Abstract
Based on the solution of the Fourier heat equations in partial derivatives, analytical models to calculate temperature during friction and impact are derived. The calculations performed demonstrated the adequacy of the models for the experimental data. Models of the coefficient for sharing the heat flow are reviewed.
This is a preview of subscription content, log in via an institution to check access.
REFERENCES
Holmberg, K., Kivikytö-Reponen, P., Härkisaari, P., Valtonen, K., and Erdemir, A., Global energy consumption due to friction and wear in the mining industry, Tribol. Int., 2017, vol. 115, pp. 116–139. https://doi.org/10.1016/j.triboint.2017.05.010
Gorbatyuk, S.M., Gerasimova, A.A., and Radyuk, A.G., Using the coating for the diffusion layer obtaining on the walls of the mold (CCM), Metall. Min. Ind., 2015, vol. 7, no. 9, pp. 1085–1088.
Artiukh, V., Mazur, V., and Adamtsevich, A., Priority influence of horizontal forces at rolling on operation of main sheet rolling equipment, MATEC Web Conf., 2017, vol. 106, p. 04001. https://doi.org/10.1051/matecconf/201710604001
O’Halloran, S.M., Connaire, A.D., Harte, A.M., and Leen, S.B., A global-local fretting analysis methodology and design study for the pressure armour layer of dynamic flexible marine risers, Tribol. Int., 2020, vol. 142, p. 105967. https://doi.org/10.1016/j.triboint.2019.105967
Sun, Sh., Li, L., Yue, Zh., Yang, W., He, K., and Li, S., Fretting fatigue failure behavior of Nickel-based single crystal uperalloy dovetail specimen in contact with powder metallurgy pads at high temperature, Tribol. Int., 2020, vol. 142, p. 105986. https://doi.org/10.1016/j.triboint.2019.105986
De Mello, J.D.B., Binder, C., Hammes, G., Binder, R., and Klein, A.N., Tribological behaviour of sintered iron based self-lubricating composites, Friction, 2017, vol. 5, pp. 285–307. https://doi.org/10.1007/s40544-017-0186-2
Shchedrov, V.S., Temperature calculation at sliding contact, Trenie i iznos v mashinakh (Friction and Wear in Machines), 1955: Izd-vo Akad. Nauk SSSR, 1955, vol. 10, p. 336.
Chichinadze, A.V., Raschet i issledovanie vneshnego treniya pri tormozhenii (Calculation and Study of External Friction at Braking), Moscow: Nauka, 1967.
Ainbinder, S.B., Dzenis, A.A., and Tyunina, E.L., Calculation of the temperature of a metal—Polymer pair under severe friction regimes, Polym. Mech., 1978, vol. 14, no. 4, pp. 543–546. https://doi.org/10.1007/bf00860489
Cherskii, I.N., Polimernye materialy v sovremennoi uplotnitel’noi tekhnike (Polymer Materials in Modern Sealing Engineering), Yakutsk: Yakutskoe Knizhnoe Izd-vo, 1975.
Carslaw, H.S. and Jaeger, J.C., Conduction of Heat in Solids, Oxford: Clarendon Press, 1959, 2nd ed.
Myshkin, N.K. and Petrokovets, M.I., Trenie, smazka, iznos (Friction, Lubrication, and Wear), Moscow: Fizmatlit, 2007.
Albagachiev, A.Yu. and Zuev, V.V., Effektivnye tekhnologicheskie metody obespecheniya kachestva detalei mashin (Efficient Technological Methods for Quality Assurance of Machine Elements), Moscow: Apollon Print, 2013.
Funding
This work was supported in part by subsidy agreement no. 075-11-2021-034, dated June 24, 2021.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by M. Astrov
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Albagachiev, A.Y., Gantimirov, B.M. Thermophysical Models of Temperature during Friction and Impact. J. Mach. Manuf. Reliab. 52 (Suppl 2), S109–S113 (2023). https://doi.org/10.1134/S1052618823100023
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1052618823100023