Abstract
The reversibility of a moderate thermal treatment (TT) at 120 °C on modern and historical oak wood samples was investigated by 1H nuclear magnetic resonance (NMR) relaxometry, equilibrium moisture content (EMC) determination, and measurements of volumetric deformations. The EMC values showed full reversibility after conditioning the samples at 65% relative humidity (RH) for one week, in agreement with previous research that utilized moderate TTs. However, 1H NMR relaxometry evidenced an irreversible effect on water mobility (i.e., molecular tumbling) for both wood samples. This result is compared to volumetric deformations that are determined by considering two reference states. When using, as a reference, the dry volume at each state, volumetric deformations are consistent with EMC values. However, when using the dry volume of the sample before TT, the volumetric deformations are found to be higher than the ones before TT for modern wood but remain lower for historical wood. The irreversible changes in water dynamics suggest that some modifications of the wood structure have not been completely recovered but are not linked to the changes in volumetric deformations. In addition, 13C solid-state NMR spectroscopy allowed the comparison of the composition between both wood samples, suggesting that their different behavior concerning volumetric deformations could be explained by a lower proportion of acetyl groups from hemicelluloses for historical wood due to its natural aging. We showed that combining macroscopic observations with molecular-level information gained from 1H and 13C NMR leads to a deeper understanding of the effects of thermal treatments and reversibility tests.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Altgen M, Hofmann T, Militz H (2016) Wood moisture content during the thermal modification process affects the improvement in hygroscopicity of Scots pine sapwood. Wood Sci Technol 50:1181–1195. https://doi.org/10.1007/s00226-016-0845-x
Altgen M, Willems W, Hosseinpourpia R, Rautkari L (2018) Hydroxyl accessibility and dimensional changes of Scots pine sapwood affected by alterations in the cell wall ultrastructure during heat-treatment. Polym Degrad Stab 152:244–252. https://doi.org/10.1016/j.polymdegradstab.2018.05.005
Bonnet M, Courtier-Murias D, Faure P et al (2017) NMR determination of sorption isotherms in earlywood and latewood of Douglas fir. Identification of bound water components related to their local environment. Holzforschung 71:481–490. https://doi.org/10.1515/hf-2016-0152
Boonstra MJ, Tjeerdsma B (2006) Chemical analysis of heat treated softwoods. Holz Roh Werkst 64:204–211. https://doi.org/10.1007/s00107-005-0078-4
Borrega M, Kärenlampi PP (2008) Mechanical behavior of heat-treated spruce (Picea abies) wood at constantmoisture content and ambient humidity. Holz Roh Werkst 66:63–69. https://doi.org/10.1007/s00107-007-0207-3
Borrega M, Kärenlampi PP (2010) Hygroscopicity of heat-treated Norway spruce (Picea abies) wood. Eur J Wood Prod 68:233–235. https://doi.org/10.1007/s00107-009-0371-8
Carr H, Purcell E (1954) Effects of diffusion on free precession in nuclear magnetic resonance experiments. Phys Rev 94:630–638. https://doi.org/10.1103/PhysRev.94.630
Čermák P, Rautkari L, Horáček P et al (2015) Analysis of dimensional stability of thermally modified wood affected by re-wetting cycles. BioResources 10:3242–3253. https://doi.org/10.15376/biores.10.2.3242-3253
Courtier-Murias D (2019) Potential and application of magnetic resonance imaging and relaxometry in environmental research. eMagRes. https://doi.org/10.1002/9780470034590.emrstm1603
Cox J, McDonald PJ, Gardiner BA (2010) A study of water exchange in wood by means of 2D NMR relaxation correlation and exchange. Holzforschung. https://doi.org/10.1515/hf.2010.036
Endo K, Obataya E, Zeniya N, Matsuo M (2016) Effects of heating humidity on the physical properties of hydrothermally treated spruce wood. Wood Sci Technol 50:1161–1179. https://doi.org/10.1007/s00226-016-0822-4
Esteves BM, Pereira HM (2008) Wood modification by heat treatment: a review. BioRes 4:370–404. https://doi.org/10.15376/biores.4.1.370-404
García Esteban L, Gril J, de Palacios PDP, Guindeo Casasús A (2005) Reduction of wood hygroscopicity and associated dimensional response by repeated humidity cycles. Ann for Sci 62:275–284. https://doi.org/10.1051/forest:2005020
Gauvin C (2015) Experimental and numerical study of the hygromechanical behaviour of a wooden panel. Université de Montpellier
Goñi-Urtiaga A, Courtier-Murias D, Picca G et al (2022) Response of water-biochar interactions to physical and biochemical aging. Chemosphere 307:136071. https://doi.org/10.1016/j.chemosphere.2022.136071
Guo J, Zhou H, Stevanic JS et al (2018) Effects of ageing on the cell wall and its hygroscopicity of wood in ancient timber construction. Wood Sci Technol 52:131–147. https://doi.org/10.1007/s00226-017-0956-z
Hill C, Altgen M, Rautkari L (2021) Thermal modification of wood—a review: chemical changes and hygroscopicity. J Mater Sci 56:6581–6614. https://doi.org/10.1007/s10853-020-05722-z
Kato KL, Cameron RE (1999) A review of the relationship between thermally-accelerated ageing of paper and hornification. Cellulose 6:23–40. https://doi.org/10.1023/A:1009292120151
Košíková B, Hricovíni M, Cosentino C (1999) Interaction of lignin and polysaccharides in beech wood (Fagus sylvatica) during drying processes. Wood Sci Technol 33:373–380. https://doi.org/10.1007/s002260050123
Majka J, Czajkowski L, Olek W (2016) Effects of cyclic changes in relative humidity on the sorption hysteresis of thermally modified spruce wood. BioResources 11:5265–5275. https://doi.org/10.15376/biores.11.2.5265-5275
Mantanis GI, Young RA, Rowell RM (1994) Swelling of wood: part 1. Swelling in water. Wood Sci Technol. 28:119–134. https://doi.org/10.1007/BF00192691
Mastouri A, Efhamisisi D, Shirmohammadli Y, Oladi R (2021) Physicochemical properties of thermally treated poplar wood in silicone and rapeseed oils: a comparative study. J Build Eng 43:102511. https://doi.org/10.1016/j.jobe.2021.102511
Meiboom S, Gill D (1958) Modified spin-echo method for measuring nuclear relaxation times. Rev Sci Instrum 29:688–691. https://doi.org/10.1063/1.1716296
Mikac U, Merela M, Oven P et al (2021) MR study of water distribution in a beech (Fagus sylvatica) branch using relaxometry methods. Molecules 26:4305. https://doi.org/10.3390/molecules26144305
Obataya E (2017) Effects of natural and artificial ageing on the physical and acoustic properties of wood in musical instruments. J Cult Herit 27:S63–S69. https://doi.org/10.1016/j.culher.2016.02.011
Obataya E, Higashihara T (2017) Reversible and irreversible dimensional changes of heat-treated wood during alternate wetting and drying. Wood Sci Technol 51:739–749. https://doi.org/10.1007/s00226-017-0918-5
Obataya E, Higashihara T, Tomita B (2002) Hygroscopicity of heat-treated wood III. Effect of steaming on the hygroscopicity of wood. Mokuzai Gakkaishi 48:348–355
Obataya E (2007) Effects of ageing and heating on the mechanical properties of wood. In: Wood science for conservation of cultural heritage, Florence 2007 : Proceedings of the international conference Hld by cost action IE0601 in Florence (Italy), 8–10 November 2007. Firenze University Press
Rautkari L, Hill CAS, Curling S et al (2013) What is the role of the accessibility of wood hydroxyl groups in controlling moisture content? J Mater Sci 48:6352–6356. https://doi.org/10.1007/s10853-013-7434-2
Rostom L, Courtier-Murias D, Rodts S, Care S (2020) Investigation of the effect of aging on wood hygroscopicity by 2D 1H NMR relaxometry. Holzforschung 74:400–411. https://doi.org/10.1515/hf-2019-0052
Rostom L, Care S, Courtier-Murias D (2021) Analysis of water content in wood material through 1D and 2D H-1 NMR relaxometry: application to the determination of the dry mass of wood. Magn Reson Chem 59:614–627. https://doi.org/10.1002/mrc.5125
Sahin HI, Guler C (2018) Effect of heat treatment on the dimensional stability of ash (Fraxinus angustifolia Vahl.) wood. Forestist 68:42–52. https://doi.org/10.5152/forestist.2018.005
Sandberg D, Kutnar A, Mantanis G (2017) Wood modification technologies - a review. iFor-Biogeosci for 10:895. https://doi.org/10.3832/ifor2380-010
Song Y-Q, Venkataramanan L, Hürlimann MD et al (2002) T1–T2 correlation spectra obtained using a fast two-dimensional laplace inversion. J Magn Reson 154:261–268. https://doi.org/10.1006/jmre.2001.2474
Stagno V, Mailhiot S, Capuani S et al (2021) Testing 1D and 2D single-sided NMR on roman age waterlogged woods. J Cult Herit 50:95–105. https://doi.org/10.1016/j.culher.2021.06.001
Suchy M, Kontturi E, Vuorinen T (2010a) Impact of drying on wood ultrastructure: similarities in cell wall alteration between native wood and isolated wood-based fibers. Biomacromol 11:2161–2168. https://doi.org/10.1021/bm100547n
Suchy M, Virtanen J, Kontturi E, Vuorinen T (2010b) Impact of drying on wood ultrastructure observed by deuterium exchange and photoacoustic FT-IR spectroscopy. Biomacromol 11:515–520. https://doi.org/10.1021/bm901268j
Wentzel M, Altgen M, Militz H (2018) Analyzing reversible changes in hygroscopicity of thermally modified eucalypt wood from open and closed reactor systems. Wood Sci Technol 52:889–907. https://doi.org/10.1007/s00226-018-1012-3
Willems W, Altgen M, Rautkari L (2020) A molecular model for reversible and irreversible hygroscopicity changes by thermal wood modification. Holzforschung 74:420–425. https://doi.org/10.1515/hf-2019-0057
Willis JM, Herring FG (1987) 13C CP/MAS nuclear magnetic resonance study of the peroxide bleaching of ultra high yield chemimechanical pulp produced from sound and spruce budworm killed balsam fir. Wood Sci Technol 21:373–380. https://doi.org/10.1007/BF00380205
Yang C-N, Hung K-C, Wu T-L et al (2014) Comparisons and characteristics of slicewood acetylation with acetic anhydride by liquid phase, microwave, and vapor phase reactions. BioResources 9:6463–6475. https://doi.org/10.15376/biores.9.4.6463-6475
Acknowledgements
The I-Site Future (Champs-sur-Marne, France) for its financial support and Atelier Perrault (Nantes, France) for providing aged wood are acknowledged.
Author information
Authors and Affiliations
Contributions
L.R., D.C.-M. and S.C. worked on developing the structure and method of the paper. L.R. performed all the experiments except from the 13C NMR experiments which were carried out by C.L. D.C.-M and S.C. wrote the manuscript. All authors provided critical feedback and helped shape the research, analysis and manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Rostom, L., Courtier-Murias, D., Lorthioir, C. et al. Reversible and irreversible effects of a moderate heat treatment on the moisture sorption and swelling behavior of modern and historical oak wood. Wood Sci Technol 57, 1257–1276 (2023). https://doi.org/10.1007/s00226-023-01501-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-023-01501-6