Abstract
Based on mathematical modeling of the process of electrohydraulic sheet stamping, the influence of a pressure plate on the deformation of a workpiece rigidly clamped along its outer contour was studied. The influence of the thickness of the pressure plate and its internal diameter, in relation to the diameter of the cavity of the cylindrical discharge chamber, on the energy of plastic deformation of the workpiece and the shape of its deflection; parameters of the pressure plate on the pressure of hydrodynamic waves on the workpiece; and the shape of its deflection and the efficiency of using the energy stored in the capacitor bank for plastic deformation of the workpiece have been established.
REFERENCES
Naugol’nykh, K.A. and Roi, N.A., Elektricheskie razryady v vode (Electrical Discharges in water), Moscow: Nauka, 1971.
Kosenkov, V.M. and Bychkov, V.M., The influence of circuit inductance on the energy characteristics of electric discharge and deformation of plates in water, Tech. Phys. Lett., 2017, vol. 43. p. 774. https://doi.org/10.1134/S1063785017080223
Chachin, V.N., Shaduya, V.L., Zhuravskii, A.Yu., and Zdor, G.N., Elektrogidroimpul’snoe formoobrazovanie s ispol’zovaniem zamknutykh kamer (Electrohydropulse Shaping Using Closed Chambers), Minsk: Nauka i tekhnika, 1985.
Kosenkov, V.M., Influence of the volume of a cylindrical discharge chamber with rigid walls on the pressure field in the water filling it, Surf. Eng. Appl. Electrochem., 2023, vol. 59, p. 742. https://doi.org/10.3103/S1068375523060121
Chachin, V.N., Bogoyavlenskii, K.N., and Vagin, V.A., Elektrogidroimpul’snaya obrabotka materialov v mashinostroenii (Electrohydropulse Processing of Materials in Mechanical Engineering), Minsk: Nauka i tekhnika, 1987.
Kosenkov, V.M., Influence of parameters of the conical cavity of the discharge chamber on the efficiency of electrohydraulic stamping, Elektron. Obrab. Mater., 2022, no. 3, p. 55. https://doi.org/10.52577/eom.2022.58.3.55
Zhovnovatyuk, Ya.S., Ways to stabilize and intensify loading fields by shock waves during electrohydraulic pulse stamping through design solutions, Aviatsionno-Kosm. Tekh. Tekhnol., 2011, vol. 85, no. 8, p. 15.
Mazurovskii, B.Ya. and Sizev, A.N., Elektro-gidravlicheskii effekt v listovoi shtampovke (Electro-Hydraulic Effect in Sheet Metal Stamping), Kiev: Naukova dumka, 1983.
Mamutov, A.V., Golovashchenko, S.F., Bessonov, N.M., and Mamutov, V.S., Electrohydraulic forming of low volume and prototype parts: Process design and practical examples, J. Manufact. Mater. Proces., 2021, vol. 5, no. 47. https://doi.org/10.3390/jmmp5020047
Cheng, J., Green, D.E., and Golovashchenko, S.F., Formability enhancement of DP600 steel sheets in electro-hydraulic die forming, J. Mater. Proces. Technol., 2017, vol. 244, p. 178.
Mamutov, A.V., Golovashchenko, S.F., Mamutov, V.S., and Bonnen, J.J.F., Modeling of electrohydraulic forming of sheet metal parts, J. Mater. Process. Technol., 2015, vol. 219, p. 84.
Hassannejadasl, A. and Daniel, E.G., Golovashchenko, S.F., Javad, S., et al., Numerical modelling of electrohydraulic free-forming and die-forming of dp590 steel, J. Manuf. Process., 2014, vol. 16, no. 3, p. 391. https://doi.org/10.1016/j.jmapro.2014.04.004
Gillard, A.J., Golovashchenko, S.F., and Mamutov, A.V., Effect of quasi-static prestrain on the formability of dual phase steels in electrohydraulic forming, J. Manuf. Process., 2013, vol. 15, no. 2, p. 201. https://doi.org/10.1016/j.jmapro.2012.12.005
Golovashchenko, S.F., Gillard, A.J., Mamutov, A.V., Bonnen, J.F., et al., Electrohydraulic trimming of advanced and ultra high strength steels, J. Mater. Process. Technol., 2014, vol. 214, no. 4, p. 1027. https://doi.org/10.1016/j.jmatprotec.2013.09.003
Kosenkov, V.M., Influence of the method of sheet aluminum alloys deformation on the increase of plastic deformations, Lett. Mater., 2014, vol. 4, no. 1, p. 18. https://doi.org/10.22226/2410-3535-2014-1-18-21
Kosenkov, V.M., Gas-vapor cavity effect on pressure field in deformable wall closed discharge chamber, Surf. Eng. Appl. Electrochem., 2022, vol. 58, p. 63. https://doi.org/10.3103/s1068375522010057
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The author of this work declares that he has no conflicts of interest.
Additional information
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Kosenkov, V.M. Influence of Pressure Plate Parameters on the Efficiency of Electrohydraulic Deformation of a Rigidly Clamped Workpiece. Surf. Engin. Appl.Electrochem. 60, 122–128 (2024). https://doi.org/10.3103/S1068375524010083
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375524010083