Abstract
The dehydration of magnesium-chloride-based fluxes for magnesium alloys is studied by differential scanning calorimetry, thermogravimetric analysis, and IR spectroscopy analysis of the released gases. The results obtained make it possible to choose the temperature–time conditions for drying fluxes so as to ensure uniform mass loss, which reduces the occurrence of structural stresses.
REFERENCES
Magnesium Alloys—Design, Processing and Properties, Czerwinski, F., Ed., IntechOpen, 2011. https://doi.org/10.5772/560
Kablov, E.N., Strategical areas of developing materials and their processing technologies for the period up to 2030, Aviat. Mater. Tekhnol., 2012, no. 5, pp. 7–17. https://journal.viam.ru/en/system/files/uploads/pdf/2012/2012_S_1_1.pdf. Cited March 31, 2023.
Hombergsmeier, E., Magnesium for aerospace applications, Proc. Manchester Sch. Mater., 2010, no.7, p. 13.
Kulekci, M.K., Magnesium and its alloys applications in automotive industry, Int. J. Adv. Manuf. Technol., 2008, vol. 39, pp. 851–865. https://doi.org/10.1007/s00170-007-1279-2
Mostyaev, I.V. and Akinina, M.V., Features and development trends in the field of heat treatment of magnesium alloys, Proc. VIAM, 2018, no. 7, pp. 41–48. https://doi. org/https://doi.org/10.18577/2307-6046-2018-0-7-41-48
Trofimov, N.V., Leonov, A.A., Duyunova, V.A., and Uridiya, Z.P., Casting magnesium alloys, Proc. VIAM, 2016, no. 12, pp. 3–12. https://doi.org/10.18577/2307-6046-2016-0-12-1-1
Kablov, E.N., Volkova, E.F., and Filonova, E.V., Effect of REE on the phase composition and properties of a new refractory magnesium alloy of the Mg–Zn–Zr–REE system, Met. Sci. Heat Treat., 2017, vol. 59, no. 7, pp. 415–421. https://doi.org/10.1007/s11041-017-0165-2
Mukhina, I.Yu., Uridiya, Z.P., and Trofimov, N.V., Corrosion resistant casting magnesium alloys, Aviat. Mater. Tekhnol., 2017, no. 2, pp. 15–23. https://doi.org/10.18577/2071-9140-2017-0-2-15-23
Levchuk, V.V., Trapeznikov, A.V., Pentyukhin, S.I., and Leonov, A.A., Casting methods for a thin-walled part from silumin, Proc. VIAM, 2016, no. 6, pp. 30–38. https://doi.org/10.18577/2307-6046-2018-0-6-30-38
Luo, A.A., Magnesium casting technology for structural applications, J. Magnesium Alloys, 2013, vol. 1, no. 1, pp. 2–22. https://doi.org/10.1016/j.jma.2013.02.002
ASM Specialty Handbook: Magnesium and Magnesium Alloys, Avedesian, M.M., Baker, H., Eds., Materials Park, OH: ASM International, 1999.
Baek, U.-H., Lee, B.-D., Lee, K.-W., Joon, J.-Y., Han, G.-S., and Han, J.-W., Removal of Ca from magnesium melt by flux refining, Mater. Trans., 2016, vol. 57, no. 7, pp. 1156–1164. https://doi.org/10.2320/matertrans.M2015426
Leonov, A.A., Duyunova, V.A., Uridiya, Z.P., and Trofimov, N.V., New universal flaky flux for cast magnesium alloys, Russ. Metall., 2019, vol. 2019, no. 3, pp. 268–272. https://doi.org/10.1134/S003602951903008X
Vyazovkin, S., Burnham, A.K., Criado, J.M., Pérez-Maqueda, L.A., Popescu, C., and Sbirrazzuoli, N., ICTAC kinetics committee recommendations for performing kinetic computations on thermal analysis data, Thermochim. Acta, 2011, vol. 520, nos. 1–2, pp. 1–19. https://doi.org/10.1016/j.tca.2011.03.034
Rycerz, L., Practical remarks concerning phase diagrams determination on the basis of differential scanning calorimetry measurements, J. Therm. Anal. Calorim., 2013, vol. 113, no. 1, pp. 231–238. https://doi.org/10.1007/s10973-013-3097-0
Mohan, G., Venkataraman, M., Gomez-Vidal, J., and Coventry, J., Assessment of a novel ternary eutectic chloride salt for next generation high-temperature sensible heat storage, Energy Convers. Manage., 2018, vol. 167, pp. 156–164. https://doi.org/10.1016/j.enconman.2018.04.100
Nefedov, N.I., Guseva, M.A., Khaskov, M.A., Ignat’eva, L.N., and Buznik, V.M., Peculiarities of temperature behavior of low-molecular fluorooligomers, Polym. Sci., Ser. A, 2017, vol. 59, no. 4, pp. 496–505. https://doi.org / 10.1134 / S0965545X17040034
Baek U.-H., Lee B.-D., Lee K.-W., Yoon J.-Y., Han G.-S., Han J.-W. Removal of Ca from Magnesium Melt by Flux Refining // Materials Transactions. 2016. V. 57. № 7. P. 1156–1164. https://doi.org /10.2320/matertrans. M2015426
Behl, W.K. and Gaur, H.C., Differential thermal analysis of magnesium chloride hydrates, Proc. Natl. Inst. Sci., 1961, vol. 27, pp. 33–37.
Rammelberg H.U., Schmidt T., and Ruck W., Hydration and dehydration of salt hydrates and hydroxides for thermal energy storage–kinetics and energy release, Energy Procedia, 2012, vol. 30, pp. 362–369. https://doi.org/10.1016/j.egypro.2012.11.043
Sina, K.-N., Oxides in the dehydration of magnesium chloride hexahydrate, PhD (Eng.) Thesis, Montreal: McGill Univ., 2005.
Huang, Q., Lu, G., Wang, J., and Yu, J., Thermal decomposition mechanisms of MgCl2 . 6H2O and MgCl2 . H2O, J. Anal. Appl. Pyrolysis, 2011, vol. 91, no. 1, pp. 159–164. https://doi.org/10.1016/j.jaap.2011.02.005
Khaskov M.A., Davydova E.A., Valueva M.I., Shestakov A.M. A Thermokinetic Study of a Polycarbosilane- and Oligovinylsilazane-Based Ceramic- Forming Composition // Inorganic Materials. 2018. V. 54. P. 1162–1167. https://doi.org/10.1134/S0020168518110080
Khaskov, M.A., Shestakov, A.M., Sorokin, O.Yu., and Zelenina, I.V., Synthesis of carbon matrix with tunable carbide formation ability for reactive infiltration techniques, Ceram. Int., 2020, vol. 46, no. 13, pp. 21632–21637. https://doi.org/10.1016/j.ceramint.2020.05.269
Senberber, F.T. and Derun, E.M., Thermal kinetics and thermodynamics of the dehydration reaction of inyoite (Ca2B6O6(OH)10 . 8H2O), Glass Phys. Chem., 2020, vol. 46, no. 1, pp. 64–71. https://doi.org/10.1134/S1087659620010162
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by V. Glyanchenko
Rights and permissions
About this article
Cite this article
Khaskov, M.A., Leonov, A.A., Trofimov, N.V. et al. Choice of Conditions for Drying Fluxes for Magnesium Alloys Based on Thermal Analysis Data. Theor Found Chem Eng 57, 653–659 (2023). https://doi.org/10.1134/S0040579523040164
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040579523040164