Abstract
When applying a vacuum-arc discharge plasma coating to profilecomposite items, such as twin turbine blades, unicycle blades, etc., a problem might occur with ensuring the tolerance on the coating thickness. This article presents the obtained dependence of the nonuniformity of the coating thickness on the geometric parameters of the inter-blade channel—its length and width. We develop a simulation model for calculating the distribution of the thickness of the vacuum-arc discharge plasma coating for the profilecomposite parts having shadow zones.
Similar content being viewed by others
REFERENCES
Lakhin, A.M., Synthesis of process-engineering provision of functionally oriented properties of working elements in gears on the basis of coating deposition methods, Progresivni Tekhnologiï Sistemi Mashinnobuduvannya, 2014, nos. 3–4, pp. 101–107.
Abdoos, M., Yamamoto, K., Bose, B., Fox-Rabinovich, G., and Veldhuis, S., Effect of coating thickness on the tool wear performance of low stress TiAlN PVD coating during turning of compacted graphite iron (CGI), Wear, 2019, vols. 422–423, pp. 128–136. https://doi.org/10.1016/j.wear.2019.01.062
Rodgers, T.M., Zhao, H., and Wadley, H.N.G., Vapor deposition on doublet airfoil substrates: Coating thickness control, J. Vac. Sci. Technol. A: Vac., Surf., Films, 2015, vol. 33, no. 6, p. 061509. https://doi.org/10.1116/1.4929664
Baranov, O.O. and Kostyuk, G.I., Deposition of high-quality equally thick electric-arc coating on cemented carbide cutting tools at large-scale processing, Visnik Nats. Tekh. Univ. Kharkovsk. Politekh. Inst., 2015, no. 40, pp. 85–89.
Anders, A., Cathodic Arcs: From Fractal Spots to Energetic Condensation, Springer Series on Atomic, Optical, and Plasma Physics, vol. 50, New York: Springer, 2008. https://doi.org/10.1007/978-0-387-79108-1
He, G., Sun, D., Chen, J., Han, X., Zhang, Z., Fang, Z., Yang, L., and Yang, Z., Key problems affecting the anti-erosion coating performance of aero-engine compressor: A review, Coatings, 2019, vol. 9, no. 12, p. 821. https://doi.org/10.3390/coatings9120821
Yagafarov, I.I., Technological means for assuring high quality of surface layer and accurayc of high-precision machine elements at deposition of coating from vacuum electric-arc discharge plasma, Cand. Sci. (Eng.) Dissertation, Ufa: Ufa State Aviation Technical University, 2014.
Funding
This work was supported by the Russian Ministry for Science and Education, project no. 075-15-2021-1348.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by I. Dikhter
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Oleinik, A.V., Ramazanov, K.N. Dependence of the Nonuniformity of Thickness of the Vacuum-Arc Discharge Plasma Coating on the Geometric Parameters of the Inter-Blade Channel. J. Mach. Manuf. Reliab. 52, 870–876 (2023). https://doi.org/10.1134/S1052618823080137
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1052618823080137