Abstract
We study the flow behavior of a Newtonian fluid in a planar 4:1 contraction channel using two numerical methodologies: the two-relaxation time lattice Boltzmann method (TRT-LBM) and the finite element method (FEM). To confirm the validity of the TRT-LBM, hydrodynamic quantities such that velocity, pressure, and vortex are carefully investigated at the wide ranges of Reynolds numbers (Re = 0.1–100). At first, we analyze the velocity along the channel. The results of TRT-LBM look reasonable and also coincide with the analytical solution and FEM results. Richer features are observed in the pressure profile along the flow direction. At low Reynolds numbers, the one-step change of the slope in the pressure profile is observed near the contraction region. The slope gradually grows up with the increase of Reynolds numbers, and eventually, this evolves the two-step change. Non-monotonic behavior is observed in the characteristics of the vortex. The size of the vortex non-linearly decreases as the Reynolds number increases. Also, the center of the vortex gradually moved toward the corner of the channel as an increase of Reynolds numbers with non-linearity. Not only the velocity and the pressure profiles but also the characteristics of the vortex quantitatively coincide in TRT-LBM and FEM results. Through this study, we confirm the robustness of the TRT-LBM as a simulation tool to investigate inertial flow in a planar contraction geometry.
Similar content being viewed by others
Data Availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Molaeimanesh G, Akbari MH (2014) Water droplet dynamic behavior during removal from a proton exchange membrane fuel cell gas diffusion layer by Lattice-Boltzmann method. Korean J Chem Eng 31(4):598–610
Molaeimanesh GR, Davarani MHS (2016) A pore-scale model for microfibrous ammonia cracking microreactors via lattice Boltzmann method. Korean J Chem Eng 33(4):1211–1219
Lee YK et al (2018) Deposition of sticky spheres in channel flow: Modeling of surface coverage evolution requires accurate sphere-sphere collision hydrodynamics. J Colloid Interface Sci 530:383–393
Montessori A et al (2019) Jetting to dripping transition: critical aspect ratio in step emulsifiers. Phys Fluids 31(2):021703
Kang SK, Hassan YA (2013) The effect of lattice models within the lattice Boltzmann method in the simulation of wall-bounded turbulent flows. J Comput Phys 232(1):100–117
Suga K et al (2015) A D3Q27 multiple-relaxation-time lattice Boltzmann method for turbulent flows. Comput Math Appl 69(6):518–529
Kromkamp J et al (2006) Lattice Boltzmann simulation of 2D and 3D non-Brownian suspensions in Couette flow. Chem Eng Sci 61(2):858–873
Krüger T (2016) Effect of tube diameter and capillary number on platelet margination and near-wall dynamics. Rheol Acta 55(6):511–526
Lee YK, Ahn KH (2017) A novel lattice Boltzmann method for the dynamics of rigid particles suspended in a viscoelastic medium. J Nonnewton Fluid Mech 244:75–84
Lee YK, Ahn KH, Lee SJ (2017) Time-dependent viscoelastic properties of Oldroyd-B fluid studied by advection-diffusion lattice Boltzmann method. Korea-Australia Rheol J 29(2):137–146
Lee YK, Ahn KH (2020) Particle dynamics at fluid interfaces studied by the color gradient lattice Boltzmann method coupled with the smoothed profile method. Phys Rev E 101(5):053302
Lee YK, Hyun K, Ahn KH (2020) The first normal stress difference of non-Brownian hard-sphere suspensions in the oscillatory shear flow near the liquid and crystal coexistence region. Soft Matter 16(43):9864–9875
Al-Jahmany YY, Brenner G, Brunn PO (2004) Comparative study of lattice-Boltzmann and finite volume methods for the simulation of laminar flow through a 4: 1 planar contraction. Int J Numer Meth Fluids 46(9):903–920
Malaspinas O, Courbebaisse G, Deville M (2007) Simulation of generalized Newtonian fluids with the lattice Boltzmann method. Int J Mod Phys C 18(12):1939–1949
Su J et al (2013) Lattice Boltzmann method coupled with the Oldroyd-B constitutive model for a viscoelastic fluid. Phys Rev E 88(5):053304
Ginzburg I (2005) Equilibrium-type and link-type lattice Boltzmann models for generic advection and anisotropic-dispersion equation. Adv Water Resour 28(11):1171–1195
Ginzburg I, Verhaeghe F, d’Humieres D (2008) Two-relaxation-time lattice Boltzmann scheme: about parametrization, velocity, pressure and mixed boundary conditions. Commun Comput Phys 3(2):427–478
d’Humières D, Ginzburg I (2009) Viscosity independent numerical errors for Lattice Boltzmann models: from recurrence equations to “magic” collision numbers. Comput Math Appl 58(5):823–840
Qian Y-H, d’Humières D, Lallemand P (1992) Lattice BGK models for Navier-Stokes equation. EPL (Europhysics Letters) 17(6):479
He X, Luo L-S (1997) Lattice Boltzmann model for the incompressible Navier-Stokes equation. J Stat Phys 88(3–4):927–944
Succi S (2001) The lattice Boltzmann equation: for fluid dynamics and beyond. Oxford University Press, Oxford, UK
Aidun CK, Clausen JR (2010) Lattice-Boltzmann method for complex flows. Annu Rev Fluid Mech 42:439–472
Lallemand P, Luo L-S (2000) Theory of the lattice Boltzmann method: dispersion, dissipation, isotropy, Galilean invariance, and stability. Phys Rev E 61(6):6546
Humieres D (2002) Multiple–relaxation–time lattice Boltzmann models in three dimensions. Philosophical transactions of the royal society of London. Series A Mathemat Phy Eng Sci. 360(1792):437–451
Lallemand P, Luo L-S (2003) Theory of the lattice Boltzmann method: acoustic and thermal properties in two and three dimensions. Phys Rev E 68(3):036706
Luo L-S et al (2011) Numerics of the lattice Boltzmann method: effects of collision models on the lattice Boltzmann simulations. Phys Rev E 83(5):056710
Zou Q, He X (1997) On pressure and velocity boundary conditions for the lattice Boltzmann BGK model. Phys Fluids 9(6):1591–1598
Ladd AJ (1994) Numerical simulations of particulate suspensions via a discretized Boltzmann equation. Part 1. Theoretical foundation. J Fluid Mech 271:285–309
Nguyen N-Q, Ladd A (2002) Lubrication corrections for lattice-Boltzmann simulations of particle suspensions. Phys Rev E 66(4):046708
Acknowledgements
This work was supported by a research grant from Hankyong National University in the year of 2022.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Lee, Y.K. Comparative study of two-relaxation time lattice Boltzmann and finite element methods for a planar 4:1 contraction flow: a Newtonian fluid at finite Reynolds numbers. Korea-Aust. Rheol. J. 35, 47–54 (2023). https://doi.org/10.1007/s13367-023-00052-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13367-023-00052-3