A comparative study of the morphology and physicochemical properties of magnetite synthesized by chemical precipitation for 5 min, 30 min, and 1 h and by thermolysis in nitrogen and hydrocarbon atmospheres was conducted. Regardless of the synthesis method, duration, and atmosphere, the powders were found to have spherical particles, uniform particle size distribution, and ability to agglomerate. The chemical precipitation method produced powders within a narrower size range, specifically up to 56 nm, in contrast to the thermolysis method, characterized by a particle size of up to 84 nm. Gravimetric analysis of the kinetic laws of water vapor adsorption on the synthesized powders in an air flow with a relative humidity ranging from 60 to 100% showed that the adsorption process was most intensive in the initial stage (within 30 min). The adsorption of water vapors and the process speed were significantly influenced by the synthesis method and duration and by the thermolysis atmosphere. Magnetite produced by chemical precipitation exhibited adsorption properties more than an order of magnitude higher than those of the powders produced by thermolysis. This can be attributed not only to the specific surface area but also to the material’s greater affinity for water molecules. A hydrocarbon atmosphere for thermolysis reduced the adsorption properties of magnetite by half compared to nitrogen. This may be associated not only with the potential passivation or catalytic poisoning of the powder surface but also with the influence of the carbon component on the reduction of pore volume and the promotion of magnetite adsorption capacity for polar molecules of the gaseous water phase.
Similar content being viewed by others
References
M.R. Ghazanfari, M. Kashefi, S.F. Shams, and M.R. Jaafari, “Perspective of Fe3O4 nanoparticles role in biomedical applications,” Biochem. Res. Int., 2016, 1–32 (2016).
M.T.H. Bhuiyan, M.N. Chowdhury, and M.S. Parvin, “Potential nanomaterials and their applications in modern medicine: An overview,” ARC J. Cancer Sci., 2, No. 2, 25–33 (2016).
J. Estelrich, E. Escribano, J. Queralt, and M.A. Busquets, “Iron oxide nanoparticles for magnetically-guided and magnetically-responsive drug delivery,” Int. J. Mol. Sci., 16, No. 4, 8070–8101 (2015).
N. Abdullah, Surface Functionalization of Magnetic Nanoparticles Towards Biomedical Applications. Master’s Thesis. School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Australia (2018), p. 105.
K. McNamara and S.A. Tofail, “Nanosystems: The use of nanoalloys, metallic, bimetallic, and magnetic nanoparticles in biomedical applications,” Phys. Chem. Chem. Phys., 17, 27981–27995 (2015).
Y. Liu, W. Zhu, D. Wu, and Q. Wei, “Electrochemical determination of dopamine in the presence of uric acid using palladium-loaded mesoporous Fe3O4 nanoparticles,” Measurement, 60, 1–5 (2015).
S. Sheng-Nan, W. Chao, Z. Zan-Zan, H. Yang-Long, S.S. Venkatraman, and X. Zhi-Chuan, “Magnetic iron oxide nanoparticles: Synthesis and surface coating techniques for biomedical applications,” Chin. Phys., 23, 037503 (2014).
A. Tampieri, T. D’Alessandro, and M. Sandri, “Intrinsic magnetism and hyperthermia in bioactive Fe-doped hydroxyapatite,” Acta Biomater., 8, No. 2, 843–851 (2012).
T. Iwasaki, “Mechanochemical synthesis of magnetite/hydroxyapatite nanocomposites for hyperthermia,” Mater. Sci. Adv. Top., 175–194 (2017).
S. Sprio, S. Panseri, and A. Adamiano, “Porous hydroxyapatite-magnetite composites as carriers for guided bone regeneration,” Front. Nanosci. Nanotech., 3, No. 1, 1–9 (2017).
J. He, H. Hu, and X. Zeng, “A magnetic hydroxyapatite composite scaffold-based magnetic therapy for bone repair: an experimental study in canis lupus familiaris,” Reg. Biomater., 4, No. 2, 97–103 (2017).
A. Synytsia, O. Sych, A. Iatsenko, T. Babutina, T. Tomila, O. Bykov, O. Olifan, T. Lobunets, A. Perekos, and N. Boshytska, “Effect of type and parameters of synthesis on the properties of magnetite nanoparticles,” Appl. Nanosci., 12, 929–937 (2022).
T.E. Babutina and O.M. Otichenko, Method of Producing Nanocomposite Ferromagentic Powder [in Ukrainian], Ukrainian Utility Patent 139699, IPC B22F 9/26 (2006.01), patent hold. Inst. Probl. Materialoznav. NAN Ukrainy, No. u 2019 07794; appl. July 10, 2019; publ. January 10 (2020), Bulletin No. 1.
A.I. Khomenko, and E.V. Khomenko, “Microstructural analysis software package,” Powder Metall. Met. Ceram., 46, No. 1–2, 100–104 (2007).
K.S. Chernyavskii, Stereology in Metallurgical Science [in Russian], Metallurgiya, Moscow (1977), p. 280.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Poroshkova Metallurgiya, Vol. 62, Nos. 3–4 (550), pp. 3–13, 2023.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Synytsia, A.O., Zenkov, V.S., Sych, O.E. et al. Adsorption of Water Vapors on Magnetite Powders Prepared by Chemical Precipitation and Thermolysis Methods. Powder Metall Met Ceram 62, 133–141 (2023). https://doi.org/10.1007/s11106-023-00376-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11106-023-00376-3