Abstract
The relevance of the use of lubricating oil containing carbon nanotubes during the deposition process has been shown. The technique of experimental studies during deposition of cylindrical blanks has been described. Tests were carried out during deformation of the samples printed on a 3D printer. As a result of this experimental study, it has been shown that the introduction of carbon nanotubes into engine oil reduces the friction coefficient.
Similar content being viewed by others
REFERENCES
Podskrebko, M.D., Soprotivlenie materialov (Strength of Materials), Minsk: Vysshaya Shkola, 2007.
Vorontsov, A.L., Free upsetting of hollow cylindrical workpieces, Sprav. Inzh. Zh. Prilozheniem, 2006, no. 11, pp. 21–31.
Kuchar, V.D. and Boyko, O.A., Influence of the friction on upsetting force in cylindrical workpieces, Izv. Tul. Gos. Univ. Tekh. Nauki, 2012, no. 8, pp. 239–242.
Semenov, E.I., Kovka i shtampovka (Forging and Stamping), Moscow: Mashinostroenie, 1986, vol. 2.
Dmitriev, A.M. and Vorontsov, A.L., General theory of upsetting and flange forming in cylindrical workpieces. Part 1: Flange forming, Vestn. Mosk. Gos. Tekh. Univ. Baumana Ser. Mashinostr., 2004, no. 1, pp. 82–103.
Strugov, S.S., Ivanov, V.A., and Sherkunov, V.G., Comparison of methods for estimating the stress-strain state at upsetting of cylindrical workpiece, Vestn. Yuzhno-Ural. Gos. Univ., 2016, vol. 16, no. 4, p. 140.
Gun, G.Ya., Teoreticheskie osnovy obrabotki metallov davleniem (Theoretical Foundations of Metal Forming), Moscow: Metallurgiya, 1980.
Kolmogorov, V.L., Mekhanika obrabotki metallov davleniem (Mechanics of Metal Forming), Yekaterinburg: Ural. Gos. Tekh. Univ.–Ural. Politekh. Inst., 2001.
Rudenkov, A.S. and Yarmolenko, M.A., Carbon nanotubes: Classification, features of synthesis, research methods and applications, Probl. Fiz., Mat. Tekh., 2019, no. 2, pp. 7–14.
Kong, J., Franklin, N.R., Zhou, Ch., Chapline, M.G., Peng, Sh., Cho, K., and Dai, H., Nanotube molecular wires as chemical sensors, Science, 2000, vol. 287, pp. 622–625. https://doi.org/10.1126/science.287.5453.622
Volder, M.F.L., Tawfick, S.H., Baughman, R.H., and Hart, A.J., Carbon nanotubes: Present and future commercial applications, Science, 2013, vol. 339, pp. 535–539. https://doi.org/10.1126/science.1222453
Sun, D., Timmermans, M.Y., Tian, Yi., Nasibulin, A.G., Kauppinen, E.I., Kishimoto, Sh., Mizutani, T., and Ohno, Yu., Flexible high-performance carbon nanotube integrated circuits, Nat. Nanotechnol., 2011, vol. 6, pp. 156–161. https://doi.org/10.1038/nnano.2011.1
Grudev, A.P., Vneshnee trenie pri prokatke (External Friction at Rolling), Moscow: Metallurgiya, 1973.
Myshechkin, A.A., Knyazev, Ya.O., Skripnik, S.V., and Ural’skii, A.E., Simulation study in QFORM software of force parameters and friction conditions in processes of hot forming, Fundamental’nye issledovaniya i innovatsionnye tekhnologii v mashinostroenii. Nauchnye trudy VII Mezhdunarodnoi nauchnoi konferentsii (Fundamental Studies and Innovative Technologies in Mechanical Engineering: Proc. 7th Int. Sci. Conf.), Moscow: 2021, p. 178.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by Sh. Galyaltdinov
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Albagachiev, A.Y., Tokhmetova, A.B. & Skripnik, S.V. The Efficiency of Engine Oil Containing Carbon Nanotubes during the Deposition Process. J. Mach. Manuf. Reliab. 52, 807–811 (2023). https://doi.org/10.1134/S1052618823070026
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1052618823070026