-
Path-Integrated X-Ray Digital Image Correlation using Synthetic Reference Images Exp. Tech. (IF 1.6) Pub Date : 2024-04-12 S. S. Fayad, E.M.C. Jones, C. Winters
-
Optimizing Metrological Efficiency: Comparative Analysis of Filtering Methods for 2D DIC Exp. Tech. (IF 1.6) Pub Date : 2024-04-11 T. Fourest
-
Damage Evolution Model Considering Fatigue Failure Factor Under Multiaxial Non-Proportional Loading Exp. Tech. (IF 1.6) Pub Date : 2024-04-04 Z. Ren, X. Qin, Q. Zhang, Y. Sun
The Chaudonneret model cannot fully and effectively characterize the linear correlation between the strain energy density release rate and the number of cycles in the damage evolution stage of low carbon alloy steels under multiaxial non-proportional loading. In order to solve this problem, the fatigue failure process of Q355B is captured by digital image correlation technology, and the factors affecting
-
On the Cover: High‑Order Time‑Domain DIC Algorithm Based on a Nonlinear Optical Flow Equation Exp. Tech. (IF 1.6) Pub Date : 2024-03-04
-
Integration of Discrete Wavelet and Fast Fourier Transforms for Quadcopter Fault Diagnosis Exp. Tech. (IF 1.6) Pub Date : 2024-02-21 A. A. Jaber, L. A. Al-Haddad
-
An Experimental Study on the Dependency of Thermal Resistance of Additively Manufactured Micro-Channel Heat Sinks on Channel Cross-Sections Exp. Tech. (IF 1.6) Pub Date : 2024-02-21 A.N. Kivanani, S. Khalilpourazary, F. Mobadersani
-
Parametrisation of Uniform Deformation in Ductile Metals Using Digital Image Correlation Technology Exp. Tech. (IF 1.6) Pub Date : 2024-02-17 J. Tabin, A. Brodecki
-
Test Setup for Investigating the Impact Behavior of Biaxially Prestressed Composite Laminates Exp. Tech. (IF 1.6) Pub Date : 2024-02-08 C. Pongratz, J. Tix, J. Wolfrum, S. Gerke, I. Ehrlich, M. Brünig
-
Experimental Modeling and Multi-Response Optimization in Friction Stir Welding Process Parameters of AA2024-T3 Using Response Surface Methodology and Desirability Approach Exp. Tech. (IF 1.6) Pub Date : 2024-01-30
Abstract This work deals with the regression models and multi-objective optimization method of the ultimate tensile strength, percentage of elongation, and average arithmetic surface roughness of butt friction stir welded AA2024-T3 aluminum alloy. Machining experiments were carried out according to the face centered central composite design of the response surface methodology. The effect of friction
-
Statistical Analysis of the Vibrations Transmitted From an Electric Kick Scooter to Riders Exp. Tech. (IF 1.6) Pub Date : 2024-01-24 A. D. Vella, E. Digo, L. Gastaldi, S. Pastorelli, A. Vigliani
-
Computing Effective Mass Using the Modal Craig Bampton Framework Exp. Tech. (IF 1.6) Pub Date : 2024-01-24 B. R. Pacini, R. L. Mayes
-
A Lightweight Damage Diagnosis Method for Frame Structure Based on SGNet Model Exp. Tech. (IF 1.6) Pub Date : 2024-01-24 C. Cai, W. Fu, X. Guo, D. Wu, J. Ren
-
Measurement of Residual Stress in Titanium Alloy Wide-Chord Hollow Fan Blade Based on Multiple-Cut Contour Method Exp. Tech. (IF 1.6) Pub Date : 2024-01-24 L.-X. Fan, N. Han
-
The Direct Coupling of Modal and Impedance Based Components Exp. Tech. (IF 1.6) Pub Date : 2024-01-10 J. A. Seymour, P. Avitabile
-
Design and Fabrication of Indium Tin Oxide Based Thin Film Piezoresistive Pressure Sensor Exp. Tech. (IF 1.6) Pub Date : 2024-01-05 S. Mala, H. K. E. Latha, A. Udayakumar
-
An Investigation of the Effects of Parameters on the Development of Nuggets and the Tensile Properties of IN-625 During Resistance Spot Welding Exp. Tech. (IF 1.6) Pub Date : 2023-12-26 A. Mashhuriazar, S. E. Mirsalehi, K. Moradi
-
Experimental and Numerical Assessment of Flatwise Compression Behaviors of Sandwich Panels: Comparison Between Aluminum, Innegra Fiber and Glass/Epoxy New Symmetric Lattice Cores Exp. Tech. (IF 1.6) Pub Date : 2023-12-21 H. Norouzi, M. Mahmoodi
-
Cascade Control Method for Conducting Hybrid Simulation with Stiff Specimens Exp. Tech. (IF 1.6) Pub Date : 2023-12-13 S. You, X. S. Gao, B. Thoen, C. French, E. Cosgriff, P. Bergson
-
Analyzing the Contraction Force of Artificial Muscles Under Negative Pressure Actuation Exp. Tech. (IF 1.6) Pub Date : 2023-12-04 Z. Wu, P. Zhao, J. Lei
-
Spot Joining of PVC to Aluminum Sheets via Cold Forward Extrusion Exp. Tech. (IF 1.6) Pub Date : 2023-11-29 I.T. Abdullah, M.H. Ridha, M.K. Mejbel, S.K. Hussein
-
On Extracting Stress–Strain Curves of Porous Multi-Phase Sintered Steels by Microindentation Exp. Tech. (IF 1.6) Pub Date : 2023-11-29 Z. Tomić, T. Jarak, B. Pavlović, Z. Tonković
-
Investigation on the Design and Application of Hydraulic Loading Fatigue Test Device for Non-Vascular Stent Exp. Tech. (IF 1.6) Pub Date : 2023-11-20 Y. Li, J. Li, M. Mao, H. Yin, X. Ni, C. Pan
-
Experimental Modal Analysis and Operational Deflection Shape Analysis of a Cantilever Plate in a Wind Tunnel with Finite Element Model Verification Exp. Tech. (IF 1.6) Pub Date : 2023-11-20 D. T. Will, W. D. Zhu
-
On the Cover: Analysis of Puncture Performances of Vibration Assisted Technology Exp. Tech. (IF 1.6) Pub Date : 2023-11-13
-
Mechanical Behavior of Seamless Pipes Using Ring Expansion Technique and Novel Hoop Stress Correlation Factor (K) Exp. Tech. (IF 1.6) Pub Date : 2023-11-02 K. Abdelgawad, A. Nassef, Mohamed T. Eraky, M. Saber
-
Experimental and Numerical Investigation of Delamination Between Epoxy Molding Compound (EMC) and Metal in Encapsulated Microelectronic Packages Exp. Tech. (IF 1.6) Pub Date : 2023-10-27 M.-K. Shih, Y.-H. Liu, G.-S. Lin, E. Hsu, J. Yang
-
Parameters Identification of a Generalized Prandtl-Ishlinskii Model for a Micro-Positioning Stage Using Mutual Shape Memory Alloy Actuators Exp. Tech. (IF 1.6) Pub Date : 2023-10-17 H. Rahbari, A. Fathi, M. Dardel
-
Analysis and Solution for the Vibration of Direct-Acting Pressure Valve Under Small Opening Conditions Exp. Tech. (IF 1.6) Pub Date : 2023-10-11 F. Hou, C. Liu, J. Wang, Y. Lu, X. Liu, H. Jiang, Z. Tang, P. Fang
-
Soft Computing Based Parametric Optimization of Cutting Rate, Surface Roughness, and Kerf Width in Wire Electric Discharge Machining of High Strength Ti-3Al-2.5 V Exp. Tech. (IF 1.6) Pub Date : 2023-10-11 Anshuman Kumar, Chandramani Upadhyay, Naveen Kumar, A. V. S. Ram Prasad, Dusanapudi Siva Nagaraju
-
Experimental Study on Coupling Dynamics of a High Dimensional Nonlinear Riser Structure and Floating Platform by Truncated Equivalent Method Exp. Tech. (IF 1.6) Pub Date : 2023-09-28 L. Guo, X. Pang, J. Kuang, S. Liu, Y. Nie
-
A Numerical Prediction for Hole-Splitting Damage of DP Steels Based on Plastic Work Criterion Using a Polynomial Stress Potential Exp. Tech. (IF 1.6) Pub Date : 2023-09-26 M. Firat, T. A. Akşen, B. Şener, E. Esener
-
Integration of Experimental Methods for the Correlation of Hardness with the Propagation Velocity of Ultrasonic Signals in Steel: A Proposal for an Undergraduate Material Science Lecture Exp. Tech. (IF 1.6) Pub Date : 2023-09-19 E. Rojas-Mancera, A. Balvantín, J. A. Diosdado-De-la-Peña, E. Hernández-Rodríguez
-
Discussion of “Experimental Study on Mechanical Behavior of Sand Improved by Polyurethane Foam”, by Ghasemi et al. (2023), Published in Experimental Techniques. DOI.org/10.1007/s40799-023-00633-5 Exp. Tech. (IF 1.6) Pub Date : 2023-09-15 A. C. Taiba, Y. Mahmoudi, M. Belkhatir
-
Small-Scale Wind Tunnel for the Investigation of the Influence of Environmental Conditions on the Performance of Building Materials Exp. Tech. (IF 1.6) Pub Date : 2023-09-12 R. Cacciotti, B. Wolf, M. Macháček
-
The Impact of the Rotary Friction Welding Pressure on the Mechanical and Microstructural Characteristics of Friction Welds Made of the Alloys TiAl6V4 and 2024 Aluminum Exp. Tech. (IF 1.6) Pub Date : 2023-09-11 H. E. Lakache, A. May, R. Badji, S. E. Benhammouda, S. Ramtani
-
On the Cover: Deflection Measurement of Bridge Using Images Captured Under the Bridge by Sampling Moiré Method Exp. Tech. (IF 1.6) Pub Date : 2023-09-05
-
Effect of Particle Concentration and Size on the Time-Averaged Velocity of Oil Exp. Tech. (IF 1.6) Pub Date : 2023-08-23 C. Bin, L. Ge
-
Numerical and Experimental Buckling Analysis for Circular Plates Exp. Tech. (IF 1.6) Pub Date : 2023-08-22 H. Akbulut, M. F. Bingöl
-
Liquid Jet Breakup and Penetration in a Gas Cross-Flow -An Experimental Study Exp. Tech. (IF 1.6) Pub Date : 2023-08-22 M. Pourrousta, M. M. Larimi, M. Biglarian, P. Hedayati
-
Frequency Based Substructuring and Coupling Enhancement Using Estimated Rotational Frequency Response Functions Exp. Tech. (IF 1.6) Pub Date : 2023-08-18 W.I.I.W.I. Mirza, A. Kyprianou, T. A.N. da Silva, M.N.A. Rani
-
Model Validation of Rigid Body Tilting of Deformed Spinning Discs with Spline-Guided Constraints Exp. Tech. (IF 1.6) Pub Date : 2023-07-20 J. Xue, B. Ma, M. Chen, L. Yu, L. Zheng
-
Nine Point Bending Test Technique for Understanding of Sintered Silver Die Bonding Failure Mechanism Exp. Tech. (IF 1.6) Pub Date : 2023-07-19 K. Wakamoto, K. Fuji, T. Otsuka, K. Nakahara, T. Namazu
-
Locating Impacts Through Structural Vibrations Using the FEEL Algorithm Without a Known Input Force Exp. Tech. (IF 1.6) Pub Date : 2023-07-10 B. T. Davis, Y. MejiaCruz
-
Experimental Study of Helical Milling Carbon Fiber Reinforced Plastics by Variable Parameters Exp. Tech. (IF 1.6) Pub Date : 2023-07-08 A. Jiao, Y. Zhang, J. Zhang, J. Li
-
-
In-Situ Magnetic Barkhausen Noise Measurements to Identify Elastic-Plastic Deformation and Failure in Different Steels Exp. Tech. (IF 1.6) Pub Date : 2023-06-29 J. Chai, Z. Shen, J. Zhong, B. Xu, Z. Zhang, X. Zhang, J. Shen
-
Double Stage Friction Stir Spot Extrusion Welding: a Novel Manufacturing Technique for Joining Sheets Exp. Tech. (IF 1.6) Pub Date : 2023-06-26 I.T. Abdullah, M.K. Mejbel, B.M.A. Al-bhadle
-
Impact-Pose Estimation Using ArUco Markers in Structural Dynamics Exp. Tech. (IF 1.6) Pub Date : 2023-06-21 G. Čepon, D. Ocepek, M. Kodrič, M. Demšar, T. Bregar, M. Boltežar
-
An Experimental Study of a Steady Plane Wall Jet with Different Reynolds Numbers, Coflow Stream and Surface Conditions Exp. Tech. (IF 1.6) Pub Date : 2023-06-22 YL. Zhong, ZT. Yan, E. Savory, XP. Liu, J. Luo, XG. Yang, JY. Cao
-
Low-Velocity Impact Damage Quantification on Sandwich Panels by Thermographic and Ultrasonic Procedures Exp. Tech. (IF 1.6) Pub Date : 2023-06-22 A. Pirinu, A. Saponaro, R. Nobile, F. W. Panella
-
Extracting Time-Varying Dynamic Characteristics of a Typical TPS Plate via Thermal-Vibration Experiment Exp. Tech. (IF 1.6) Pub Date : 2023-06-21 C. Xue, Y. Li, H. Ma, Q. Fei
-
High-Order Time-Domain DIC Algorithm Based on a Nonlinear Optical Flow Equation Exp. Tech. (IF 1.6) Pub Date : 2023-06-07 S. Dai, Y. Xiao, Y. Wu, X. Wen
-
The Effects of Aging Process After Solution Heat Treatment on Drilling Machinability of Corrax Steel Exp. Tech. (IF 1.6) Pub Date : 2023-06-01 A.S. Güldibi, U. Köklü, O. Koçar, E. Kocaman, S. Morkavuk
-
A Comparative Study of the Static and Dynamic Characteristics of Jute and Glass Fiber-Reinforced Polyester Composites Exp. Tech. (IF 1.6) Pub Date : 2023-06-01 M. Rizal, A.Z. Mubarak, T.R. Alhaidar
-
Analysis of Traction Coefficient Subject to Rail Cleaning Effect Based on Tribomachine Measurements Exp. Tech. (IF 1.6) Pub Date : 2023-05-18 E. Bernal, D. Camacho, M.L. Rahaman, M. Spiryagin, Q. Wu, B. Sneath, C. Bosomworth, C. Cole
-
Influence of Slip Table of the Shaker System on the Experimentally Obtained Fundamental Lateral Mode Frequency of a Spacecraft Exp. Tech. (IF 1.6) Pub Date : 2023-05-15 Renji K
-
Low-Cost Rotor Balance Training Design Exp. Tech. (IF 1.6) Pub Date : 2023-05-12 R. A. Figueroa Díaz, A.deJ. Balvantín García, P. Cruz Alcantar, L. Rangel Lucas, L. Esquer Barahona, V. A. Ramírez Elías
-
Numerical and Experimental Study of Wind Effect on the Storage Tanks Based the Tank Adjacency Exp. Tech. (IF 1.6) Pub Date : 2023-05-12 H. R. Davarzani, A. Ganjali, H. Sadeghi, R. Mohebbi
-
Implementation of an Optical Measurement Method for Monitoring Mechanical Behaviour Exp. Tech. (IF 1.6) Pub Date : 2023-05-11 A. Bontemps, G. Godi, E. Fournely, R. Moutou-Pitti, J. Gril
-
Laser Speckle Pattern Stability in Hypersonic Regimes for Experimental Mechanics and Metrological Studies Exp. Tech. (IF 1.6) Pub Date : 2023-05-01 L. T. Keene, J. S. Lum, E. Busby, A. C. Rousso, B. M. Goldberg, G. M. Buck, J. S. Stolken