Skip to main content
SpringerLink
Log in

Modelling forgetting due to intermittent production in mixed-model line scheduling

  • Published:
Flexible Services and Manufacturing Journal Aims and scope Submit manuscript

Abstract

Forgetting effects occur whenever production is interrupted and workers lose previously acquired routine. Existing forgetting models primarily focused on the impacts of production breaks in single-product production environments. Consequently, forgetting models neglected times during which a different product type is produced despite being an important cause for forgetting in industrial mixed-model production. Therefore, this work extends existing forgetting models for application in mixed-model line scheduling models by considering times of intermittent production. These are modelled as interruptions in addition to production break interruptions. A routine loss factor is introduced that allows to partially consider times elapsed during which different products are processed. The higher the routine loss factor is, the higher the considered portion of the time elapsed due to intermittent production becomes and the higher becomes the amount of forgetting. Through means of simulation studies it is investigated how the routine loss factor affects the height of learning effects present and the line performance in terms of makespan and flow time. While sequence types with a higher degree of grouping are almost insensitive with respect to the height of the routine loss factor, sequences with no grouping are strongly affected. Depending on the height of the routine loss factor different sequence types are preferred. Hence, not modelling forgetting appropriately can lead to non-optimal schedules.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  • Azzouz A, Ennigrou M, Ben Said L (2018) Scheduling problems under learning effects: classification and cartography. Int J Prod Res 56(4):1642–1661

    Article  Google Scholar 

  • Badiru AB (1995) Multivariate analysis of the effect of learning and forgetting on product quality. Int J Prod Res 33(3):777–794

    Article  MATH  Google Scholar 

  • Bailey CD (1989) Forgetting and the learning curve: a laboratory study. Manag Sci 35(3):340–352

    Article  Google Scholar 

  • Bailey CD, McIntyre EV (2003) Using parameter prediction models to forecast post-interruption learning. IIE Trans 35(12):1077–1090

    Article  Google Scholar 

  • Biskup D (1999) Single-machine scheduling with learning considerations. Eur J Oper Res 115(1):173–178

    Article  MATH  Google Scholar 

  • Biskup D (2008) A state-of-the-art review on scheduling with learning effects. Eur J Oper Res 188(2):315–329

    Article  MathSciNet  MATH  Google Scholar 

  • Burns LD, Daganzo CF (1987) Assembly line job sequencing principles. Int J Prod Res 25(1):71–99

    Article  Google Scholar 

  • Carlson JG, Rowe AJ (1976) How much does forgetting cost. Ind Eng 8(9):40–47

    Google Scholar 

  • Cheng TE, Wang G (2000) Single machine scheduling with learning effect considerations. Ann Oper Res 98(1):273–290

    Article  MathSciNet  MATH  Google Scholar 

  • Dar-El EM, Ayas K, Gilad I (1995) A dual-phase model for the individual learning process in industrial tasks. IIE Trans 27(3):265–271

    Article  Google Scholar 

  • De Jong JR (1957) The effects of increasing skill on cycle time and its consequences for time standards. Ergonomics 1(1):51–60

    Article  Google Scholar 

  • Dondeti VR, Mohanty BB (1998) Impact of learning and fatigue factors on single machine scheduling with penalties for tardy jobs. Eur J Oper Res 105:509–524

    Article  MATH  Google Scholar 

  • Dutton JM, Thomas A (1984) Treating progress functions as a managerial opportunity. Acad Manag Rev 9(2):235–247

    Article  Google Scholar 

  • Elmaghraby SE (1990) Economic manufacturing quantities under conditions of learning and forgetting (EMQ/LaF). Product Plann Control 1(4):196–208

    Article  Google Scholar 

  • Fogliatto FS, Anzanello MJ (2016) Learning curves: the state of the art and research directions. In: Jaber MY (ed) Learning curves: theory, models, and applications. CRC Press, Boca Raton, pp 281–304

    Google Scholar 

  • Framinan J, Leisten R, Ruiz R (2014) Manufacturing scheduling systems: an integrated view of models, methods, and tools. Springer, London

    Book  MATH  Google Scholar 

  • Gawiejnowicz S (2020) A review of four decades of time-dependent scheduling: main results, new topics, and open problems. J Sched 23(1):3–47

    Article  MathSciNet  MATH  Google Scholar 

  • Givi ZS (2014) The effect of learning, forgetting, fatigue, and recovery on the performance of dual-resource constrained (DRC) systems. Ryerson University, Canada

    Google Scholar 

  • Givi ZS, Jaber MY, Neumann WP (2015) Production planning in DRC systems considering worker performance. Comput Ind Eng 87:317–327

    Article  Google Scholar 

  • Globerson S, Levin N (1987) Incorporating forgetting into learning curves. Int J Oper Prod Manag 7(4):80–94

    Article  Google Scholar 

  • Globerson S, Levin N, Shtub A (1989) The impact of breaks on forgetting when performing a repetitive task. IIE Trans 21(4):376–381

    Article  Google Scholar 

  • Glock CH, Grosse EH, Jaber MY, Smunt TL (2019) Applications of learning curves in production and operations management: a systematic literature review. Comput Ind Eng 131:422–441

    Article  Google Scholar 

  • Hancock WM (1967) The prediction of learning rates for manual operations. J Ind Eng 18(1):42–47

    Google Scholar 

  • Hewitt D, Sprague K, Yearout R, Lisnerski D, Sparks C (1992) The effects of unequal relearning rates on estimating forgetting parameters associated with performance curves. Int J Ind Ergon 10(3):217–224

    Article  Google Scholar 

  • Jaber MY (2006) Learning and forgetting models and their applications. In: Badiru AB (ed) Handbook of industrial and systems engineering. CRC Press, Boca Raton, FL, pp 538–564

    Google Scholar 

  • Jaber MY, Bonney M (1996) Production breaks and the learning curve: the forgetting phenomenon. Appl Math Model 2(20):162–169

    Article  MATH  Google Scholar 

  • Jaber MY, Bonney M (1997) A comparative study of learning curves with forgetting. Appl Math Model 21(8):523–531

    Article  MATH  Google Scholar 

  • Jaber MY, Kher HV (2002) The dual-phase learning–forgetting model. Int J Prod Econ 76(3):229–242

    Article  Google Scholar 

  • Jaber MY, Kher HV (2004) Variant versus invariant time to total forgetting: the learn–forget curve model revisited. Comput Ind Eng 46(4):697–705

    Article  Google Scholar 

  • Jaber MY, Sikström S (2004) A numerical comparison of three potential learning and forgetting models. Int J Prod Econ 92(3):281–294

    Article  Google Scholar 

  • Jaber MY, Kher HV, Davis DJ (2003) Countering forgetting through training and deployment. Int J Prod Econ 85(1):33–46

    Article  Google Scholar 

  • Jaber MY, Givi ZS, Neumann WP (2013) Incorporating human fatigue and recovery into the learning–forgetting process. Appl Math Model 37(12):7287–7299

    Article  MathSciNet  MATH  Google Scholar 

  • Kher HV (2000) Examination of flexibility acquisition policies in dual resource constrained job shops with simultaneous worker learning and forgetting effects. J Oper Res Soc 51(5):592–601

    Article  MATH  Google Scholar 

  • Kher HV, Malhotra MK, Philipoom PR, Fry TD (1999) Modeling simultaneous worker learning and forgetting in dual resource constrained systems. Eur J Oper Res 115(1):158–172

    Article  MATH  Google Scholar 

  • Kim S, Nembhard DA (2010) Cross-trained staffing levels with heterogeneous learning/forgetting. IEEE Trans Eng Manag 57(4):560–574

    Article  Google Scholar 

  • Mazur JE., Hastie R (1978) Learning as accumulation: a reexamination of the learning curve. Psychol Bull 85(6):1256–1274

    Article  Google Scholar 

  • McCreery JK, Krajewski LJ (1999) Improving performance using workforce flexibility in an assembly environment with learning and forgetting effects. Int J Prod Res 37(9):2031–2058

    Article  MATH  Google Scholar 

  • Merengo C, Nava F, Pozzetti A (1999) Balancing and sequencing manual mixed-model assembly lines. Int J Prod Res 37(12):2835–2860

    Article  MATH  Google Scholar 

  • Nembhard DA (2000) The effects of task complexity and experience on learning and forgetting: a field study. Hum Factors 42(2):272–286

    Article  Google Scholar 

  • Nembhard DA, Osothsilp N (2001) An empirical comparison of forgetting models. IEEE Trans Eng Manage 48(3):283–291

    Article  Google Scholar 

  • Nembhard DA, Osothsilp N (2002) Task complexity effects on between-individual learning/forgetting variability. Int J Ind Ergon 29(5):297–306

    Article  Google Scholar 

  • Nembhard DA, Uzumeri MV (2000) Experiential learning and forgetting for manual and cognitive tasks. Int J Ind Ergon 25(4):315–326

    Article  Google Scholar 

  • Ostermeier F (2020) The impact of human consideration, schedule types and product mix on scheduling objectives for unpaced mixed-model assembly lines. Int J Prod Res 58(14):4386–4405

    Article  Google Scholar 

  • Shafer SM, Nembhard DA, Uzumeri MV (2001) The effects of worker learning, forgetting, and heterogeneity on assembly line productivity. Manag Sci 47(12):1639–1653

    Article  Google Scholar 

  • Shtub A, Levin N, Globerson S (1993) Learning and forgetting industrial skills: an experimental model. Int J Human Fact Manuf 3(3):293–305

    Article  Google Scholar 

  • Sikström S, Jaber MY (2002) The power integration diffusion model for production breaks. J Exp Psychol Appl 8(2):118

    Article  Google Scholar 

  • Sikström S, Jaber MY (2012) The Depletion–power–integration–latency (DPIL) model of spaced and massed repetition. Comput Ind Eng 63(1):323–337

    Article  Google Scholar 

  • Sikström S, Jaber MY, Neumann WP (2016) Influence of breaks in learning on forgetting curves. In: Jaber MY (ed) Learning curves: theory, models, and applications. CRC Press, Boca Raton, pp 163–172

    Google Scholar 

  • Smunt TL (1987) The impact of worker forgetting on production scheduling. Int J Prod Res 25(5):689–701

    Article  Google Scholar 

  • Sule DR (1978) The effect of alternate periods of learning and forgetting on economic manufacturing quantity. AIIE Trans 10(3):338–343

    Article  Google Scholar 

  • Teyarachakul S, Chand S, Ward J (2011) Effect of learning and forgetting on batch sizes. Prod Oper Manag 20(1):116–128

    Article  Google Scholar 

  • Yue H, Slomp J, Molleman E, Van Der Zee DJ (2008) Worker flexibility in a parallel dual resource constrained job shop. Int J Prod Res 46(2):451–467

    Article  MATH  Google Scholar 

  • Zamiska JR, Jaber MY, Kher HV (2007) Worker deployment in dual resource constrained systems with a task-type factor. Eur J Oper Res 177(3):1507–1519

    Article  MATH  Google Scholar 

Download references

Funding

This research did not receive any specific Grant from funding agencies in the public, commercial, or not-for-profit sectors.

Author information

Authors and Affiliations

  1. BMW Group, Bremer Str. 6, 80807, Munich, Germany

    Frederik Ferid Ostermeier

  2. Institute for Production Systems, Technical University of Dortmund, Leonhard-Euler-Str. 5, 44227, Dortmund, Germany

    Frederik Ferid Ostermeier & Jochen Deuse

  3. Centre for Advanced Manufacturing, University of Technology Sydney, Sydney, Australia

    Jochen Deuse

Authors
  1. Frederik Ferid Ostermeier
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jochen Deuse
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Frederik Ferid Ostermeier.

Ethics declarations

Conflict of interest

No potential conflict of interest has to be reported.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ostermeier, F.F., Deuse, J. Modelling forgetting due to intermittent production in mixed-model line scheduling. Flex Serv Manuf J (2023). https://doi.org/10.1007/s10696-023-09500-2

Download citation

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10696-023-09500-2

Keywords

Search

Navigation