Skip to main content
Log in

The Effect of Earthquake Characteristics on the Seismic Performance of Steel Moment Resisting Frames

  • Published:
International Journal of Steel Structures Aims and scope Submit manuscript

Abstract

The magnitude, distance from the epicenter, effective duration, fault mechanism, and soil conditions influence the structural consequences of earthquakes. Variations in these characteristics cause structures to behave differently during seismic events. This study investigated the influence of some of these parameters on the seismic performance of moment-resistant frames. This was accomplished by simulating various well-known structures while accounting for panel zone and nonlinear component behaviour. Following that, these structures were exposed to several classified earthquake records. The distance from the fault, the soil type, and the fault mechanism were considered while classifying earthquakes. The findings revealed that the median value of story drift in strike-slip fault mechanism holds a greater level of significance when compared to reverse fault mechanism specifically in the context of far-field records. Also applying the near-field records has a greater impact on drifts in taller frames on stiff soils, and increasing the height of the frame has less impact on the fault mechanism effect on structures built on soft soils.

Graphical Abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  • Alavi, B., Krawinkler, H. (2001). Effects of near-fault ground motions on frame structures. John A. Blume Earthquake Engineering Center Stanford.

  • Alothman, A., Mangalathu, S., Al-Mosawe, A., Alam, M. M., & Allawi, A. (2023). The influence of earthquake characteristics on the seismic performance of reinforced concrete buildings in Australia with varying heights. Journal of Building Engineering, 67, 105–957. https://doi.org/10.1016/j.jobe.2023.105957

    Article  Google Scholar 

  • Asgarian, B., Khazaee, H., & Mirtaheri, M. (2012). Performance evaluation of different types of steel moment resisting frames subjected to strong ground motion through Incremental dynamic analysis. International Journal of Steel Structures, 12, 363–379. https://doi.org/10.1007/s13296-012-3006-6

    Article  Google Scholar 

  • Bao, C., Ma, X., Lim, K. S., Chen, G., Xu, F., Tan, F., & Abd Hamid, N. H. (2021). Seismic fragility analysis of steel moment-resisting frame structure with differential settlement. Soil Dynamics and Earthquake Engineering, 141, 106526. https://doi.org/10.1016/j.soildyn.2020.106526

    Article  Google Scholar 

  • Cao, L., Yang, C., & Zhang, J. (2020). Derailment behaviors of the train-ballasted track-subgrade system subjected to earthquake using shaking table. KSCE Journal of Civil Engineering, 24, 2949–2960. https://doi.org/10.1007/s12205-020-0005-6

    Article  Google Scholar 

  • Davis, G. H., Reynolds, S. J., & Kluth, C. F. (2011). Structural geology of rocks and regions. Wiley.

  • De Sutter, S., Verbruggen, S., & Tysmans, T. (2016). Shear behaviour of hybrid composite-concrete beams: Experimental failure and strain analysis. Composite Structures, 152, 607–616. https://doi.org/10.1016/j.compstruct.2016.05.075

    Article  MATH  Google Scholar 

  • Deringöl, A. H., Güneyisi, E. M., & Hansu, O. (2022). Combined effect of bearing stiffness of the base isolator and damping characteristics of the viscous damper on the nonlinear response of buildings. International Journal of Steel Structures, 22, 1497–1517. https://doi.org/10.1007/s13296-022-00656-5

    Article  Google Scholar 

  • Esfahanian, A., & Aghakouchak, A. A. (2019). A single-run dynamic-based approach for pushover analysis of structures subjected to near-fault pulse-like ground motions. Journal of Earthquake Engineering, 23, 725–749. https://doi.org/10.1080/13632469.2017.1326420

    Article  Google Scholar 

  • Ezzodin, A., Ghodrati Amiri, G., & Raissi Dehkordi, M. (2022). A random vibration-based simulation model for nonlinear seismic assessment of steel structures subjected to fling-step ground motion records. Journal of Vibration Engineering & Technologies. https://doi.org/10.1007/s42417-022-00509-9

    Article  Google Scholar 

  • FEMA P695. (2009). Quantification of building seismic performance factors. Federal Emergency Management Agency. United States.

  • FEMA P695. (2017). Minimum design loads and associated criteria for buildings and other structures. Federal Emergency Management Agency. United States.

  • Gabbianelli, G., Perrone, D., Brunesi, E., & Monteiro, R. (2022). Seismic acceleration demand and fragility assessment of storage tanks installed in industrial steel moment-resisting frame structures. Soil Dynamics and Earthquake Engineering, 152, 107016. https://doi.org/10.1016/j.soildyn.2021.107016

    Article  Google Scholar 

  • Geramia, M., & Abdollahzadeh, D. (2015). Seismic demand estimation of steel moment resisting frames in near field of fault. Journal of Civil and Environmental Engineering, 45(2), 73–86.

    Google Scholar 

  • Gupta, A., & Krawinkler, H. (1999). Seismic demands for performance evaluation of steel moment resisting frame structures. John A. Blume Earthquake Engrg, Ctr, Rep. No. 132, Dept. of Civ. Engrg, Stanford University, 1999.

  • Gupta, P. K. (2013). Confinement of concrete columns with unplasticized poly-vinyl chloride tubes. International Journal of Advanced Structural Engineering, 5, 19. https://doi.org/10.1186/2008-6695-5-19

    Article  Google Scholar 

  • Ha, D. H., & Koh, H. M. (2000). Earthquake response characteristics of seismically isolated bridges with frictional bearings. KSCE Journal of Civil Engineering, 20, 937–944.

    Google Scholar 

  • Haj Najafi, L., & Teranizadeh, M. (2013). Evaluation of seismic behavior for moment frames and eccentrically braced frames due to near-field ground motions. Asian Journal of Civil Engineering (Building and Housing), 14, 809–830.

    Google Scholar 

  • Hassan, A., & Pal, S. (2018). Effect of soil condition on seismic response of isolated base buildings. International Journal of Advanced Structural Engineering, 10, 249–261. https://doi.org/10.1007/s40091-018-0195-z

    Article  Google Scholar 

  • Ibarra, L. F. (2004). Global collapse of frame structures under seismic excitations. Stanford University.

  • Ibarra, L. F., Medina, R. A., & Krawinkler, H. (2005). Hysteretic models that incorporate strength and stiffness deterioration. Earthquake Engineering and Structural Dynamics, 34, 1489–1511. https://doi.org/10.1002/eqe.495

    Article  Google Scholar 

  • Jahangir, H., Bagheri, M., & Delavari, S. M. J. (2021). Cyclic behavior assessment of steel bar hysteretic dampers using multiple nonlinear regression approach. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45, 1227–1251. https://doi.org/10.1007/s40996-020-00497-4

    Article  Google Scholar 

  • Kalkan, E., & Kunnath, S. K. (2006). Effects of fling step and forward directivity on seismic response of buildings. Earthquake Spectra, 22, 367–390. https://doi.org/10.1193/1.2192560

    Article  Google Scholar 

  • Krawinkler, H., Bertero, V. V., & Popov, E. P. (1971). Inelastic behavior of steel beam-to-column subassemblages. University of California.

    Google Scholar 

  • Lee, J., Liu, Q., & Park, H. J. (2019). Effect of earthquake motion on the permanent displacement of embankment slopes. KSCE Journal of Civil Engineering, 23, 4174–4189. https://doi.org/10.1007/s12205-019-1833-0

    Article  Google Scholar 

  • Liao, W.-I., Loh, C.-H., & Wan, S. (2001). Earthquake responses of RC moment frames subjected to near-fault ground motions. Structural Design of Tall Buildings, 10, 219–229. https://doi.org/10.1002/tal.178

    Article  Google Scholar 

  • Lignos, D. (2008). Sidesway collapse of deteriorating structural systems under seismic excitations. Stanford University.

  • Lignos, D. G., & Krawinkler, H. (2011). Deterioration modeling of steel components in support of collapse prediction of steel moment frames under earthquake loading. Journal of the Structural Engineering. American Society of Civil Engineers, 137, 1291–1302. https://doi.org/10.1061/(asce)st.1943-541x.0000376

    Article  Google Scholar 

  • McKenna, F., Fenves, G. L., & Scott, M. H. (2000). Open system for earthquake engineering simulation. University of California.

    Google Scholar 

  • Pacific Earthquake Engineering Research Center. (2023). PEER Strong Motion Database on Line. Berkley. https://peer.berkeley.edu/peer-strong-ground-motion-databases/.

  • Nabid, N., Hajirasouliha, I., & Petkovski, M. (2021). Simplified method for optimal design of friction damper slip loads by considering near-field and far-field ground motions. Journal of Earthquake Engineering, 25, 1851–1875. https://doi.org/10.1080/13632469.2019.1605316

    Article  Google Scholar 

  • Oh, S.-H., & Kim, J.-C. (2020). Evaluation of the damage distribution of buildings considering the characteristics of far-fault long-period ground motions. Soil Dynamics and Earthquake Engineering, 133, 106–103. https://doi.org/10.1016/j.soildyn.2020.106103

    Article  Google Scholar 

  • Ohtori, Y., Christenson, R. E., Spencer Jr, B. F., & Dyke, S. J. (2004). Benchmark control problems for seismically excited nonlinear buildings. Journal of engineering mechanics, 130(4), 366–385.

  • PEER. (2016). Open system for earthquake engineering simulation: Opensees. University of California (2016). http://www.opensees.berkeley.edu.

  • Pu, X., Wang, L., Wang, P., Tian, X., Xu, S., Chai, S., & Guo, H. (2022). The response law of far-field seismic ground motion of the Wenchuan earthquake and its damaging mechanism in the Loess Plateau. Earthquake Research Advances. https://doi.org/10.1016/j.eqrea.2022.100114

    Article  Google Scholar 

  • Saravanan, M., Goswami, R., & Palani, G. S. (2018). Replaceable fuses in earthquake resistant steel structures: A review. International Journal of Steel Structures, 18, 868–879. https://doi.org/10.1007/s13296-018-0035-9

    Article  Google Scholar 

  • Shen, J., Tsai, M.-H., Chang, K.-C., & Lee, G. C. (2004). Performance of a seismically isolated bridge under near-fault earthquake ground motions. Journal of the Structural Engineering. American Society of Civil Engineers, 130, 861–868. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(861)

    Article  Google Scholar 

  • Soleimani Amiri, F., Ghodrati Amiri, G., & Razeghi, H. (2013). Estimation of seismic demands of steel frames subjected to near-fault earthquakes having forward directivity and comparing with pushover analysis results. The Structural Design of Tall and Special Buildings, 22, 975–988. https://doi.org/10.1002/tal.747

    Article  Google Scholar 

  • Sun, B., Zhang, S., Deng, M., & Wang, C. (2020). Inelastic dynamic response and fragility analysis of arched hydraulic tunnels under as-recorded far-fault and near-fault ground motions. Soil Dynamics and Earthquake Engineering, 132, 106070. https://doi.org/10.1016/j.soildyn.2020.106070

    Article  Google Scholar 

  • Valenzuela-Beltrán, F., Reyes-Salazar, A., Bojórquez, E., Chávez, R., Bojórquez, J., & Llanes-Tizoc, M. D. (2020). Ground motion selection for the evaluation of residual inter-story drifts in moment-resisting reinforced concrete frame buildings. Soil Dynamics and Earthquake Engineering, 136, 106217. https://doi.org/10.1016/j.soildyn.2020.106217

    Article  Google Scholar 

  • Venture, S. J. (2000). State of the art report on systems performance of steel moment frames subject to earthquake ground shaking. SAC Joint Venture.

  • Yahyapour, R., & Seyedpoor, S. M. (2021). Comparing the seismic behavior of various knee braced steel frames based on incremental dynamic analysis and development of fragility curves. International Journal of Steel Structures, 21, 1228–1241. https://doi.org/10.1007/s13296-021-00501-1

    Article  Google Scholar 

  • Zareian, F., & Medina, R. A. (2010). A practical method for proper modeling of structural damping in inelastic plane structural systems. Computers & Structures, 88, 45–53. https://doi.org/10.1016/j.compstruc.2009.08.001

    Article  Google Scholar 

  • Zhang, Y., Ouyang, X., Sun, B., Shi, Y., & Wang, Z. (2022). A comparative study on seismic fragility analysis of RC frame structures with consideration of modeling uncertainty under far-field and near-field ground motion excitation. Bulletin of Earthquake Engineering, 20, 1455–1487. https://doi.org/10.1007/s10518-021-01254-2

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Hamed Saffari.

Ethics declarations

Conflict of Interest

On behalf of all authors, the corresponding author states that there is no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Saffari, H., Zahedi, M.J., Ebrahimpour, N. et al. The Effect of Earthquake Characteristics on the Seismic Performance of Steel Moment Resisting Frames. Int J Steel Struct 23, 1431–1446 (2023). https://doi.org/10.1007/s13296-023-00769-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13296-023-00769-5

Keywords

Navigation