Abstract
In solar technology mirrors are used with an outer and rear coating of a reflective layer. The reflection coefficient of mirrors with an external coating is greater than that of mirrors with a rear coating, but over time it decreases due to the destructive effects of the external environment. Therefore, solar technology began to apply mirrors with an external coating and a protective film to protect them from the effects of the external environment. The paper presents the results of computer simulation of protective films for aluminum mirrors. It is shown that dielectric films with a refractive index from 1.38 to 1.8 have practically no effect on the reflectance of an aluminum mirror if their thickness does not exceed 15 nm. To protect the surface of an aluminum mirror, SiO2 + Al and ZnS + MgF2 mixed films with a thickness from 10 to 15 nm with a SiO2 and ZnS concentration of 10% are recommended. Of interest is a MgF2 + ZnS film with a MgF2 concentration of 43% and a thickness of 10–15 nm. The film reduces the reflection coefficient of the mirror by no more than 2% and has no internal stresses.
REFERENCES
Kennedy, C.E., Review of mid- to high-temperature solar selective absorber materials, Technical Report, National Renewable Energy Laboratory, 2002.
Spravochnik tekhnologa-optika (Optical Technologist’s Handbook), Okatov, M.A., Ed., St. Petersburg: Politekhnika, 2004.
Ritter, E., Dielectric film materials for optical applications, in Physics of Thin Films, New York: Academic Press, 1975, vol. 8, p. 1.
Krushinskaya, L.A. and Stel’makh, Ya.A., Structure and some properties of thick aluminum oxide condensates obtained by electron beam evaporation and vapor deposition in vacuum, Vopr. At. Nauki Tekh., 2011, vol. 19, no. 6, pp. 92–98.
Kosevich, V.M. and Palatnik, L.S., Mekhanizm obrazovaniya i substruktura kondensirovannykh plenok (Mechanism of Formation and Substructure of Condensed Films), Moscow: Nauka, 1972.
Kaiser, N., Review of the fundamentals of thin-film growth, Appl. Opt., 2002, vol. 41, no. 16, pp. 3053–3060. https://doi.org/10.1364/ao.4100305
Dyskin, V.G. and Gaziev, U., Method for choosing the components of two-phase composite materials for selective coatings, Appl. Sol. Energy, 1993, vol. 29, no. 4, pp. 70–74.
Stenzel, O., A model for calculating the effect of nanosized pores on refractive index, thermal shift and mechanical stress in optical coatings, J. Phys. D: Appl. Phys., 2009, vol. 42, no. 5, p. 055312. https://doi.org/10.1088/0022-3727/42/5/055312
Gubanova, L.A. and Zverev, V.A., Creation of interference coatings with improved mechanical properties based on mixed films, Izv. Vyssh. Uchebn. Zaved., Priborostr., 2012, vol. 55, no. 4, pp. 46–49.
Baranov, A.N. and Muranova, G.A., Optimization of the composition of blended films for the infrared region of the spectrum, Opt. Zh., 2014, vol. 81, no. 4, pp. 77–81. https://doi.org/10.1364/JOT.81.000227
Ryu, T.U., Hahn, S.H., Kim, S.W., and Kim, E.J., Optical, mechanical and thermal properties of MgF2–ZnS and MgF2–Ta2O5 composite thin films deposited by coevaporation, Opt. Eng., 2000, vol. 39, no. 12, pp. 3207–3213. https://doi.org/10.1117/1.132097
P. H. Berning, Theory and calculation of optical thin films, in Physics of Thin Films, New York: Academic Press, 1963, vol. 1.
Born, M. and Wolf, E., Principles of Optics, Oxford, UK: Pergamon Press, 1959.
Garnett, J.C.M., Colors in metal glasses and in metallic films, Philos. Trans. R. Soc. A: Math., Phys. Eng. Sci., 1904, vol. 203, nos. 359–371, pp. 385–420. https://doi.org/10.1098/rsta.1904.0024
Palik, E., Handbook of Optical Constants of Solids, New York: Academic Press, 1985.
Zolotarev, V.M., Morozov, V.N., and Smirnova, E.V., Opticheskie postoyannye prirodnykh i tekhnicheskikh sred (Optical Constants of Natural and Technical Media), Leningrad: Khimiya, 1984.
Gaziev, U.Kh., Settarova, Z.S., and Dyskin, V.G., Mirrors for solar technology and optical instrumentation, Geliotekhnika, 1999, no. 3, pp. 37–39.
Jacobson, R., Inhomogeneous and coevaporated homogeneous films for optical applications, in Physics of Thin Films, Haas, G., Francombe, M., and Hoffman, R., Eds., New York: Academic Press, 1975, vol. 8, p. 51.
Funding
This work was supported by ongoing funding from the Academy of Sciences of the Republic of Uzbekistan. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Suleymanov, S.X., Dyskin, V.G., Djanklich, M.U. et al. Computer Simulation of the Reflection Coefficient of Protective Coatings of Mirrors of Solar Devices. Appl. Sol. Energy 59, 747–752 (2023). https://doi.org/10.3103/S0003701X23602004
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0003701X23602004