近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Jiang, M. G.; Yan, H.; Chen, R. S, Enhanced mechanical properties due to grain refinement and texture modification in an AZ61 Mgalloy processed by small strain impact forging; MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Vol: 621 Pp: 204-211: JAN 5 2015
Luo, Jun; Yan, Hong; Chen, Rong-Shi; Effects of Gd concentration on microstructure, texture and tensile properties of Mg-Zn-Gd alloyssubjected to large strain hot rolling; MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Vol: 614 Pp: 88-95: SEP 22 2014
Wu, D.; Chen, R. S.; Ke, W; Microstructure and mechanical properties of a sand-cast Mg-Nd-Zn alloy; MATERIALS & DESIGN Vol: 58 Pp: 324-331: JUN 2014
Hou Danhui; Liang Songmao; Chen Rongshi; SOLIDIFICATION BEHAVIOR AND GRAIN SIZE OF SAND CASTING Mg-6Al-xZn ALLOYS; ACTA METALLURGICA SINICA ; Vol:: 50 No: 5 Pp: 601-609 ; : MAY 11 2014
Li, Jilin; Chen, Rongshi; Ma, Yuequn; Hot Tearing of Sand Cast Mg-5 wt.% Y-4 wt.% RE (WE54) Alloy; ACTA METALLURGICA SINICA-ENGLISH LETTERS Vol: 26 No: 6 Pp: 728-734; DEC 2013
Yan, H, Chen, RS, Zheng, N, et al., Effects of trace Gd concentration on texture and mechanical properties. Journal of Magnesium and alloys, Vol.1, No.1,2013, P23-30
Yan, H, Xu, SW, Chen, RS, et al., Activation of {10-12} twinning and slip in high ductile Mg-2.0Zn-0.8Gd rolled sheet with non-basal texture during tensile deformation at room temperature. Journal Of Alloys and Compound, Vol.566,No.25,2013,P98-107
Shi, BQ, Chen, RS, Ke, W, Effects of yttrium and zinc on the texture, microstructure and tensile properties of hot-rolled magnesium plates, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol.560, 2013, P62-70
Li, SQ, Tang, WN, Chen, RS, et al., Effect of Rolling Reduction on Microstructure and Mechanical Properties of Mg-9Gd-3Y-0.5Zr Alloys. Materials Science Forum, Vol.747-748,2013,P223-229
Li, JL, Ma, YQ, Chen, RS, et al., Effects of Shrinkage Porosity on Mechanical Properties of a Sand Cast Mg-Y-RE (WE54) Alloy. Materials Science Forum, Vol.747-748,2013,P390-397
Wu, D, Chen, RS, Tang, WN, et al., Influence of texture and grain size on the room-temperature ductility and tensile behavior in a Mg-Gd-Zn alloy processed by rolling and forging, Materials & Design, Vol.41,2012,P306-313
Shi, BQ, Chen, RS, Ke, W, Effects of forging processing on the texture and tensile properties of ECAEed AZ80 magnesium alloy, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol.546,2012,P323-327
Wu, D, Chen, RS, Han, EH, Serrated flow and tensile properties of a Mg-Gd-Zn Alloy, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, Vol.532,2012,P267-274
Song, YW, Shan, DY, Chen, RS, et al,. Corrosion resistance of Mg-8.8Li alloy compared with AZ91, Corrosion Engineering Science And Technology, Vol.46,No.6,2011,P719-723
Gao, L, Chen, RS, Han, EH, Thixoformability of a Mg-Gd-Y magnesium alloy and its mechanical properties, Materials Science and Technology, Vol.27, No.6, 2011, P1084-1091
Shi, BQ, Chen, RS, Ke, W, Effects of processing route on texture and mechanical properties of WZ62 alloy, Transactions of Nonferrous Metals Society of China, Vol.21, No.4, 2011, P830-835
Gao, L, Chen, RS, Han, EH, Enhancement of ductility in high strength Mg-Gd-Y-Zr alloy, Transactions Of Nonferrous Metals Society Of China, Vol.21,No.4,2011,P863-868
Gao, L, Zhou, J, Sun, ZM, Chen, RS, et al., First-principles calculations of the beta'-Mg7Gd precipitate in Mg-Gd binary alloys, Chinese Science Bulletin, Vol.56, No.11, 2011, P1142-1146
Gao, L, Zhou, J, Sun, ZM, Chen, RS, et al., Electronic origin of the anomalous solid solution hardening of Y and Gd in Mg: A first-principles study, Chinese Science Bulletin, Vol.56,No.10,2011, P1038-1042
Yan, H, Chen, RS, Han, EH, A comparative study of texture and ductility of Mg-1.2Zn-0.8Gd alloy fabricated by rolling and equal channel angular extrusion, Materials Characterization, Vol.62,No.3,2011,P321-326
京公网安备 11010802027423号