Technological aspects of the synthesis of heat-resistant ceramics in the NiO–YSZ system using an oxidizable Ni-based cermet composite, including testing the use of additive synthesis technology to enable the production of items of complex shape, have been studied. The key functional characteristics of the materials were determined based on the results of the synthesis. In particular, oxidation of prototypes was found to be accompanied by a volume increase of the ceramics by ~10%.
Similar content being viewed by others
References
J. A. DiCarlo, H.-M. Yun, G. N. Morscher, and R. T. Bhatt, “SiC/ SiC composites for 1200°C and above,” in: Handbook of Ceramic Composites, N. P. Bansal (ed.), Springer, Boston, MA (2005), pp. 77 – 98; DOI: https://doi.org/10.1007/0-387-23986-3_4.
N. Igawa, T. Taguchi, R. Yamada, et al., “Preparation of silicon-based oxide layer on high-crystalline SiC fiber as an interphase in SiC/SiC composites,” J. Nucl. Mater., 329 – 333, 554 – 557 (2004); DOI: https://doi.org/10.1016/j.jnucmat.2004.04.116.
E. N. Kablov, O. G. Ospennikova, and O. A. Bazyleva, “Materials for high-thermal-load gas-turbine engines,” Vestn. MGTU im. N. E. Baumana, Ser. Mashinostr., 13 – 19 (2011).
E. N. Kablov, V. P. Buntushkin, and O. A. Bazyleva, “Structural heat-resistant materials based on Ni3Al compounds for parts of the hot section gas turbine engines,” Tekhnol. Legk. Splavov, No. 2, 75 – 80 (2007).
S. N. Perevislov, A. S. Lysenkov, D. D. Titov, et al., “Production of ceramic materials based on SiC with low-melting oxide additives,” Glass Ceram., 75(9 – 10), 400 – 407 (2019); DOI: https://doi.org/10.1007/s10717-019-00094-6.
S. N. Perevislov and D. D. Nesmelov, “Properties of SiC and Si3N4 based composite ceramic with nanosize component,” Glass Ceram., 73(7 – 8), 249 – 252 (2016); DOI: https://doi.org/10.1007/s10717-016-9867-y.
S. N. Perevislov, M. A. Markov, E. S. Motailo, et al., “Physical and mechanical properties of composite materials in the MoSi2-SiC-TiB2 system,” IOP Conf. Ser.: Mater. Sci. Eng., 848, Art. 012067 (2020); DOI: https://doi.org/10.1088/1757-899X/848/1/012067.
M. A. Markov, S. S. Ordan’yan, S. V. Vikhman, et al., “Preparation of MoSi2-SiC-ZrB2 structural ceramics by free sintering,” Refract. Ind. Ceram., 60(4), 385 – 388 (2019); DOI: https://doi.org/10.1007/s11148-019-00372-4.
A. D. Bykova, V. V. Semenova, S. N. Perevislov, and M. A. Markov, “Influence of synthesis parameters on density and phase composition of materials based on Ti3SiC2,” Refract. Ind. Ceram., 62, No. 1, 89 – 93 (2021); DOI: https://doi.org/10.1007/s11148-021-00564-x.
S. N. Perevislov,M. A. Markov, A. V. Krasikov, et al., “Effect of SiC dispersed composition on physical and mechanical properties of reaction-sintered silicon carbide,” Refract. Ind. Ceram., 61(2), 211 – 215 (2020); DOI: https://doi.org/10.1007/s11148-020-00458-4.
O. Y. Kurapova, E. N. Solovyeva, I. Y. Archakov, et al., “Enhanced oxidation resistance and microhardness of Ni-YSZ composites via the forging in air,” Rev. Adv. Mater. Sci., 55(1 – 2), 118 – 123 (2018); DOI: https://doi.org/10.1515/rams-2018-0034.
O. Y. Kurapova, K. V. Nikiforova, V. G. Konakov, et al., “Sensor properties of stabilized zirconia ceramics, manufactured from nanopowders,” Rev. Adv. Mater. Sci., 57(2), 257 – 261 (2018); DOI: https://doi.org/10.1515/rams-2018-0071.
V. G. Konakov, O. Yu. Kurapova, and S. N. Golubev, “Method of producing nanoscale powder of stabilized zirconium dioxide,” RU Pat. 2,600,400, Oct. 20, 2016.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 3, pp. 26 – 31, March, 2023
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Markov, M.A., Belyakov, A.N., Bykova, A.D. et al. Technological Features of the Synthesis of Heat-Resistant Ceramics in the NiO–YSZ System with the Possibility of Using Additive Technology. Refract Ind Ceram 64, 131–135 (2023). https://doi.org/10.1007/s11148-023-00815-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-023-00815-z