The paper is devoted to the problem of identification of hardening parameters of the developed two-level statistical model of polycrystal inelastic deformation taking into account dynamic recrystallization. First, the approximate values of the hardening parameters are obtained, and then they are refined as a result of formulating and solving the optimization problem using the Nelder–Mead method. The result is the set of the parameters that provides high accuracy of the empirical and calculated data on the stress-strain curves during inelastic deformation of a copper polycrystal.
Similar content being viewed by others
References
J. Humphreys, G. S. Rohrer, and A. Rollett, Recrystallization and Related Annealing Phenomena, Elsevier (2017).
K. K. Alaneme and E. A. Okotete, J. Sci.: Adv. Mater. Devices, 4, No. 1, 19–33 (2019); DOI: https://doi.org/10.1016/j.jsamd.2018.12.007.
H. K. Zhang, H. Xiao, X. W. Fang, et al., Mater. Des., 193, 108873 (2020); DOI: https://doi.org/10.1016/j.matdes.2020.108873.
H. A. Derazkola, E. García Gil, A. Murillo-Marrodán, and D. Méresse, Metals, 11, No. 4, 572 (2021); DOI: https://doi.org/10.3390/met11040572.
L. Maire, B. Scholtes, C. Moussa, et al., Mater. Des., 133, 498–519 (2017); DOI: https://doi.org/10.1016/j.matdes.2017.08.015.
M. S. Chen, W. Q. Yuan, Y. C. Lin, et al., Vacuum, 146, 142–151 (2017); DOI: https://doi.org/10.1016/j.vacuum.2017.09.041.
H. Zhu, F. Chen, H. Zhang, and Z. Cui, Sci. China Technol. Sci., 63, No. 3, 357–396 (2020); DOI: https://doi.org/10.1007/s11431-019-9548-x.
P. V. Trusov and A. I. Shveykin, Multilevel Models of Mono- and Polycrystalline Materials: Theory, Algorithms, and Application Examples [in Russian], SB RAS Publising House, Novosibirsk (2019).
F. Roters, M. Diehl, P. Shanthraj, et al., Comput. Mater. Sci., 158, 420–478 (2019); DOI: https://doi.org/10.1016/j.commatsci.2018.04.030.
P. V. Trusov, A. I. Shveykin, N. S. Kondratev, and A. Y. Yants, Phys. Mesomech., 23, No. 6, 33–62 (2020); DOI: https://doi.org/10.24411/1683-805X-2020-16003.
L. Anand, Comput. Methods Appl. Mech. Eng., 193, Nos. 48–51, 5359–5383 (2004); DOI: https://doi.org/10.1016/j.cma.2003.12.068.
S. Koric and B. G. Thomas, J. Mater. Process. Technol., 197, Nos. 1–3, 408–418 (2008); DOI: https://doi.org/10.1016/j.jmatprotec.2007.06.060.
D. L. Henann and L. Anand, Int. J. Plast., 25, No. 10, 1833–1878 (2009); DOI: https://doi.org/10.1016/j.ijplas.2008.11.008.
L. Blaz, T. Sakai, and J. J. Jonas, Metal Science, 17, No. 12, 609–616 (1983); DOI: https://doi.org/10.1179/030634583790420448.
N. S. Kondratev, P. V. Trusov, and A. N. Podsedertsev, PNRPU Mech. Bull., No. 4, 83–97 (2021); DOI: https://doi.org/10.15593/perm.mech/2021.4.09.
N. S. Kondratev, P. V. Trusov, and D. S. Bezverkhy, Lobachevskii J. Math., 44, No. 6, 2306–2316 (2023); DOI: https://doi.org/10.1134/S1995080223060240.
U. F. Kocks and H. Mecking, Prog. Mater. Sci., 48, No. 3, 171–273 (2003); DOI: https://doi.org/10.1016/S0079-6425(02)00003-8.
D. G. Cram, X. Y. Fang, H. S. Zurob, et al., Acta Mater., 60, No. 18, 6390–6404 (2012); DOI: https://doi.org/10.1016/j.actamat.2012.08.021.
E. I. Poliak and J. J. Jonas, Acta Mater., 44, No. 1, 127–136 (1996).
A. V. Panteleev and T. A. Letova, Optimization Methods in Examples and Tasks [in Russian], Higher School Publishing House, Moscow (2005).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Bezverkhy, D.S., Kondratev, N.S. Identification of Hardening Parameters of Two-Level Statistical Model of Polycrystal Inelastic Deformation. Russ Phys J 67, 441–448 (2024). https://doi.org/10.1007/s11182-024-03142-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-024-03142-z