The physicochemical and thermophysical properties and phase composition of heat-resistant ceramic materials synthesized based on the Al2O3–SiO2–TiO2 system were studied. The influence of modifying additives such as RO2 (ZrO2, SnO2, CeO2, and MnO2) on the sintering and phase formation processes of ceramic materials was studied. Samples of mullite-thialite ceramics modified with SnO2 and CeO2 in the amounts of 5% and 7.5%, respectively, were characterized by water absorption from 0.2 to 2.2% and CLTE in the range 2.4 × 10–6 – 3.2 × 10–6 K–1. The developed materials could withstand greater than 70 heating and cooling cycles and could be used to work under conditions of sudden temperature changes.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
N. M. Bobkova, Physical Chemistry of Refractory Nonmetallic and Silicate Materials [in Russian], Vysshaya Shkola, Minsk, 2007, 301 pp.
N. A. Toropov, et al. (eds.), Phase Diagrams of Silicate Systems. Ternary Silicate Systems: Handbook [in Russian], Nauka, Leningrad, 1972, 448 pp.
S. A. Suvorov, V. N. Fishchev, and A. N. Ignat’eva, Ogneupory Tekh. Keram., No. 3, 3 – 9 (2013).
N. V. Arbuzova and S. A. Suvorov, Traditions and Innovations: Proceedings of a Scientific Conference Dedicated to the 187th Anniversary of the Founding of St. Petersburg State Technological Institute (Technical University) [in Russian], Izd. SPbGTI (TU), St. Petersburg, 2015, p. 82.
F. H. Perera, A. Pajares, and J. J. Melendez, “Strength of aluminium titanate/mullite composites containing thermal stabilizers,” J. Eur. Ceram. Soc., 31(9), 1695 – 1701 (2011); https://doi.org/10.1016/j.jeurceramsoc.2011.03.012.
C. C. Guedes-Silva, F. M. de Souza Carvalho, Th. dos Santos Ferreira, and L. A. Genova, “Formation of aluminum titanate with small additions of MgO and SiO2,” Mater. Res., 19, 384 – 388 (2016); https://doi.org/10.1590/1980-5373-MR-2015-0498.
N. M. Bobkova and L. N. Silich, “Heat-resistant ceramic and glass-ceramic based on aluminum titanate,” Zh. Vses. Khim. O’va im. D. I. Mendeleeva, 36(5), 564 – 569 (1991).
N. M. Bobkova, E. M. Dyatlova, and T. N. Yurkevich, “Investigation of sintering of refractory materials based on the Al2O3–SiO2–TiO2 system,” Steklo, Sitally Silik., No. 13, 87 – 92 (1984).
N. M. Bobkova, et al., “Effect of sintering temperature on mineral formation and some properties of materials in the Al2O3–SiO2–TiO2 system,” Steklo, Sitally Silik., No. 12, 74 – 77 (1984).
A. T. Volochko, K. B. Podbolotov, and E. M. Dyatlova, Refractory and High-Melting Ceramic Materials [in Russian], Belarus. Navuka, Minsk, 2013, 385 pp.
Ya. E. Geguzin, Physics of Sintering [in Russian], Nauka, Moscow, 1984, 312 pp.
A. G. Evans and T. G. Langdon, “Structural ceramics,” Prog. Mater. Sci., 21, 171 – 441 (1976) [Russian translation, Metallurgiya, Moscow, 1980, 256 pp].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 4, pp. 9 – 15, April, 2023.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Popov, R.Y., Sergievich, O.A., Kolontaeva, T.V. et al. Synthesis and Research of Mullite-Thialite Ceramics Modified with Oxides of the RO2 Type. Refract Ind Ceram 64, 174–179 (2023). https://doi.org/10.1007/s11148-023-00821-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-023-00821-1