In aggressive environments under a load, steels are subject to chloride corrosion cracking as cracks on the metal surface. This work proposes compositions of steel with additives from groups 5–8, d-transition rare earth metals (REMs) Ni, V, W, and Re, intended to function under constant tensile stresses in an aggressive corrosive environment. Technologies have been developed for the mass industrial production of steel in an electric arc furnace (EAF) with the batch introduction of Ni, V, W, and Re and electromagnetic mixing. For smaller volumes of serial production, electron beam remelting (EBR) with thermal and radiation-chemical effects is used. Studies have shown that the composition of alloying elements in steel during melting in an EAF and electroarc doping is identical and corresponds to that stated; with EBR, the O, P, S, Si, Al, and Ti contents decreased. In the EAF, the use of an ultrahigh purity stainless steel alloy source material does not mix impurity elements P, S, Sn, and Pb with the melt. The mass of losses of alloying elements from the total losses in the EAF is not more than 0.1%–0.15%. Re alloying leads to a stable increase in the conditional yield strength σ0.2 and the tensile strength σv from 20°C to 1200°C, and the strain-to-fracture increased to 62%. Tests for the resistance of steel with additives of d-transition refractory REMs Ni, V, W, and Re against chloride corrosion cracking under the influence of tensile stresses showed that the time to fracture increased by 30%–40%.
Similar content being viewed by others
References
E. E. Shaly, T. E. Shalaya, and S. N. Leonovich, The Influence of Carbonization on Chloride Corrosion of Marine Hydraulic Structures, Young Scientists for Development of the National Technology Initiative (POISK), No. 1-2, 233–235 (2019).
M. V. Odnobokova, N. A. Enikeev, A. N. Belyakov, and P. O. Kaibyshev, “Stability of the ultrafine-grained structure of austenitic corrosion-resistant steels during annealing,” Phys. Met. Metallogr., 122, No. 8, 775–781 (2021); DOI https://doi.org/10.1134/S0031918X21070061.
S. A. Kaluzhina, O. A. Kozaderov, Yu. I. Marygina, and I. V. Protasova, “Cathodic behavior of the dealloyed Ni–Zn coating in sodium hydroxide solution,” Int. J. Corros. Scale Inhib., 9, No. 1, 334–343 (2020); DOI: https://doi.org/10.17675/2305-6894-2020-9-1-22.
NIPPON STEEL CORPORATION https://www.nipponsteel.com.
V. V. Sidorov, P. G. Min, and Yu. V. Artemenko, “The influence of rare earth elements on the resistance of single crystals of the hightemperature alloy VZhL738M to chloride corrosion,” Korroz.: Mater. Zashchita, No. 11, 1–7 (2018); DOI: https://doi.org/10.31044/1813-7016-2018-0-11-1-7.
A. V. Malygin, V. I. Vigdorovich, S. A. Kaluzhina, and E. Yu. Gladysheva, “Corrosion of St3 and 12H18N10T in neutral chloride media at elevated temperatures and heat transfer,” Vestn. Tambovsk. Univ. Ser.: Yestestven. Tekhnich. Nauki, 6, No. 3, 299–301 (2001).
J. L. Li, S. D. Zhu, K. T. Qu, and L. Liu, “Corrosion of 80ss pipe steel in chloride solution containing Co2 and H2S in the presence and absence of Ca2+ and Mg2+,” Electrokhimiya, 50, No. 9, 932 (2014); DOI https://doi.org/10.7868/S0424857014090060.
V. M. Blinov, E. I. Lukin, E. V. Blinov, et al., “Tensile fracture of austenitic corrosion-resistant steels with an overequilibrium nitrogen content and various vanadium contents,” Russian Metallurgy (Metally), 2021, No. 10, 1265–1269 (2021); DOI: https://doi.org/10.1134/S0036029521100062.
T. E. Litvinova and I. L. Oleinik, “Kinetics of dissolution of rare earth metal phosphates by solutions of alkali metal carbonates,” Zapiski Gornogo Instituta, 251, 712–722 (2021); DOI: https://doi.org/10.31897/PMI.2021.5.10.
I. O. Bannykh and A. M. Glezer, “Basic principles of alloying and treatment of high-nitrogen austenitic corrosion-resistant steels,” Russ. Metall. (Met.), 2019, No. 4, 336–340 (2019); DOI: https://doi.org/10.1134/S0036029519040037.
L. A. Smirnov, V. A. Rovnushkin, A. S. Oryshchenko, et al., “Modification of steel and alloys with rare earth elements,” Metallurg, No. 11, 57–63 (2015).
A. S. Volego and N. V. Kudrevatykh, Physics of Metals. Rare Earth Metals and Their Compounds [in Russian], Guidebook, Izdatel’stvo Yurayt, Moscow (2020).
D. M. Lyubov and A. A. Trifonov, “Polyhydride complexes of rare-earth metals,” INEOS OPEN, 3, No. 1, 1–19 (2020); DOI: https://doi.org/10.32931/io2001r.
S. A. Botnikov, O. S. Khlybov, and A. N. Kostychev, “Development of the metal temperature prediction model for steel-pouring and tundish ladles used at the casting and rolling complex,” Metallurgist, 63, No. 11, 792–803 (2019); DOI:https://doi.org/10.1007/s11015-019-00891-y.
V. I. Ivanov, P. S. Gordienko, L. A. Konevtsov, et al., “Study of the composition and structure of the alloyed surface layer during electrospark doping of steel with 35 rhenium,” Tekhnich. Servis Mashin, No. 1(150), 110–121 (2023); DOI: https://doi.org/10.22314/2618-8287-2023-61-1-110-121.
V. A. Golubtsov, I. V. Ryabchikov, I. V. Bakin, et al., “Application of microcrystalline complex modifiers for out-of-furnace processing of steel. Part 1. The role of non-metallic inclusions in the formation of steel quality,” Chern. Metallurg. Byull. NTiEI, 77, No. 3, 295–311 (2021); DOI https://doi.org/10.32339/0135-5910-2021-3-295-309.
V. G. Milyuts, V. V. Tsukanov, and V. A. Golubtsov, “Application of rare earth metals in the manufacture of high-strength hull steel from ingots,” Tyazh. Mashinostr., No. 3, 2–10 (2021).
V. V. Guk, E. A. Branitskaya, and G. A. Filippov, “The influence of complex microalloying on the mechanical properties and corrosion characteristics of low-carbon stainless steels,” Stal’, No. 1, 49–52 (2018).
N. K. Tursunov, A. E. Semin, and E. A. Sanokulov, “Study of dephosphorization and desulfurization processes during smelting of 20GL steel in an induction crucible furnace with further processing in a ladle using rare earth metals,” Chern. Met., No. 1, 33–40 (2017).
L. M. Kaputkina, A. G. Svyazhin, I. V. Smarygina, and V. E. Kindo, “High-temperature strength of austenitic nitrogen corrosionresistant Cr–Ni–Mn steels with copper additive,” Met. Sci. Heat Treat., 60, No. 3-4, 158–164 (2018); DOI: https://doi.org/10.1007/s11041-018-0254-x.
V. A. Golubtsov, I. V. Ryabchikov, I. V. Bakin, et al., “Application of microcrystalline complex modifiers for out-of-furnace processing of steel. Part 2. Results of the development of technology for processing steel of a wide range,” Chern. Metallurg. Byull. NTiEI, 77, No. 4, 418–431 (2021); DOI https://doi.org/10.32339/0135-5910-2021-4-418-431.
S. K. Zhou, “Study of overgrowing of a submersible nozzle during continuous casting of stainless steel RE-253MA,” Metallurg, No. 6, 49–53 (2013).
V. G. Milyuts, V. V. Tsukanov, E. I. Pryakhin, and L. B. Nikitina, “Development of manufacturing technology for high-strength hull steel reducing production cycle and providing high-quality sheets,” J. Min. Inst., 239, 536 (2019); https://doi.org/10.31897/pmi.2019.5.536.
A. I. Zaitsev, B. M. Mogutnov, A. V. Pimenov, et al., “Research and modeling of the interaction of rare earth metals with iron melts to determine their effect on the resistance to local corrosion and mechanical properties of pipe steels,” Problemy Chern. Metallurg. Materialoved., No. 1, 39–48 (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallurg, Vol. 67, No. 10, pp. 59–68, October, 2023. Russian DOI: https://doi.org/10.52351/00260827_2023_10_59
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ivanova, T.N. Studies of the Influence of D -Transition Rare Earth Metals on Steel Resistance. Metallurgist 67, 1494–1505 (2024). https://doi.org/10.1007/s11015-024-01642-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-024-01642-4