近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
1. Xiang Cheng, Xi Zhang, Yebing Tian, Guangming Zheng, Xianhai Yang, Study on micro helical milling of small holes with flat end mills, International Journal of Advanced Manufacturing Technology, 2018, 97: 3119-3128（SCI: 000436813500116）
2. Xiang Cheng, Jiancheng Liu, Guangming Zheng, Xianhai Yang, Yebing Tian, Study of microcutting fundamentals for peripheral and end cutting edges in micro-end-milling, Journal of Micromechanics and Microengineering, 2018, 28: 015011, (SCI: 000417990400001)
3. Xiang Cheng, Li Li, Yumei Huang, Xianhai Yang, Shuangjie Zhou, Theoretical modeling of the critical conditions for ductile-regime milling of single crystalline silicon, Proceedings of the Institution of Mechanical Engineering Part C: Journal of Mechanical Engineering Science, 2015,229(8): 1462-1469 （SCI:000357531000009）
4. X. Cheng, X.T. Wei, X.H. Yang, Y.B. Guo, Unified criterion for brittle-ductile transition in mechanical microcutting of brittle materials, Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2014, 136(5):051013-1-8 (SCI:000341978200014）
5. X. Cheng, X.H. Yang, G.M. Zheng, Y.M. Huang, L. Li, Fabrication accuracy analysis of micromilling tools with complicated geometries by wire EDM, Journal of Mechanical Science and Technology, 2014,28(6):2329-2335 (SCI:000338119100036）
6. X. Cheng, X.H. Yang, Y.M. Huang, G.M. Zheng, Li Li， Helical surface creation by wire electrical discharge machining for micro tools，Robotics and Computer-Integrated Manufacturing， 2014， 30（3）：287-294 （SCI:000330335500006）
7. Xiang Cheng, Li Li, Yumei Huang, Shuangjie Zhou, Xianhai Yang, Junying Liu，Study on the error distribution and key parameters for a desktop multi-axis micro milling machine tool, International Journal of Advanced Manufacturing Technology, 2013, 67(9-12):2521-2527（SCI：000322326300046）
8. Xiang Cheng, Yumei Huang, Shuangjie Zhou, Junying Liu, Xianhai Yang, Study on the generative design method and error budget of a novel desktop multi-axis laser machine for micro tool fabrications, International Journal of Advanced Manufacturing Technology,2012, 60(5):545-552.(SCI: 000304097500013)
9. Cheng X., Liu J.C., Zheng G.M., Study on the high-precision shrink-fit holders for micro/nano milling, Advances in Computer Science Research, 2015, 10: 1220-1225. (SCI: 000373134100231)
10. Cheng X., Liu J.C., Zheng G.M., Xu R.F., Study on a desktop machine tool for micromilling, Advances in Computer Science Research, 2015, 10: 1226-1231. (SCI: 000373134100232)
11. X. Cheng, Z.G. Wang, K. Nakamoto, K. Yamazaki, A study on the micro tooling for micro/nano milling, International Journal of Advanced Manufacturing Technology, 2011, 53(5): 523-533 (SCI: 000287754200009)
12. X. Cheng, Z.G. Wang, K. Nakamoto, K. Yamazaki, Design and development of micro straight edge end mills for micronano machining of hard and brittle materials, Journal of Mechanical Science and Technology, 2010，24(11)，1-8 (SCI: 000284024100015)
13. X. Cheng, Z.G. Wang, S. Kobayashi, K.Nakamoto, K. Yamazaki, Tool fabrication system for micro/nano milling---Function analysis and design of a six-axis Wire EDM machine, International Journal of Advanced Manufacturing Technology, 2010， 46(1)： 179-189， (SCI: 000273470700021）
14. X. Cheng, Z.G. Wang, S. Kobayashi, K.Nakamoto, K. Yamazaki, Development of a computer assistant programming system for micro/nano milling tool fabrication by multi-axis Wire EDM, International Journal of Computer Integrated Manufacturing, 2009, 22(9), 847-856，（SCI: 000269658700003）
15. X. Cheng, Z.G. Wang, S. Kobayashi, K.Nakamoto, K. Yamazaki, Development of a six-axis wire electrical discharge machining machine for the fabrication of micro end mills, J. Engineering Manufacture, 2009, 223(2), 121-131,( SCI: 000264223700001)
16. X. Cheng, K. Nakamoto, M. Sugai, S. Matsumoto, Z.G. Wang, K. Yamazaki, Development of ultra-precision machining system with unique wire EDM tool fabrication system for micro/nano-machining, CIRP Annals -Manufacturing Technology (2008) , Volume 57, Issue 1, 2008, pp. 415-420， ( SCI: 000257153300100)
17. X. Cheng, Z.G. Wang, K. Nakamoto, K. Yamazaki, Design and development of micro polycrystalline ball end mill for micro/nano freeform machining of hard and brittle materials, J. Micromech. Microeng. 19 (2009) 115022, (SCI: 000270967800023)
18. Fei Wang, Xiang Cheng, Qianjian Guo, Xianhai Yang, Guangming Zheng, Experimental study on micromilling of thin walls, Journal of Micromechanics and Microengineering, 2018, 29: 015009, (SCI: 000452479600003)
19. X. Cheng, X.H. Yang, G.M. Zheng, R.F. Xu, L. Li, Study on the sticking materials on tools in micromilling of single crystalline silicon, International Journal of Manufacturing and Management, 2017, 31(5): 460-471. (EI: 20181004852136)
20. X. Cheng, H.Y. Liu, X.G. Yang, Y.M. Huang, G.M. Zheng, Study on the design techniques for energy-saving miniaturized machine tools for micromachining, Energy Education Science and Technology Part A: Energy Science and Research, 2014, 32(5): 3173-3182 (EI: 20150700516005)
21. Xiang Cheng, Xi Zhang, Junying Liu, Xianhai Yang, Zhongqiang Tian, Custom micro tooling for mechanical ductile-mode micro/nano machining of hard and brittle materials, Advanced Materials Research, 2012, 426: 20-23. (EI: 20120514722053)
22. Fei Wang, Xiang Cheng, Yuanyong Liu, Xianhai Yang, Fanjie Meng, Micromilling Simulation for the Hard-to-cut Material, Procedia Engineering 2017, 174: 693-699（EI：20171403543160）
23. Qiulian Sun, Xiang Cheng, Yuanyong Liu, Xianhai Yang, Yuanzhen Liu, Modeling and Simulation for Micromilling Mechanisms, Procedia Engineering 2017, 174: 760-766（EI：20171403543230）
24. Xiang Cheng, Xianhai Yang, Li Li, Junying Liu, Design of a three-axis desktop micro milling machine tool, 12th Conference on Machining and Advanced Manufacturing Technology, CMAMT 2013，2013.7.24-27，厦门， 735-739. （EI：20135117092570）
25. Cheng Xiang, Gao Bin, Liu Junying, Yang Xianhai, Study on the ductile-mode milling of brittle ceramics, 2nd International Conference on Mechatronics and Intelligent Materials, 2012.5.18-19, 桂林，3654-3657.( EI: 20121414924325)
26. Xiang Cheng, Junying Liu, Xianhai Yang, Zhongqiang Tian, Peng Jia, Study on the dedicated CAD sub-system for custom tooling, International Conference on Civil Engineering and Building Materials, 2011.7.29-31,昆明， 1930-1933. (EI: 20112714114187)
27. Xiang Cheng, Xi Zhang, Junying Liu, Zhongqiang Tian, Study on the preparation process for high accuracy micro machining by wire electrical discharge machining, 2011 International Conference on Computational Materials Science , 2011.4.17-18, 广州， 56-60. (EI: 20112914166252)
28. X. Cheng, Y.M. Huang, Workspace Generation of The 3-PRS parallel robot based on the NN, , The First International Conference on Machine Learning and Cybernetics (ICMLC 2002, Nov. 3-7), Beijing，China, Vol. 1-4: 2087-2089 （EI: 2003127407130）
29. X. Cheng, Y.M. Huang, Study on kinematic characteristics and singularities of a 3 dof parallel robot, The third International Conference on Machine Learning and Cybernetics (ICMLC 2004, Aug. 26-29), Shanghai，China, 2870-2873（EI: 2004458446951）
30. 程祥，李丽，黄玉美，杨先海，刘军营，多轴微细铣削机床的精度设计方法研究，工程设计学报，2013，20（2）：102-106
31. 程祥，杨先海，高斌，刘军营，田忠强，微细塑性铣削单晶硅实验研究，山东理工大学学报，2012，26（4）：53-60
32. 吕福顺，程祥，刘肖肖，郑光明，杨先海，PEEK的3D打印参数优化及铣削试验研究，组合机床与自动化加工技术，2018，3(3)： 38-44
33. 孙秋莲，程祥，田业冰，郑光明，王飞，微沟槽顶部毛刺宽度微细切削试验研究，组合机床与自动化加工技术，2018,8:53-56
34. 孙秋莲，程祥，杨先海，郑光明，刘原勇，赵国勇，微细铣削力对毛刺尺寸的影响规律研究，工具技术，2018,52（5）：42-46
35. 王飞，程祥，杨先海，郑光明，刘原勇，赵国勇，微型薄壁件的微细铣削机理与工艺研究，组合机床与自动化加工技术，2018,7:160-173
36. 孟繁杰，程祥，李元镇，杨先海，PMMA微细铣削实验工艺研究，机械设计与制造，2017,2:101-104
37. 刘肖肖，吕福顺，刘原勇，程祥，杨先海，一种增材与减材复合制造机研究，制造技术与机床，2017,10：49-52.
38. 吕福顺，刘肖肖，程祥，郑光明，杨先海，基于FDM的3D打印参数优化实验研究，组合机床与自动化加工技术，2017,9:114-121
39. 李元镇，程祥，孟繁杰，郑光明，徐汝锋，PMMA微细铣削参数优化实验研究，制造技术与机床，2016（2）：21-26
40. 国宪孟,程祥,张升,李贺,曾令国,基于Abaqus的正交切削仿真的有限元分析，机床与液压，2015,43（13）：134-141
41. 张升，程祥，微细铣削工艺参数优化实验研究，机械设计与制造，2014,5（1）：91-94
42. 代玉娟，程祥，杨先海，张升，微细切削性能有限元仿真分析，计算机仿真，2014,31（3）：243-247
43. 张升，程祥，杨先海，代玉娟，超精密桌面微细铣削机床的研制，机械设计与制造，2014,1（1）：110-112
44. 李贺，程祥，曾令国，基于nRF24L01芯片的进程无线通讯系统设计，现代电子技术，2014,37（15）：32-34
京公网安备 11010802027423号