In this work the influence of various plasticizers on sintering powder materials based upon iron alloyed with copper is studied. It is shown that introduction of plastifiers into powder mixtures increases relative density by 4–10%. Performance of thermal mixing has a favorable effect on relative density after sintering. A workpiece after sintering with “warm” mixing has a relative density of 90–94%. The greatest relative volumetric shrinkage of 6.5% is observed for specimens of the composition PZhRV 2.200.28 + 0.7 wt.% Br + 0.7 wt.% Cu + 1 w t.% s t. C u + 1 wt.% Al2O3 mixed in a paddle mixer in a warm regime. Shrinkage is almost absent in specimens of composition PZHRV 2.200.28 + 0.7 wt.% Br + 0.7 wt.% Cu + 1 wt.% st. Cu.
Similar content being viewed by others
References
V. V. Skorokhod, Rheological Bases of Sintering Theory [in Russian], Naukova Dumka, Kiev (2072).
B. S. Mitin (editor), Powder Metallurgy and Coating Deposition: High School Textbook [in Russian], Metallurgiya, Moscow (1987).
I. D. Radomysel’skii, G. T. Serdyuk, and N. I. Shcherban’, Structural Powder Materials [in Russian], Tekhnika, Kiev (1985).
Yu. G. Dorofeev, L. G. Marinenko, and V. I. Ustimenko, Structural Powder Materials and Objects [in Russian], Metallurgiya, Moscow 91986).
R. A. Andrievskii, Powder Metallurgy [in Russian], Metallurgiya, Moscow (1991).
V. Yu. Lopatin, Zh. V. Eremeeva, G. Kh. Sharipzyanova, and N. M. Nitkin, Powder Metallurgy in Automobile Construction and Other Branches of Industry, Teaching Aid [in Russian], Univ. Mashinostroeniya, Moscow (2014).
R. F. Khalter, “Preparation of components for automobiles from high quality materials,” in: Powder Metallurgy of Special Purpose Materials [in Russian], Metallurgiya (1977).
V. K. Narva, Zh. V. Eremeeva, E. Yu. Lopatin, O. V. Korzinkov, T. V. Fedina, A. Melent’ev, and E. S. Trukhina, “Steel powder mixtures for domestic production prepared for compaction,” in: Powder Metallurgy: Surface Engineering, New Powder Composite Materials. Welding. Coll Papers 11th Internat. Symp. in 2 vol. (2019).
Zh. V. Eremeeva, V. K. Narva, V. Yu. Lopatin, O. V. Korznikov, T. V. Fedina, G. S. Vodovozova, and S. V. Baryshkov, RF Pat. 2692002, MPК B22F1/00, Method for Preparing Complexly Alloyed Powder Mixture Ready for Molding, No. 2018145380; Claim 19.12.2018; Publ. 19.06.2019, Bull. No. 17.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 67, No. 9, pp. 58–63, September, 2023, Russian https://doi.org/10.52351/00260827_2023_09_58
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Eremeeva, J.V., Ter-Vaganyants, Y.S. & Korznikov, O.V. Process of Sintering Iron-Based Powder Materials Alloyed with Copper with Introduction of Various Plasticizers Into an Initial Charge. Metallurgist 67, 1315–1324 (2024). https://doi.org/10.1007/s11015-024-01623-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-024-01623-7