Abstract
Effect of cavitation phenomenon on changes in pressure and flow rate of water in a chamber is studied. The contribution of the gas saturation of liquid to changes in the hydrodynamic characteristics of a model cavitation flow are analyzed.
Similar content being viewed by others
REFERENCES
Kurnikov, A.S., Misgirev, D.S., and Cherepkova, E.A., Calculation of a hydrodynamic cavitator with a toroidal mixing chamber, Vestn. Gos. Univ. Morsk. Rechn. Flota, 2015, no. 4, p. 60.
Kravtsova, A.Yu., Cand. Sci. (Phys.–Math.) Dissertation, Novosibirsk: Institute of Thermal Physics, Siberian Branch, Russian Academy of Sciences, 2018.
Badve, M.P., Bhagat, M.N., and Pandit, A.B., Microbial disinfection of seawater using hydrodynamic cavitation, Sep. Purif. Technol., 2015, vol. 151, p. 31. 10.1016/j.seppur.2015.07.020
Capocelli, M., Prisciandaro, M., Lancia, A., and Musmarra, D., Hydrodynamic cavitation of p-nitrophenol: A theoretical and experimental insight, Chem. Eng. J., 2014, vol. 254, p. 1.
Patehebieke, Y., Zhao, Z.-R., Wang, S., Xu, H.-X., Chen, Q.-Q., and Wang, X., Cavitation as a plausible driving force for the prebiotic formation of N 9 purine nucleosides, Cell Rep. Phys. Sci., 2021, vol. 2, p. 100375. https://doi.org/10.1016/j.xcrp.2021.100375
Alves, D.S., Wu, M.F., and Cavalca, K.L., Application of gain-scheduled vibration control to nonlinear journal-bearing supported rotor, J. Sound Vib., 2019, vol. 442, p. 714. https://doi.org/10.1016/j.jsv.2018.11.027
Shrikant, B.R. and Khambete, A.K., Hydrodynamic cavitation: A novel treatment approach, Mater. Today: Proc., 2017, vol. 4, p. 9680. https://doi.org/10.1016/j.matpr.2017.06.246
Singh, S. and Randhavane, S., Hydrodynamic cavitation: its optimization and potential application in treatment of pigment industry wastewater. Treatment approach, Mater. Today: Proc., 2022, vol. 61, p. 523. https://doi.org/10.1016/j.matpr.2022.01.261
Wang, X.-L. and Zhu, K.-Q., Numerical analysis of journal bearings lubricated with micropolar fluids including thermal and cavitating effects, Tribol. Int., 2006, vol. 39, p. 227. https://doi.org/10.1016/j.triboint.2005.01.028
Jang, J.Y. and Khonsari, M.M., Performance and characterization of dynamically-loaded engine bearings with provision for misalignment, Tribol. Int., 2019, vol. 130, p. 387. https://doi.org/10.1016/j.triboint.2018.10.003
Kango, S., Sharma, R.K., and Pandey, R.K., Thermal analysis of microtextured journal bearing using non-Newtonian rheology of lubricant and JFO boundary conditions, Tribol. Int., 2014, vol. 69, p. 19.https://doi.org/10.1016/j.triboint.2013.08.009
Bogus, A.M., Doctoral (Eng.) Dissertation, Krasnodar: Krasnodar Research Institute for Storage of Agricultural Products, 2007.
Ramos, D.J. and Daniel, D.B., Evaluation of bearing’s cavitation effects on the rotor dynamic behavior, Appl. Math. Model., 2020, vol. 77, p. 49. https://doi.org/10.1016/j.apm.2019.07.026
Kunz, R.F., Boger, D.A., Stinebring, D.R., Chyczewski, T.S., Lindau, J.W., Gibeling, H.J., Venkateswaran, S., and Govindan, T.R., A preconditioned Navier–Stokes method for two-phase flows with application to cavitation prediction, Comput. Fluids, 2000, vol. 29, p. 849. https://doi.org/10.1016/S0045-7930(99)00039-0
Tseng, C.-C. and Wang, L.-J., Investigations of empirical coefficients of cavitation and turbulence model through steady and unsteady turbulent cavitating flows, Comput. Fluids, 2014, vol. 103, p. 262.https://doi.org/10.1016/j.compfluid.2014.07.026
Savenko, A.V., MSc Thesis, Krasnoyarks: Sib. Federal Univ., 2018.
Splavskii, I.S. and Kulakov, O.I., Methods for enhancing the tribological properties of thrust sliding bearings, XXXII Mezhdunarodnaya innovatsionnaya konferentsiya molodykh uchenykh i studentov po problemam mashinovedeniya. Sbornik trudov konferentsi (Proceedings of the 32nd International Innovation Conference of Young Scientists and Students on Problems of Mechanical Engineering), Moscow: Inst. Mashinovedeniya Ross. Akad. Nauk, 2020, p. 241.
Cheremisinov, E.M. and Splavskii, I.S., Testing procedure for the tribological properties of axial bearings, J. Mach. Manuf. Reliab., 2023, vol. 52, no. 3, pp. 281–285.https://doi.org/10.3103/S1052618823020024
Tereshchuk, V.S., Primenenie energeticheski aktivnykh metallov i vodoroda (Application of Energetically Active Metals and Hydrogen), Moscow: Innovatsionnoe Mashinostr., 2019.
Kolesnikov, V.V., Lezhebokov, A.V., and Pushkarev, A.E., Experimental studies of the characteristics of nozzles, Izv. Tul’sk. Gos. Univ. Tekh. Nauki, 2013, no. 4, p. 211.,
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by M. Shmatikov
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Splavskiy, I.S. Study of the Influence of Gas Saturation of Liquid on the Change of Pressure and Water Flow in a Chamber. J. Mach. Manuf. Reliab. 52, 579–584 (2023). https://doi.org/10.1134/S105261882306016X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S105261882306016X