Abstract
The development of polymeric biomaterials as drug delivery vehicles has now become vital to control the growth of cancerous cells and microbial infections during and after chemotherapy. Herein, the article reports the fabrication of polycaprolactone-gelatin blend membranes along with hydroxymethyl cellulose and polyethylene glycol for the eradication of cancer cells and microbial strains together through controlled delivery of 5-fluorouracil (5Fu) drug. The chemical interactions, crosslinking and the structural establishment of the polymer blends were studied by FTIR spectroscopy. The surface nature and its porosity responsible for drug diffusion from the membranes were examined by scanning electron microscopy. Surface and bulk hydrophilicity of the membranes were tested by contact angle measurements and swelling behavior which showed hydrophilic nature by the addition of natural and hydrophilic polymers. Tensile strength of the membranes was identified by mechanical property studies and the results were found challenging. Nearly, 95% of the 5Fu drug has been successfully loaded to the membranes and the drug has been diffused in a controlled manner. Cytotoxicity results reveal that the membranes exhibited cell viability of 80% against fibroblast cell line (L929) and the anticancer activity resulted with ~ 74% against breast cancer cell line (MDA-MB-231). The membranes followed zero-order drug release kinetics and obeyed Higuchi and Korsmeyer-Peppas models. In addition, the membranes showed excellent growth resistance property against the selected bacterial and fungal strains. Compared to the bare membrane, the blend membranes showed faster degradation with > 75%. In a nut shell, the obtained results clearly reveal that the fabricated membranes would be a potent drug delivery vehicle for the treatment of breast cancer cells and post-surgical microbial infections.
Graphical abstract
Similar content being viewed by others
References
Sung YK, Kim SW (2020) Recent advances in polymeric drug delivery systems. Biomater Res 24:12
Bhatt P, Trehan S, Inamdar N, Mourya VK, Misra A (2021) Polymers in drug delivery: an update, applications of polymers in drug delivery, 2nd edn. Elsevier, Amsterdam
Ulbrich K, Holá K, Šubr V, Bakandritsos A, Tuček J, Zbořil R (2016) Targeted drug delivery with polymers and magnetic nanoparticles: covalent and noncovalent approaches, release control, and clinical studies. Chem Rev 116:5338–5431
Vaddiraju S, Wang Y, Qiang L, Burgess DJ, Papadimitrakopoulos F (2012) Microsphere erosion in outer hydrogel membranes creating macroscopic porosity to counter biofouling-induced sensor degradation. Anal Chem 84(20):8837–8845
Bohr A, Kristensen J, Stride E, Dyas M, Edirisinghe M (2011) Preparation of microspheres containing low solubility drug compound by electrohydrodynamic spraying. Int J Pharm 412:59–67
Shen J, Burgess DJ (2013) In vitro dissolution testing strategies for nanoparticulate drug delivery systems: recent developments and challenges. Drug Deliv Transl Res 3:409–415
Wang Y, Yamada T, Tanaka I, Iye M, Ji T (2012) Adaptive optics imaging of QSO UM402 field. Proc Int Astron Union 8:195–195
Gu B, Burgess JD (2014) Polymeric materials in drug delivery: natural and synthetic biomedical polymers. Elsevier, Amsterdam
Ghasemiyeh P, Mohammadi-Samani S (2021) Polymers blending as release modulating tool in drug delivery. Front Mater 8:752813
Ghasemiyeh P, Mohammadi-Samani S (2020) Potential of nanoparticles as permeation enhancers and targeted delivery options for skin: advantages and disadvantages. Drug Des Devel Ther 14:3271–3289
Zhang Z, Tsai PC, Ramezanli T, Michniak-Kohn BB (2013) Polymeric nanoparticles-based topical delivery systems for the treatment of dermatological diseases. WIREs Nanomed Nanobiotechnol 5:205–218
Chang SH, Lee HJ, Park S, Kim Y, Jeong B (2018) Fast degradable polycaprolactone for drug delivery. Biomacromol 19:2302–2307
Pavithra ME, Jayaraman R, Azarudeen RS, Thirumarimurugan M (2023) Casting hydrophilic polymers blended polycaprolactone membranes for drug delivery to eradicate the cancer cells and pathogenic microorganisms. Polym Adv Technol 34:1231–1244
Woodruff MA, Hutmacher DW (2010) The return of a forgotten polymer-polycaprolactonein the 21stcentury. Prog Polym Sci 35:1217–1256
Gheysoori P, Paydayesh A, Jafari M, Peidayesh H (2023) Thermoresponsive nanocomposite hydrogels based on gelatin/poly (N-isopropylacrylamide) (PNIPAM) for controlled drug delivery. Eur Polym J 186:111846
Gullapalli RP, Mazzitelli CL (2017) Gelatin and non-gelatin capsule dosage forms. J Pharm Sci 106:1453–1465
Verhoef JJ, Anchordoquy TJ (2013) Questioning the use of PEGylation for drug delivery. Drug Deliv Transl Res 3:499–503
Shi L, Zhang J, Zhao M, Tang S, Cheng X, Zhang W, Li W, Liu X, Peng H, Wang Q (2021) Effects of polyethylene glycol on the surface of nanoparticles for targeted drug delivery. Nanoscale 13:10748–10764
Bashir S, Zafar N, Lebaz N, Mahmood A, Elaissari A (2020) Hydroxypropyl methylcellulose-based hydrogel copolymeric for controlled delivery of galantamine hydrobromide in Dementia. Processes 8:1350
Borbolla-Jiménez FV, Peña-Corona SI, Farah SJ, Jiménez-Valdés MT, Pineda-Pérez E, Romero-Montero A, Del Prado-Audelo ML, Bernal-Chávez SA, Magaña JJ, Leyva-Gómez G (2023) Films for wound healing fabricated using a solvent casting technique. Pharmaceutics 15:1914
Samy M, Ekram B, Abd El-Hady BM, Ayoub MMH (2023) In vitro release study of electrospun poly(ε-caprolactone)/gelatin nanofiber mats loaded with 5-fluorouracil. Polym Bull 4:1–20
Jaisankar E, Pavithra ME, Krishna S, Thirumarimurugan M, Azarudeen RS (2020) Dual property of chitosan blended copolymer membranes: antidiabetic drug release profile and antimicrobial assay. Int J Biol Macromol 145:42–52
Cerrone F, Pozner T, Siddiqui A, Ceppi P, Winner B, Rajendiran M, Babu R, Ibrahim HS, Rodriguez BJ, Winkler J, Murphy KJ, O’Conner KE (2020) Polyhydroxyphenylvalerate/polycaprolactone nanofibers improve the life-span and mechanoresponse of human IPSC-derived cortical neuronal cells. Mater Sci Eng C 111:110832
Kahdim QS, Abdelmoula N, Al-Karagoly H, Albukhaty S, Al-Saaidi J (2023) Fabrication of a polycaprolactone/chitosan nanofibrous scaffold loaded with nigella sativa extract for biomedical applications. Bio Tech 12:19
Ghadermazi R, Hamdipour S, Sadeghi K, Ghadermazi R, Asl AK (2019) Effect of various additives on the properties of the films and coatings derived from hydroxypropyl methylcellulose: A review. Food Sci Nutr 7:3363–3377
Rekik SB, Gassara S, Deratani A (2023) Green fabrication of sustainable porous chitosan/kaolin composite membranes using polyethylene glycol as a porogen: membrane morphology and properties. Membranes 13:378
Montoya-Ospina MC, Verhoogt H, Ordner M, Tan X, Osswald TA (2022) Effect of cross-linking on the mechanical properties, degree of crystallinity and thermal stability of polyethylene vitrimers. Polym Eng Sci 62:4203
Mitra T, Sailakshmi G, Gnanamani A (2014) Could glutaric acid (GA) replace glutaraldehyde in the preparation of biocompatible biopolymers with high mechanical and thermal properties? J Chem Sci 126:127–140
Athanasoulia IG, Tarantili PA (2017) Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends. Pure Appl Chem 89:141–152
Rizwan M, Yahya R, Hassan A, Yar M, Azzahari AD, Selvanathan V, Sonsudin F, Abouloula CN (2017) pH Sensitive hydrogels in drug delivery: Brief history, properties, swelling, and release mechanism, material selection and applications. Polymers 9:137
Samy M, Abd El-Alim SH, Rabia AEG, Amin A, Ayoub MMH (2020) Formulation, characterization and in vitro release study of 5-fluorouracil loaded chitosan nanoparticles. Int J Biol Macromol 156:783–791
Zhang J, Yang W, Vo AQ, Feng X, Ye X, Kim DW, Repka MA (2017) Hydroxypropyl methylcellulose-based controlled release dosage by melt extrusion and 3D printing: structure and drug release correlation. Carbohydr Polym 177:49–57
Kanamaru T, Sakurai K, Fujii S (2022) Impact of polyethylene glycol (peg) conformations on the in vivo fate and drug release behavior of PEGylated core-cross-linked polymeric nanoparticles. Biomacromol 23:3909–3918
Kuo WT, Huang JY, Chen MH, Chen CY, Shyong YJ, Yen KC, Lin FH (2016) Development of gelatin nanoparticles conjugated with phytohemagglutinin erythroagglutinating loaded with gemcitabine for inducing apoptosis in non-small cell lung cancer cells. J Mater Chem B4:2444–2454
Mahajan SN, Shah JN, Hachem R, Tverdek F, Adachi JA, Mulanovich V, Rolston KV, Raad II, Chemaly RF (2012) Characteristics and outcomes of methicillin-resistant staphylococcus aureus bloodstream infections in patients with cancer treated with vancomycin: 9-year experience at a comprehensive cancer center. Oncologist 17:1329–1336
Rosa RG, Dos Santos RP, Goldani LZ (2014) Mortality related to coagulase-negative staphylococcal bacteremia in febrile neutropenia: a cohort study. Can J Infect Dis Med Microbiol 25:14–27
Michels R, Last K, Becker SL, Papan C (2021) Update on coagulase-negative staphylococci-what the clinician should know. Microorganisms 9:830
Bai C, Zhang X, Yang D, Li D, Feng H, Li Y (2022) Clinical analysis of bloodstream infection of Escherichia coli in patients with pancreatic cancer from 2011 to 2019. Can J Infect Dis Med Microbiol 16:1338188
Paprocka P, Durnaś B, Mańkowska A, Król G, Wollny T, Bucki R (2022) Pseudomonas aeruginosa infections in cancer patients. Pathogens 11:679
Ding L, Yang Z, Lu J, Ma L, Liu Y, Wu X, Yao W, Zhang X, Zhu K (2020) Characterization of phenotypic and genotypic traits of Klebsiella pneumoniae from lung cancer patients with respiratory infection. Infect Drug Resist 13:237–245
Lin L, Zhao CH, Yin XY, Chen YL, Zhai HY, Xu CW, Wang Y, Ge FJ, Xu JM (2017) Aspergillus niger bloodstream infection in gastric cancer after common hepatic artery embolization: a case report. Exp Ther Med 14:1427–1432
Zhang H, Zhou L, Zhang W (2014) Control of scaffold degradation in tissue engineering a review. Tissue Eng B20(20):492–502
Pang JH, Wischke C, Lendlein A (2019) In vitro degradation analysis of 3d-architectured gelatin-based hydrogels. MRS Adv 5:633–642
Acknowledgements
The authors thank the Management and Principal of KMCH College of Allied Health Science, Dr. N.G.P. Arts and Science College and Coimbatore Institute of Technology (CIT), Coimbatore, India for their constant support and encouragement. The authors are thankful to the Researcher Supporting Project No. RSP2024R148, of King Saud University, Riyadh, Saudi Arabia for the financial support.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interests
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this article.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Pavithra, M.E., Rengaramanujam, J., Azarudeen, R.S. et al. Controlled drug release from the polycaprolactone-gelatin blend membranes for cancer therapy and microbial strains growth inhibition. Iran Polym J 33, 629–645 (2024). https://doi.org/10.1007/s13726-023-01274-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13726-023-01274-6