Abstract
Criteria for estimating the operational and economic efficiency of the use of epoxy–sand composites with different contents of the sand component in the hardening of parts of soil-cultivating tools are proposed and substantiated, which allow identifying the feasibility of using abrasive-resistant coatings regardless of their functional purpose, agrotechnical working conditions, design and market price of products after coating.
Similar content being viewed by others
REFERENCES
N. M. Belous, S. A. Belchenko, A. V. Dronov, O. A. Zaitseva, and V. V. Mameev, “Influence of growth regulators on the development and productivity of soybean (glycine max (l.) and sorghum crops (sorghum spp.),” J. Crit. Rev. 7, 1925–1935 (2020).
N. M. Belous, S. A. Belchenko, A. V. Dronov, V. V. Dyachenko, and V. E. Torikov, “Agrobiological characteristics of aftermath ability and shoot structure in cultivation of fodder sorghum,” J. Environ. Treat. Techn. 7, 623–630 (2019).
N. V. Titov, A. V. Kolomeichenko, V. N. Logachev, I. N. Kravchenko, and N. N. Litovchenko, “Investigation of the hardness and wear resistance of working sections of machines hardened by vibroarc surfacing using cermet materials,” Weld. Int. 29, 737–739 (2015).
A. M. Mikhal’chenkov, V. E. Torikov, and Y. I. Filin, “The influence of the concentration of components of an epoxy- sandy composite on its abrasive-wear resistance,” Polym. Sci. Ser. D 11, 47–49 (2018).
A. M. Mikhal’chenkov, V. F. Komogortsev, and Y. I. Filin, “Influence of sand dispersion on the abrasive wear resistance of a composite with an epoxy base,” Vse Mater. Entsiklopedicheskii Spravochnik, No. 2, 33—36 (2017).
A. M. Mikhal’chenkov, M. A. Mikhal’chenkova, S. A. Feskov, and A. A. Kononenko, “Effect of concentration and dispersion of filler fractions on adhesive strength and abrasion resistance of an epoxy and sand composite,” MATEC Web Conf., No. 298, 1–6 (2019).
S. A. Fes’kov, M. A. Mikhal’chenkova, and Ya. Yu. Biryulina, “Wear of the lancet blades of cultivators for sowing on stubble and the choice of a method for their restoration,” Trudy GOSNITI 123, 241—246 (2016).
Yu. I. Filin, “Epoxy composite for increasing the resource of heat-strengthened shares,” Sel’skii Mekhanizator, No. 5, 36—37 (2017).
A. M. Mikhal’chenkov, I. V. Kozarez, A. A. Tyureva, and V. N. Kuz’min, “Procedure for comparative accelerated testing of materials for resistance to abrasive wear as they move in a loose abrasive environment,” Polym. Sci. Ser. D 11, 110–112 (2018).
N. I. Baurova and A. Y. Sergeev, “Structural studies of fracture patterns in adhesive joints after pullout testing,” Polym. Sci. Ser. D 7, 298–302 (2014).
S. G. Mudarisov, I. I. Gabitov, Y. P. Lobachevsky, N. K. Mazitov, R. S. Rakhimov, R. R. Khamaletdinov, I. R. Rakhimov, I. M. Farkhutdinov, A. M. Mukhametdinov, and R. T. Gareev, “Modeling the technological process of tillage,” Soil Tillage Res. 190, 70–77 (2019).
A. I. Kupreenko, K. M. Isaev, Yu. A. Kuznetsov, S. M. Mikhailichenko, I. N. Kravchenko, and L. V. Kalashnikova, “Modeling of mobile tmr mixer operation,” Inmateh Agricult. Eng. 61, 193–198 (2020).
A. I. Kupreenko, K. M. Isaev, A. M. Grin, S. M. Mikhailichenko, A. V. Kolomeichenko, Y. A. Kuznetsov, and L. V. Kalashnikova, “Automated distribution system of feed mixture by using feeding carriage,” Inmateh Agricult. Eng. 58, 239–246 (2019).
Funding
This work was supported by regular institutional funding, and no additional grants were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Transated by K. Gumerov
Rights and permissions
About this article
Cite this article
Mikhalchenkov, A.M., Torikov, V.E., Mikhalchenkova, M.A. et al. Criteria for the Operational and Economic Estimation of the Efficiency of Epoxy–Sand Composites of Different Compositions as Abrasive-Resistant Coatings of Parts of Tillow-Tool Implements. Polym. Sci. Ser. D 16, 746–750 (2023). https://doi.org/10.1134/S1995421223030218
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421223030218