Abstract
This paper considers a technology of obtaining wood-fiber boards (WFB) by the dry method with the use of urea–formaldehyde resin of UFC-FF grade modified with a fusel fraction (a mixture of alcohols). It also studies the effect of the modified binder on physical and mechanical properties of the obtained materials.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
Yu. V. Pas’ko, Candidate’s Dissertation in Engineering (Mosk. Gos. Univ. Lesa, Moscow, 2003)
Yu. V. Pas’ko, V. O. Ekimov, and M. A. Shcheglov, “Study of the physical and mechanical properties of composite materials based on KFK-SF resin,” in Proceedings of Scientific and Engineering Conference of Baumann Moscow State Technical University, 2017, pp. 152–153.
V. E. Tsvetkov, Yu. V. Pas’ko, and M. S. Romanova, “Research of technological properties of KFK-SF,” Nauka bez Granits, No. 12, 46–49 (2017).
Yu. V. Pas’ko and A. A. Vekshina, “Study of the effect of a hydrophobizing additive on the physico-mechanical properties of chipboard,” Nauka bez Granits, No. 5, 65–68 (2018).
M. A. Armizoniva, N. A. Yurochkin, E. I. Kareva, et al., “Study of the effect of an antiseptic additive on the physical and mechanical properties of composite materials,” Nauka bez Granits, No. 6, 75–79 (2018).
Yu. V. Pas’ko, A. S. Pas’ko, and E. Yu. Shepelev, “Study of the effect of an antiseptic additive in resin on the manufacture of glued beams,” Nauka bez Granits, No. 7, 60–63 (2018).
V. E. Tsvetkov, N. N. Tsvetkova, S. V. Priorova, et al., RF Patent No. 2537620 C2 (January 10, 2015).
V. E. Tsvetkov, N. N. Tsvetkova, S. V. Priorova, et al., RF Patent No. 2547749 C2 (April 10, 2015).
V. E. Tsvetkov, N. N. Tsvetkova, M. V. Razuvaeva, et al., RF Patent No. 2527786 C1 (September 10, 2014).
V. E. Tsvetkov, N. N. Tsvetkova, S. V. Priorova, et al., RF Patent No. 2534549 C1 (November 27, 2014).
V. E. Tsvetkov, M. Yu. Zueva, M. V. Razuvaeva, et al., RF Patent No. 2527524 C1 (September 10, 2014).
V. E. Tsvetkov, M. Yu. Zueva, M. V. Razuvaeva, et al., RF Patent No. 2534550 C1 (November 27, 2014).
GOST 4598–2019. Wood-Fiber Boards of the Wet Method of Production. Specifications (Standartinform, Moscow, 2019) [in Russian].
GOST 32274–2021. Plates Wood-Fiber of a Dry Way of Production. Specifications (Russian Institute of Standartization, 2021).
Funding
This work was supported by regular institutional funding, and no additional grants were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by Sh. Galyaltdinov
Rights and permissions
About this article
Cite this article
Pasko, Y.V., Machneva, O.P. Properties of Wood-Fiber Board Manufactured with the Use of UFC-FF Modified Urea–Formaldehyde Resin. Polym. Sci. Ser. D 16, 758–761 (2023). https://doi.org/10.1134/S1995421223030243
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421223030243