 5.2) Pub Date : 2024-01-06 Qiang Gao, Ya-Ou Zhang, Xue-Cheng Xi, Yuan-Ding Wang, Xiao-Fei Chen, Wan-Sheng Zhao
-
Study on a probabilistic algorithm for the forming and 3D characterization of special-shaped surfaces under profile grinding Adv. Manuf. (IF 5.2) Pub Date : 2024-01-05 Zhao-Qing Zhang, Kai-Ning Shi, Yao-Yao Shi, Yi-Hui Song, Zhe He, Ya-Song Pu
-
Cutting performance of saw blades with microtextured rougher and finisher sawteeth Adv. Manuf. (IF 5.2) Pub Date : 2024-01-04 Yang Lu, Jian-Xin Deng, Zhi-Hui Zhang, Jia-Xing Wu, Ran Wang, Yi-Chen Bao
-
A novel weld-pool-length monitoring method based on pixel analysis in plasma arc additive manufacturing Adv. Manuf. (IF 5.2) Pub Date : 2024-01-04 Bao-Ri Zhang, Yong-Hua Shi
-
A condition-based maintenance policy for reconfigurable multi-device systems Adv. Manuf. (IF 5.2) Pub Date : 2023-12-07 Shu-Lian Xie, Feng Xue, Wei-Min Zhang, Jia-Wei Zhu
-
Evolution of inner wall wrinkle defects in the sinking zone of a thick-walled steel tube during radial forging Adv. Manuf. (IF 5.2) Pub Date : 2023-11-30 Yu-Zhao Yang, Cheng Xu, Li-Xia Fan
-
Energy-efficient buffer and service rate allocation in manufacturing systems using hybrid machine learning and evolutionary algorithms Adv. Manuf. (IF 5.2) Pub Date : 2023-11-22 Si-Xiao Gao, Hui Liu, Jun Ota
-
Universal and efficient hybrid modeling and direct slicing method for additive manufacturing processes Adv. Manuf. (IF 5.2) Pub Date : 2023-11-22 Sen-Lin Wang, Li-Chao Zhang, Chao Cai, Ming-Kai Tang, Si Chen, Jiang Huang, Yu-Sheng Shi
-
Study on 6-DOF active vibration-isolation system of the ultra-precision turning lathe based on GA-BP-PID control for dynamic loads Adv. Manuf. (IF 5.2) Pub Date : 2023-11-01 Bo Wang, Zhong Jiang, Pei-Da Hu
-
Non-contact and full-field online monitoring of curing temperature during the in-situ heating process based on deep learning Adv. Manuf. (IF 5.2) Pub Date : 2023-10-18 Qiang-Qiang Liu, Shu-Ting Liu, Ying-Guang Li, Xu Liu, Xiao-Zhong Hao
-
A data-driven approach to RUL prediction of tools Adv. Manuf. (IF 5.2) Pub Date : 2023-10-10 Wei Li, Liang-Chi Zhang, Chu-Han Wu, Yan Wang, Zhen-Xiang Cui, Chao Niu
-
Two-dimensional precise figuring of 500 mm-long X-ray mirror using one-dimensional ion beam system Adv. Manuf. (IF 5.2) Pub Date : 2023-09-25 Qiu-Shi Huang, Han-Dan Huang, Qiao-Yu Wu, Jun Yu, Zhong Zhang, Zhan-Shan Wang
-
Manufacturing task data chain-driven production logistics trajectory analysis and optimization decision making method Adv. Manuf. (IF 5.2) Pub Date : 2023-09-04 Lin Ling, Zhe-Ming Song, Xi Zhang, Peng-Zhou Cao, Xiao-Qiao Wang, Cong-Hu Liu, Ming-Zhou Liu
-
Quality assessment of friction-stir-welded aluminum alloy welds via three-dimensional force signals Adv. Manuf. (IF 5.2) Pub Date : 2023-08-30 Ji-Hong Dong, Yi-Ming Huang, Jia-Lei Zhu, Wei Guan, Xu-Kai Ren, Huan-Wei Yu, Lei Cui
-
Grain size effect on the assembly quality of micro-scaled barrel formed by microforming Adv. Manuf. (IF 5.2) Pub Date : 2023-08-28 Dien Hu, Jieyichen Fang, Feng Zeng, Ming-Wang Fu
-
In-situ powder mixing for laser-based directed energy deposition of functionally graded materials Adv. Manuf. (IF 5.2) Pub Date : 2023-08-27 Ji-Peng Chen, Shou-Chun Xie, He Huang
-
Effect of cooling media on bead geometry, microstructure, and mechanical properties of wire arc additive manufactured IN718 alloy Adv. Manuf. (IF 5.2) Pub Date : 2023-08-26 Parveen Kumar, Satish Kumar Sharma, Ratnesh Kumar Raj Singh
-
Process planning and contour-based error compensation for precision grinding of miniature scalpels Adv. Manuf. (IF 5.2) Pub Date : 2023-08-23 Cheng Fan, Cao-Yang Xue, Jun Zhao, Wei Jiang, Wen-Ge Han, Lei Zhang, Li-Ning Sun
-
Model-driven path planning for robotic plasma cutting of branch pipe with single Y-groove based on pipe-rotating scheme Adv. Manuf. (IF 5.2) Pub Date : 2023-08-18 Yan Liu, Qiu Tang, Xin-Cheng Tian
-
Novel intelligent reasoning system for tool wear prediction and parameter optimization in intelligent milling Adv. Manuf. (IF 5.2) Pub Date : 2023-07-14 Long-Hua Xu, Chuan-Zhen Huang, Zhen Wang, Han-Lian Liu, Shui-Quan Huang, Jun Wang
-
Leader-follower consensus of nonlinear agricultural multiagents using distributed adaptive protocols Adv. Manuf. (IF 5.2) Pub Date : 2023-07-12 Yu-Chen Qian, Zhong-Hua Miao, Jin Zhou, Xiao-Jin Zhu
-
Digital twin-driven green material optimal selection and evolution in product iterative design Adv. Manuf. (IF 5.2) Pub Date : 2023-07-08 Feng Xiang, Ya-Dong Zhou, Zhi Zhang, Xiao-Fu Zou, Fei Tao, Ying Zuo
-
Predictive defect detection for prototype additive manufacturing based on multi-layer susceptibility discrimination Adv. Manuf. (IF 5.2) Pub Date : 2023-06-14 Jing-Hua Xu, Lin-Xuan Wang, Shu-You Zhang, Jian-Rong Tan
-
Insight into deformation allocation in the multi-pass roll forming of a double-walled brazed tube Adv. Manuf. (IF 5.2) Pub Date : 2023-06-13 Meng-Meng Liu, Yu-Li Liu, Heng Li
-
Alternative flexible correction forming of a blade: multipoint correction with surface measurement and deformation simulation Adv. Manuf. (IF 5.2) Pub Date : 2023-06-04 Da-Wei Zhang, Wen-Long Gao-Zhang, Qi Zhang
-
Smoothing strategy for corner of small curvature radius by abrasive waterjet machining Adv. Manuf. (IF 5.2) Pub Date : 2023-06-03 Jian-Feng Chen, Ye-Min Yuan, Hang Gao, Tian-Yi Zhou
-
Development of metal-organic deposition-derived second-generation high-temperature superconductor tapes and artificial flux pinning Adv. Manuf. (IF 5.2) Pub Date : 2023-06-02 Dong-Xu Wang, Jing Chen, Di-Fan Zhou, Chuan-Bing Cai
-
Prediction of temperature field in machined workpiece surface during the cutting of Inconel 718 coated with surface-active media Adv. Manuf. (IF 5.2) Pub Date : 2023-05-27 Qing-An Yin, Zhan-Qiang Liu, Bing Wang
-
An analytical method for assessing the initiation and interaction of cracks in fused silica subjected to contact sliding Adv. Manuf. (IF 5.2) Pub Date : 2023-05-19 Chang-Sheng Li, Na Zhao, Liang-Chi Zhang, Jian-Jun Ding, Lin Sun, Duan-Zhi Duan, Cheng-Wei Kang, Zhuang-De Jiang
-
Rapid development methodology of agricultural robot navigation system working in GNSS-denied environment Adv. Manuf. (IF 5.2) Pub Date : 2023-05-18 Run-Mao Zhao, Zheng Zhu, Jian-Neng Chen, Tao-Jie Yu, Jun-Jie Ma, Guo-Shuai Fan, Min Wu, Pei-Chen Huang
-
Precision wire electrochemical machining of thick structures in powder superalloy René 88DT using a partially insulated tube electrode Adv. Manuf. (IF 5.2) Pub Date : 2023-05-09 Cheng Tang, Zhao Han, Zhong-Qi Zhou, Xiao-Long Fang
-
Melt flow, solidification structures, and defects in 316 L steel strips produced by vertical centrifugal casting Adv. Manuf. (IF 5.2) Pub Date : 2023-05-07 Li-Bing Liu, Cong-Hui Hu, Yun-Hu Zhang, Chang-Jiang Song, Qi-Jie Zhai
-
Proposition of atomic and close-to-atomic scale manufacturing Adv. Manuf. (IF 5.2) Pub Date : 2023-05-04 Ju-Fan Zhang, Jens Ducree
Atomic and close-to-atomic scale manufacturing (ACSM) is the core competence of Manufacturing III. Unlike other conceptions or terminologies that only focus on the atomic level precision, ACSM defines a new realm of manufacturing where quantum mechanics plays the dominant role in the atom/molecule addition, migration and removal, considering the uncertainty principle and the discrete nature of particles
-
Real-time K-TIG welding penetration prediction on embedded system using a segmentation-LSTM model Adv. Manuf. (IF 5.2) Pub Date : 2023-03-29 Yong-Hua Shi, Zi-Shun Wang, Xi-Yin Chen, Yan-Xin Cui, Tao Xu, Jin-Yi Wang
-
Experimental study on surface integrity refactoring changes of Ti-17 under milling-ultrasonic rolling composite process Adv. Manuf. (IF 5.2) Pub Date : 2023-03-27 Zheng Zhou, Chang-Feng Yao, Liang Tan, Ya Zhang, Yi Fan
-
Research on conductive-material-filled electrodes for sidewall insulation performance in micro electrochemical machining Adv. Manuf. (IF 5.2) Pub Date : 2023-03-21 Guo-Dong Liu, Yu-Lan Zhu, Sheng-Gui Liu, Chao-Jiang Li
-
Coupling effect of micro-textured tools and cooling conditions on the turning performance of aluminum alloy 6061 Adv. Manuf. (IF 5.2) Pub Date : 2023-03-13 Guo-Liang Liu, Jin-Tao Zheng, Chuan-Zhen Huang, Shu-Feng Sun, Xin-Fu Liu, Long-Jie Dai, De-Xiang Wang, Xiang-Yu Wang
-
Application of sensor data based predictive maintenance and artificial neural networks to enable Industry 4.0 Adv. Manuf. (IF 5.2) Pub Date : 2023-03-04 Jon Martin Fordal, Per Schjølberg, Hallvard Helgetun, Tor Øistein Skjermo, Yi Wang, Chen Wang
-
An iterative blending integrating grinding force model considering grain size and dislocation density evolution Adv. Manuf. (IF 5.2) Pub Date : 2023-03-04 Zi-Shan Ding, Yun-Hui Zhao, Miao-Xian Guo, Wei-Cheng Guo, Chong-Jun Wu, Steven Y. Liang
-
Stage identification and process optimization for fast drilling EDM of film cooling holes using KBSI method Adv. Manuf. (IF 5.2) Pub Date : 2023-03-01 Jian Wang, Xue-Cheng Xi, Ya-Ou Zhang, Fu-Chun Zhao, Wan-Sheng Zhao