Abstract
This study aimed to investigate the effects of boron compounds on cellulose fibers during recycling. Three recycling stages were conducted, applying boric acid and borax to bleached papers. Physical, mechanical, and optical properties were measured after each process. The highest water absorption (218 g/m2) was observed in test papers from the second recycling stage using 10% borax-treated pulps (10Bx2). Boric acid treatment notably improved burst strength, with the highest value (3.94 kPa m2/g) in the first recycling stage with 5.0% boric acid treatment (5Ba1). The highest tensile strength (49.48 Nm/g) occurred in the first recycling stage with 5.0% boric acid treatment, while the lowest (17.41 Nm/g) was in the second recycling stage (5Bx2) with 5.0% borax treatment. Tear strength exhibited different trends from burst and tensile strength, with notable improvements using 5.0% and 10% boric acid and 10% borax treatments on recovered cellulose fibers. The highest tear strength (9.20 Nm2/g) was achieved with 5.0% boric acid treatment (5Ba2) in the second recycling stage, followed by 8.21 Nm2/g with 10% boric acid treatment (10Ba1) in the first recycling stage. Tear strength trends differed from burst and tensile strength properties, regardless of treatment conditions.
Similar content being viewed by others
References
Bajpai P (2018) Fiber Modification. In ‘Biotechnol. Pulp Pap. Process.’, ed. P. Bajpai, Springer, Singapore
Bhat GR, Heitmann J, Joyce TW (1991) Novel techniques for enhancing the strength of secondary fiber. Tappi J 74:151–157
Biermann CJ (1996) Handbook of pulping and papermaking. Elsevier, London, USA
Bisanda ETN (2000) The effect of alkali treatment on the adhesion characteristics of Sisal fibers. Appl Compos Mater 7:331–339. https://doi.org/10.1023/A:1026586023129
Botkova M, Suty S, Jablonsky M, Kucerkova L, Vrska M (2013) Monitoring of kraft pulps swelling in water. Cellul Chem Technol 47:95–102
Çiçekler M, Şahin HT, Tutuş A (2022) Effects of butylamine treatment on cellulose fibers during recycling of old corrugated containers (OCC). Cellulose Chem Technol 56:839–850. https://doi.org/10.35812/CelluloseChemTechnol.2022.56.75
Çi̇çeklerŞahi̇n MHT (2020) A study on effects of wetting-drying on bleached kraft paper properties. Bartın Orman Fakültesi Dergisi 22:436–446
Cichosz S, Masek A (2019) Cellulose structure and property changes indicated via wetting-drying cycles. Polym Degrad Stab 167:33–43. https://doi.org/10.1016/j.polymdegradstab.2019.05.033
Claramunt J, Ardanuy M, García-Hortal JA, Filho RDT (2011) The hornification of vegetable fibers to improve the durability of cement mortar composites. Cement Concr Compos 33:586–595. https://doi.org/10.1016/j.cemconcomp.2011.03.003
Clark JA (1978) Pulping technology. Miller Freeman Publications Inc., California, USA
Corrêa AC, de Morais TE, Pessan LA, Mattoso LHC (2010) Cellulose nanofibers from curaua fibers. Cellulose 17:1183–1192. https://doi.org/10.1007/s10570-010-9453-3
Darwish S, Hadidi NME, Mansour M (2013) The effect of fungal decay on Ficus sycomorus wood. Int J Conserv Sci 4:271–282
de Costa MA, da CostaPastoreBragaGonçalez AFTCMJWBJC (2011) Characterization of wood decay by rot fungi using colorimetry and infrared spectroscopy. Ciênc Florest 21:567–577. https://doi.org/10.5902/198050983814
Fackler K, Schwanninger M (2011) Accessibility of hydroxyl groups of brown-rot degraded spruce wood to heavy water. J Near Infrared Spectro 19:359–368. https://doi.org/10.1255/jnirs.943
Fackler K, Schwanninger M, Gradinger C, Hinterstoisser B, Messner K (2007) Qualitative and quantitative changes of beech wood degraded by wood-rotting basidiomycetes monitored by Fourier transform infrared spectroscopic methods and multivariate data analysis. FEMS Microbiol Lett 271:162–169. https://doi.org/10.1111/j.1574-6968.2007.00712.x
Gallio E, Zanatta P, Ribes DD, Lazarotto M, Gatto DA, Beltrame R, Gallio E, Zanatta P, Ribes DD, Lazarotto M, Gatto DA, Beltrame R (2018) Fourier transform infrared spectroscopy in treated woods deteriorated by a white rot fungus. Maderas Ciencia y Tecnología 20:479–488. https://doi.org/10.4067/S0718-221X2018005031701
Ginebreda A, Guillén D, Barceló D, Darbra RM (2012) Additives in the paper industry. In: Bilitewski B, Darbra RM, Barceló D (eds) global risk-based management of chemical additives i: production, usage and environmental occurrence. Springer, Berlin, Heidelberg, pp 11–34
Gurnagul N (1995) Sodium hydroxide addition during recycling: Effects on fiber swelling and sheet strength. Tappi J 78:119–124
Hashim MY, Roslan MN, Amin AM, Zaidi AMA, Ariffin S (2012) Mercerization treatment parameter effect on natural fiber reinforced polymer matrix composite: a brief review. Int J Mater Metall Eng 6:784–790
Hubbe MA, Venditti RA, OsJ R (2007) What happens to cellulosic fibers during papermaking and recycling? A review. BioRes 2:739–788. https://doi.org/10.15376/biores.2.4.739-788
Joutsimo OP, Giacomozzi D (2015) Changes in cell wall structure during kraft processing of Pinus radiata. BioResources 10:2461–2478. https://doi.org/10.15376/biores.10.2.2461-2478
Kalia S, Kaith BS, Kaur I (2009) Pretreatments of natural fibers and their application as reinforcing material in polymer composites—a review. Polym Eng Sci 49:1253–1272. https://doi.org/10.1002/pen.21328
Kang K-Y, Hwang K-R, Park J-Y, Lee J-P, Kim J-S, Lee J-S (2018) Critical point drying: an effective drying method for direct measurement of the surface area of a pretreated cellulosic biomass. Polymers 10:676. https://doi.org/10.3390/polym10060676
Kargarzadeh H, Mariano M, Gopakumar D, Ahmad I, Thomas S, Dufresne A, Huang J, Lin N (2018) Advances in cellulose nanomaterials. Cellulose 25:2151–2189. https://doi.org/10.1007/s10570-018-1723-5
Kato KL, Cameron RE (1999) A review of the relationship between thermally-accelerated aging of paper and hornification. Cellulose 6:23–40. https://doi.org/10.1023/A:1009292120151
Kuştaş S, Gülsoy SK (2023) Boron compounds-added kraft pulping from Scots pine. Drvna Industrija 74:43–52. https://doi.org/10.5552/drvind.2023.0014
Luo X, Zhu JY (2011) Effects of drying-induced fiber hornification on enzymatic saccharification of lignocelluloses. Enzyme Microb Technol 48:92–99. https://doi.org/10.1016/j.enzmictec.2010.09.014
Luo XL, Zhu JY, Gleisner R, Zhan HY (2011) Effects of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses. Cellulose 18:1055–1062. https://doi.org/10.1007/s10570-011-9541-z
Manandhar S, Shrestha B, Sciortino F, Ariga K, Shrestha LK (2022) Recycling waste paper for further implementation: XRD, FTIR, SEM, and EDS studies. J Oleo Sci 71:619–626. https://doi.org/10.5650/jos.ess21396
Mantanis GI, Young RA, Rowell RM (1995) Swelling of compressed cellulose fiber webs in organic liquids. Cellulose 2:1–22. https://doi.org/10.1007/BF00812768
Mendes S, Hugen LN, Santos DOSRD, Toledo FilhoFerreira SR (2021) Influence of water amount and immersion time on the sisal fibers hornification process. J Nat Fibers 18:1712–1721. https://doi.org/10.1080/15440478.2019.1697990
Mishra OP, Tripathi SK, Bhardwaj NK (2020) Suitability of corn stalk pulp for improving physical strength properties of agro-residue pulp. Cell Chem Technol 54:65–71. https://doi.org/10.35812/CELLULOSECHEMTECHNOL.2020.54.07
Mo W, Chen K, Yang X, Kong F, Liu J, Li B (2022) Elucidating the hornification mechanism of cellulosic fibers during the process of thermal drying. Carbohyd Polym 289:119434. https://doi.org/10.1016/j.carbpol.2022.119434
Morgado DL, Frollini E (2011) Thermal decomposition of mercerized linter cellulose and its acetates obtained from a homogeneous reaction. Polímeros 21:111–117. https://doi.org/10.1590/S0104-14282011005000025
Park S, Venditti RA, Jameel H, Pawlak JJ (2006) Changes in pore size distribution during the drying of cellulose fibers as measured by differential scanning calorimetry. Carbohyd Polym 66:97–103. https://doi.org/10.1016/j.carbpol.2006.02.026
Pozo C, Díaz-Visurraga J, Contreras D, Freer J, Rodríguez J (2016) Characterization of temporal biodegradation of radiata pine by Gloeophyllum trabeum through principal component analysis-based two-dimensional correlation ftir spectroscopy. J Chil Chem Soc 61:2878–2883. https://doi.org/10.4067/S0717-97072016000200006
Sachs IB (1988) Hexamethyldisilazane treatment to restore strength of recycled fiber. Wood Fiber Sci 20:336–343
Sahin HT (2013) A study on paper recycling effects on cellulose properties. Turkish Journal of Forestry 14:74–80. https://doi.org/10.18182/tjf.01580
Sahin HT (2014) A study on recovered secondary fiber for reuse. Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi Seri A 15:183–188
Salem KS, Naithani V, Jameel H, Lucia L, Pal L (2022) A systematic examination of the dynamics of water-cellulose interactions on capillary force-induced fiber collapse. Carbohyd Polym 295:119856. https://doi.org/10.1016/j.carbpol.2022.119856
Salmén L, Stevanic JS (2018) Effect of drying conditions on cellulose microfibril aggregation and “hornification.” Cellulose 25:6333–6344. https://doi.org/10.1007/s10570-018-2039-1
Seddiqi H, Oliaei E, Honarkar H, Jin J, Geonzon LC, Bacabac RG, Klein-Nulend J (2021) Cellulose and its derivatives: toward biomedical applications. Cellulose 28:1893–1931. https://doi.org/10.1007/s10570-020-03674-w
Shibazaki H, Kuga S, Okano T (1997) Mercerization and acid hydrolysis of bacterial cellulose. Cellulose 4:75–87. https://doi.org/10.1023/A:1024273218783
Skachkova VK, Goeva LV, Grachev AV, Kochneva IK, Malinina EA, Shaulov AYu, Berlin AA, Kuznetsov NT (2017) Composites based on triethylammonium dodecahydro-closo-dodecaborate ((Et3NH)2[B12H12]) and sodium silicate water glass. Inorg Mater 53:207–211. https://doi.org/10.1134/S0020168517020133
Strand A, Sundber A, Retulainen E, Salminen K, Oksanen A, Kouko J, Ketola A, Khakalo A, Rojas O (2017) The effect of chemical additives on the strength, stiffness and elongation potential of paper. Nord Pulp Pap Res J 32:324–335. https://doi.org/10.3183/npprj-2017-32-03-p324-335
Sun B, Huang A, Wang Y, Liu J (2015) Natural bamboo (Neosinocalamus affinis Keng) fiber identification using FT-IR and 2D-IR correlation spectroscopy. J Nat Fibers 12:1–11. https://doi.org/10.1080/15440478.2013.796907
Tanpichai S, Phoothong F, Boonmahitthisud A (2022) Superabsorbent cellulose-based hydrogels cross-liked with borax. Sci Rep 12:8920. https://doi.org/10.1038/s41598-022-12688-2
Tappi T205 (2006) Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products. TAPPI, Atlanta, USA
Tappi T403 (2015) Bursting strength of paper. TAPPI, Atlanta, USA
Tappi T414 (2012) Internal tearing resistance of paper (Elmendorf-Type Method). TAPPI, Atlanta, USA
Tappi T425 (2011) Opacity of paper (15/d geometry, illuminant A/2°, 89% reflectance backing and paper backing). TAPPI, Atlanta, USA.
Tappi T441 (2013) Water absorptiveness of sized (non-bibulous) paper, paperboard, and corrugated fiberboard (Cobb test). TAPPI, Atlanta, USA.
Tappi T494 (2006). Tensile properties of paper and paperboard. TAPPI, Atlanta, USA.
Tappi T525 (2017) Diffuse Brightness of Paper, Paperboard and Pulp (d/0). TAPPI, Atlanta, USA.
Tomak ED, Topaloglu E, Gumuskaya E, Yildiz UC, Ay N (2013) An FT-IR study of the changes in chemical composition of bamboo degraded by brown-rot fungi. Int Biodeterior Biodegrad 85:131–138. https://doi.org/10.1016/j.ibiod.2013.05.029
Tsai CC (1979) Characterization of amorphous semiconducting silicon-boron alloys prepared by plasma decomposition. Phys Rev B 19:2041–2055
Tutus A, Comlekcioglu N, Karaman S, Alma MH (2010) Chemical composition and fiber properties of Crambe orientalis and C. tataria. Int J Agric Biol 12:286–290
Weatherwax RC (1977) Collapse of cell-wall pores during drying of cellulose. J Colloid Interface Sci 62:432–446. https://doi.org/10.1016/0021-9797(77)90094-7
Wistara N, Young RA (1999) Properties and treatments of pulps from recycled paper. Part I. Physical and chemical properties of pulps. Cellulose 6:291–324. https://doi.org/10.1023/A:1009221125962
Yang X, Berglund LA (2020) Recycling without fiber degradation—strong paper structures for 3D forming based on nanostructurally tailored wood holocellulose fibers. ACS Sustain Chem Eng 8:1146–1154. https://doi.org/10.1021/acssuschemeng.9b06176
Yilgor N, Dogu D, Moore R, Terzi E, Kartal SN (2013) Evaluation of fungal deterioration in Liquidambar orientalis Mill. heartwood by FT-IR and light microscopy. BioRes 8:2805–2826. https://doi.org/10.15376/biores.8.2.2805-2826
Yilmaz U, Tutuş A, Sönmez S (2022) Investigation of recycling repetition effect on deinkability efficiency and printing properties. J Adhes Sci Technol 36:1299–1313. https://doi.org/10.1080/01694243.2021.1966256
Young RA (1994) Comparison of the properties of chemical cellulose pulps. Cellulose 1:107–130. https://doi.org/10.1007/BF00819662
Zhang X, Wang F, Keer L (2015) Influence of surface modification on the microstructure and thermo-mechanical properties of bamboo fibers. Materials 8:6597–6608. https://doi.org/10.3390/ma8105327
Acknowledgements
The authors wish to thank the Suleyman Demirel University, Scientific Research Coordination Division (SDU-BAP) for their financial support and contribution to this research. This study was carried out within the SDU-BAP project number: 2952-YL-11.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Şahin, H.T., Bozkurt, C. & Çiçekler, M. Investigating the effects of boron compounds on the cellulose fiber performance in paper recycling process. Chem. Pap. (2024). https://doi.org/10.1007/s11696-024-03414-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11696-024-03414-5