Abstract
With the advantages of high flexibility, high safety, and good adhesion and wrapping, soft robots have a wide range of application prospects in complex environments such as automatic production lines and medical surgery. By coupling an active pneumatic drive structure and an interference variable stiffness mechanism, this paper designs a soft robot based on a variable stiffness pneumatic actuator. Based on kinematic analysis and finite element simulation based on the segmented constant curvature method, the Lagrange equations are applied to perform dynamic analysis, which in turn verifies the variable stiffness performance and bending performance of the variable-stiffness soft robotic arm. The soft manipulator adopts the structural design based on 2 mm thickness, jamming mechanism and coupling fiber layer, which can effectively resist 0–2.5 N force without large deviation and be adjustable in the stiffness range of (0.025–0.12) N/mm, under the condition that the vacuum degree does not exceed 80 kPa. The stiff stiffness and bending behavior of the proposed soft manipulator show excellent performance and can be applied to industrial automation, medical devices and other operations.
Similar content being viewed by others
Data availability
The data underlying this article will be shared on reasonable request to the corresponding author.
References
Chen, Z., Nohooji, H.R., Chew, C.-M.: Development of topology optimized bending-twisting soft finger. J. Mech. Robot. 14(5), 051003 (2022). https://doi.org/10.1115/1.4053159
Fitzgerald, S.G., Delaney, G.W., Howard, D.: A review of jamming actuation in soft robotics. Actuators 9(4), 104 (2020). https://doi.org/10.3390/act9040104
Huynh, H.H., Han, D., Yoshida, K., et al.: Soft actuator with switchable stiffness using a micropump-activated jamming system. Sens. Actuat. A 338, 113449 (2022). https://doi.org/10.1016/j.sna.2022.113449
Kang, R.J., David, T.B.: Dynamic modeling and control of an octopus inspired multiple continuum arm robot. Comput. Math. Appl.. Math. Appl. 64, 1004–1016 (2012). https://doi.org/10.1016/j.camwa.2012.03.018
Kapadia, A., Walker, I.D.: Task-space control of extensible continuum manipulators. IEEE/RS J. Int. Conf. Intel. Robots Syst. (2011). https://doi.org/10.1109/IROS.2011.6094873
Li, J., Guo, Y., Wang, Z.: A bionic jellyfish robot propelled by bio-tentacle propulsors actuated by shape memory alloy wires. J. Harbin Inst. Technol. 46 104–110 (2014). https://kns.cnki.net/kcms2/article/abstract?v=JhihgkH6Nr9TmeHxPBWvpm8u47c6QP_l9tQqPk7GFwpmRai6Btv7J7fonxQr7fC8ayw5bl1G5JLZTCZ7aULIDTJV5F9AuG9LisScQcONgIdPkY6-duV61lGg95h2uT0t&uniplatform=NZKPT&language=CHS
Liang, Y., McMeeking, R.M.: A finite element simulation scheme for biological muscular hydrostats. J. Theor. Biol.theor. Biol. 242, 142–150 (2006). https://doi.org/10.1016/j.jtbi.2006.02.008
Manti, M., Cacucciolo, V., Cianchetti, M.: Stiffening in soft robotics: a review of the state of the art. IEEE Robot. Autom. Mag.autom. Mag. 23(3), 93–106 (2016). https://doi.org/10.1109/MRA.2016.2582718
McMahan, W., Jones, B. A. and Walker, I.D.: Design and implementation of a multi-section continuum robot: air-octor. 2005 IEEE/RSJ international conference on intelligent robots and systems. IEEE (2005). https://doi.org/10.1109/IROS.2005.1545487
Olguín-Díaz, E.T., Christian, P.V., Navarro, D.: On the modelling of soft-robots as quasi-continuum lagrangian dynamical systems with well-posed input matrix. Physics 5, 115–120 (2018). https://doi.org/10.48550/arXiv.1812.02738
Ranzani, T., Cianchetti, M., Gerboni, G., et al.: A Soft Modular manipulator for minimally invasive surgery: design and characterization of a single module. IEEE Trans. Robot. 32, 187–200 (2016). https://doi.org/10.1109/TRO.2015.2507160
Renda, F., Giorelli, M., Calisti, M., et al.: Dynamic model of a multibending soft robot arm driven by cables. IEEE Trans. Robot. 30, 1109–1122 (2014). https://doi.org/10.1109/TRO.2014.2325992
Sui, D., Zhao, S., Wang, T., et al.: Design of a bio-inspired extensible continuum manipulator with variable stiffness. J. Bionic Eng. (2022). https://doi.org/10.1007/s42235-022-00213-0
Sun, Y., Liu, Y., Pancheri, F., Lueth, T.C.: Larg: A lightweight robotic gripper with 3-d topology optimized adaptive fingers. IEEE/ASME Trans. Mechatron.mechatron. 27(4), 2026–2034 (2022). https://doi.org/10.1109/TMECH.2022.3170800
Tatlicioglu, E., Walker, I.D., Dawson, D.M.: Dynamic modelling for planar extensible continuum robot manipulators. IEEE Int. Conf. Robot. Autom. 2007, 363173 (2007). https://doi.org/10.1109/ROBOT.2007.363173
Trivedi, D., Lotfi, A., Rahn, C.D.: Geometrically exact models for soft robotic manipulators. IEEE Trans. Robot. 24, 773–780 (2008). https://doi.org/10.1109/TRO.2008.924923
Wang, Z., Zhang, Y., Li, G., et al.: Stiffness modulation for soft robot joint via lattice structure configuration design. Procedia CIRP 100, 732–737 (2021). https://doi.org/10.1016/j.procir.2021.05.149
Webster, R.J., Jones, B.A.: Design and kinematic modeling of constant curvature continuum robots: a review. Int. J. Robot. Res. 29, 1661–1683 (2010). https://doi.org/10.1177/0278364910368147
Wehner, M., Truby, R.L., Fitzgerald, D.J., et al.: An integrated design and fabrication strategy for entirely soft autonomous robots. Nature 536, 451–455 (2016). https://doi.org/10.1038/nature19100
Wei, D., Gao, T., Mo, X., et al.: Flexible bio-tensegrity manipulator with multi-degree of freedom and variable structure. Chin. J. Mech. Eng. 30, 56–66 (2020). https://doi.org/10.1186/s10033-019-0426-7
Wockenfuß, W.R., Brandt, V., Weisheit, L., et al.: Design, modeling and validation of a tendon-driven soft continuum robot for planar motion based on variable stiffness structures. IEEE Robot. Autom. Lett. 7, 3985–3991 (2022). https://doi.org/10.1109/LRA.2022.3149031
Xavier, M.S., Tawk, C.D., Zolfagharian, A., Pinskier, J., Howard, D., Young, T., Lai, J., et al.: Soft pneumatic actuators: a review of design, fabrication, modeling, sensing, control and applications. IEEE Access 10, 59442–59485 (2022). https://doi.org/10.1109/ACCESS.2022.3179589
Yan, J., Xu, Z., Shi, P., et al.: A human-inspired soft finger with dual-mode morphing enabled by variable stiffness mechanism. Soft Rob. 9, 399–411 (2022). https://doi.org/10.1089/soro.2020.0153
Yan, J., Shi, P., Zhang, X., Zhao, J.: Review of biomimetic mechanism, actuation, modeling and control in soft manipulators, J. Mech. Eng. 54, 1–14 (2018). https://kns.cnki.net/kcms/detail/11.2187.TH.20180402.0826.002.html
Yao, L., Li, J., Dong, H.: Variable stiffness analysis on a pneumatic soft manipulator, J. Mech. Eng. 56, 36–44 (2020). https://kns.cnki.net/kcms/detail/11.2187.TH.20200416.2040.133.html
Yekutieli, Y., Mitelman, R., Hochner, B., et al.: Analyzing octopus movements using three-dimensional reconstruction. J. Neurophysiol.neurophysiol. 98, 1775–1790 (2007). https://doi.org/10.1152/jn.00739.2006
Zhao, Y., Gen, D., Liu, X., Sun, G.: Kinematics analysis and experiment on pneumatic flexible fruit and vegetable picking manipulator. J. Agric. Mechaniz. 50, 31–42 (2019). https://kns.cnki.net/kcms/detail/11.1964.S.20190329.0849.002.html
Zheng, T., Branson, D.T., Guglielmino, E., et al.: A 3D dynamic model for continuum robots inspired by an octopus arm. IEEE Int. Conf. Robot. Autom. 2011, 3652–3657 (2011). https://doi.org/10.1109/ICRA.2011.5979599
Acknowledgements
This work is supported by the National Natural Science Foundation of China (No. 52175100), the Natural Science Foundation of Jiangsu Province (BK20201379), and the Jiangsu Provincial Natural Science Research Major Project (21KJA460013).
Author information
Authors and Affiliations
Contributions
Q.S. Jiang and K.Cai wrote the main manuscript text, S.L. Wu prepared figures 7-9 and F.Y. Xu provided method guidance. All authors reviewed the manuscript.
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Jiang, Q., Cai, K., Wu, S. et al. Design and experiment of a variable stiffness soft manipulator for non-destructive grasping. Int J Intell Robot Appl (2024). https://doi.org/10.1007/s41315-024-00320-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s41315-024-00320-7