近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Mu, L. Z.,Gao, G.,Zhang, P. D.,Ji, C. J.,He, Y.,Li, X. Y.,Chi, Q. Z.,Yang, S. Q..Experimental and numerical study of the effect of pulsatile flow on wall displacement oscillati...[J],ACTA MECHANICA SINICA,2019,35(5):1120-1129
Li, Chunyang,Ji, Chunjun,Shi, Mao,Sun, Qi.Influence of rotor-stator component partition structure on the aerodynamic performance of centr...[J],ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS,2019,13(1):1080-1094
冀春俊,张雪薇,姚卡,房骏翌,刘君男,牛哲.基于NREC的新型氧气风机设计与流场分析[J],风机技术,2018,60(S1):1-6
Ji, Chunjun,Li, Chunyang,Fang, Junyi,Sun, Qi.Loss Mechanism of Static Interstage Components of Multistage Centrifugal Compressors for Integr...[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2018,2018
冀春俊,孙淼,徐浩,卜庆团,孙琦.离心压缩机扩压器进口流动研究[J],风机技术,2017,59(5):26-31
凌敬,季振勤,冀春俊,刘乾坤.叶栅稠度对多翼离心风机性能影响的研究[J],风机技术,2017,59(3):29-33
冀春俊,徐浩,孙琦,孙淼.基于Kriging模型的快速拆装叶轮轮盘多目标优化设计[J],风机技术,2017,59(3):44-48
张阳,冀春俊,刘雷,张守立,朱少辉,林琳,孙卉.径向导叶与空间导叶的优劣分析与试验[J],热科学与技术,2017,16(5):425-430
冀春俊.基于 Kriging 模型的快速拆装叶轮轮盘多目标优化[J],风机技术,2017,59(3):41-45
冀春俊.离心压缩机叶片扩压器进口安装角对流动的影响[A],2017,D2017005
Sun, Qi,Ji, Chunjun,Fang, Junyi,Li, Chunyang,Zhang, Xiaolin.Optimization Design of IGV Profile in Centrifugal Compressor[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2017,2017
冀春俊,冀文慧,孙琦,高亚威.基于ANSYS的离心风机叶轮结构优化研究[J],风机技术,2016,6:49-52
冀文慧,冀春俊,孙琦,赵宝德,徐养卓.系列化双吸硫酸风机通用蜗壳的设计及性能分析[J],风机技术,2016,58(2):42-46
冀春俊,孙琦,范朝阳,孙淼,冀文慧.离心压缩机进口导叶叶型的进一步研究[J],热科学与技术,2016,15(5):386-390
Ji, Chunjun,Sun, Qi,Fan, Zhaoyang,Gao, Yawei,Zhao, Baode.Study of high efficiency flow regulation of VIGV in centrifugal compressor[J],International Journal of Rotating Machinery,2016,2016
冀春俊,那淼,孙玉莹,李秀刚.高马赫数离心压缩机模型级叶轮叶型优化[J],风机技术,2015,57(2):37-41,47
冀春俊,高健,冀文慧,李秀刚.压缩机进气室优化设计改进[J],风机技术,2014,6:39-43
王清,冀春俊,董闯,王英敏,张瑞谦,郭晓雷.高强铁素体时效不锈钢成分设计[J],材料热处理学报,2014,35(4):72-77
冀春俊,赵宝德,冀文慧,孙琦.泵导叶出口宽度改型设计的变工况计算及实验研究[J],热科学与技术,2014,13(1):81-86
冀春俊,刘洋,武斌.回流器冲角对于压缩机模型级性能影响的研究*[J],风机技术,2013,4:11-16
于晶晶,王清,李晓娜,石尧,董闯,冀春俊,徐香明.基于团簇结构模型的镍基高温合金成分设计[J],材料热处理学报,2013,34(8):184-188
冀春俊,赵宝德,龚绍海,王平,张阳.基于CFD的超临界锅炉给水泵变工况模拟及轴向力预测[J],水泵技术,2013,03:22-26
冀春俊,张阳,冀文慧,范朝阳.某离心式压缩机可调进口导叶叶型研究[J],热科学与技术,2013,12(2):131-134
Wang, Qing,Wang, Yingmin,Qiang, Jianbing,Dong, Chuang,Ji, Chunjun.beta-Ti Alloys with Low Young's Moduli Interpreted by Cluster-Plus-Glue-Atom Model[J],METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,2013,44A(4):1872-1879
王清,李晓娜,冀春俊,董闯.Designing Multi-Component b-Ti Alloys with Low Young’s Modulus[A],2013,747(2):885-889
王清,冀春俊,王英敏,羌建兵,董闯.b-Ti Alloys with Low Young’s Moduli Interpreted by Cluster-Plus-Glue-Atom Model[J],Metal. Mater. Trans. A,2013,44(4):1872-1879
刘恩雪,王清,马仁涛,查钱锋,冀春俊,董闯.低Nb含量Ti-Mo-Nb-Zr-Sn BCC低弹性模量固溶体合金的成分设计[J],中国有色金属学报,2012,22(12):3378-3385
王清,查钱锋,刘恩雪,董闯,王学军,谭朝鑫,冀春俊.基于团簇模型的高强度马氏体沉淀硬化不锈钢成分设计[J],金属学报,2012,48(10):1201-1206
Li, Baozeng,Wang, Qing,Wang, Yingmin,Zuo, Liqiang,Qiang, Jianbing,Li, Xiaona,Ji, Chunjun,Guo, Xiaolei,Dong, Chuang.A ferrite stainless steel Cr27Mo6Al3Cu with oxidation resistance[J],MATERIALS & DESIGN,2012,40:171-175
Wang, Qing,Zhang, Xiangdong,Li, Xiaona,Ji, Chunjun,Dong, Chuang.Designing Multi-Component beta-Ti Alloys with Low Young's Modulus[A],2012,747-748:885-+
Li, Baozeng,Wang, Yingmin,Qiang, Jianbing,Dong, Chuang,Gu, Junjie,Wang, Qing,Ji, Chunjun.Cluster formula of Fe-containing Monel alloys with high corrosion-resistance[J],MATERIALS CHARACTERIZATION,2012,68:94-101
冀春俊,李彩华,庸洪杰.叶片断裂破坏与气动非定常脉动的关联分析[J],风机技术,2012,2:9-11,41
冀春俊,高国红,张守立,张鑫太.混流泵叶轮的水利设计方法研究[J],水泵技术,2012,1:23-27
Li, Baozeng,Wang, Qing,Wang, Yingmin,Li, Chunyan,Qiang, Jianbing,Ji, Chunjun,Dong, Chuang.Cu-Containing Fe-Ni Corrosion-Resistant Alloys Designed by a Cluster-Based Stable Solid Solutio...[J],METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,2012,43A(2):544-554
冀春俊,李晓庆,余道刚.增压器压气机流动分析与全工况优化[J],流体机械,2012,40(1):26-30,21
Ji, Chunjun,Zhou, Qi.Study of The Interference Between The Diffuser Vanes With The Volute Tongue[A],2011,455-456:1037-1041
Ji Chun-jun,Li Xiao-qing.Aerodynamic Optimization Design of a Turbocharger Compressor Impeller[A],2011,455-456:389-394
Ji C.,Wang Y..The design and flow simulation of the volute casing of a mixed flow pump[A],2011,2:820-823
裴威,冀春俊,王学军,么立新.闭式小流量模型级无叶扩压器改进设计[J],风机技术,2011,2:3-5,49
冀春俊.Study of the Interference Between The Diffuser Vanes with The Volute Tongue[A],2011,377-379
冀春俊.The Numerical Analysis on Nox Emissions of Gas Turbine Combustor[A],2011,373-376
冀春俊.Aerodynamic Optimization Design of a Turbocharger Compressor Impeller[A],2011,369-372
Wang P.,Ji C.,Tang B.,Song X..Effect of common rail system on vehicle engine combustion performance[A],2010,1:464-467
刘艳,李宇峰,冀春俊.600MW空冷汽轮机组低压排汽缸流场模拟和结构优化[J],汽轮机技术,2010,52(5):329-332
冀春俊,甄咏鹏,王澄宇,刘卫兵.核电站余热排出泵导叶的设计探索[J],水泵技术,2010,03:28-31
冀春俊,王澄宇,刘卫兵,范苏月.压气机失速研究及设计方法的讨论[J],内燃机与动力装置,2010,2:1-4
冀春俊,宋风强,甄咏鹏.喷淋泵诱导轮内部流动的数值分析[J],四川兵工学报,2010,31(3):71-74
王平,冀春俊,唐斌,宋希庚.Effect of Common Rail Vehicle Engine Combustion Performance[A],2010,1:464-467
王博珺,赵衡,庞志梅,郎肖,冀春俊.后置导叶对斜流泵性能的影响及分析[J],水泵技术,2009,06:28-31
冀春俊,王宇.离心压缩机末级扩压器与排气蜗壳集成优化[J],风机技术,2009,6:3-6,25
吴东坡,陈健,王立博,陈曦,冀春俊.离心压缩机级间抽气结构优化设计[J],风机技术,2009,5:34-38
刘艳,李宇峰,冀春俊.60万千瓦空冷汽轮机组低压排汽缸流场模拟和结构优化[A],2009,1-7
冀春俊,王杨,冀文慧.压缩机旋转失速发展传播的计算分析[J],热能动力工程,2009,24(3):291-295
冀春俊,王雅君,王学军,么立新.离心压缩机排气蜗壳内部流动分析与优化[J],机械工程学报,2009,45(5):311-316
冀春俊,王宇.离心压缩机末级最佳D4/D2值的数值研究[J],流体机械,2009,37(4):14-17,8
冀春俊,刘赫,陈曦.叶片扩压器对小流量模型级性能的影响[J],风机技术,2009,1:8-9,12
冀春俊,任建新.燃气轮机回流式燃烧室内部流动数值分析[A],2009,1-5
冀春俊,任建新.燃气轮机回流式燃烧室内两相流动数值模拟及分析[J],热科学与技术,2008,7(4):349-353
冀春俊,刘丰庆,余道刚.压缩机中间抽气结构优化设计[J],热能动力工程,2008,23(6):591-594
Ji Chunjun,Yu, Wang.NUMERICAL STUDY OF THE MATCHING OF THE VOLUTE WITH THE LAST STAGES CENTRIFUGAL COMPRESSOR[A],2008,10(PART B):1363-1372
冀春俊,王杨.压缩机首级非定常流动计算分析[A],2008,1-6
冀春俊,李佳娜,王学军,赵衡.离心压缩机级间加气的出口流场特性[J],西安交通大学学报,2008,42(3):273-276,285
冀春俊.NUMERICAL STUDY OF THE MATCHING OF THE VOLUTE WITH THE LAST STAGES CENTRIFUGAL COMPRESSOR[A],2008,10:1363-1372
冀春俊,张鹏刚.应用CFD技术解决轴流压缩机放空管路振动噪声问题[J],风机技术,2007,5:59-62
Ji, Chunjun,Wang, Yajun,Yao, Lixin.Numerical analysis and optimization of the volute in a centrifugal compressor[A],2007,1352-1356
冀春俊,周子筠.电站给水泵汽轮机头部流场的数值计算与结构改进[J],热能动力工程,2007,22(5):500-503
冀春俊,陈曦,么立新.小流量模型级扩压器对性能影响的研究[J],风机技术,2007,4:8-11
么立新,冀春俊.离心式压缩机小流量级分析与优化设计[J],风机技术,2006,3:18-22
冀春俊,崔海涛.汽轮机通流部分数值模拟与分析[A],2005,Vol.25:4
冀春俊,陈曦,张英姿.入口角对等离子体煤气化反应率的影响研究[A],2005,Vol.25:5
冀春俊,肖蕾.离心压缩机小流量级扩压器的分析与优化[J],风机技术,2005,2:15-17
冀春俊,周民,周子筠.轴向涡流燃烧器内部流动数值分析[J],热科学与技术,2005,4(1):67-71
冀春俊,徐世泊,于飞.燃气轮机燃烧室内部两相流动数值模拟与结构优化[J],动力工程,2004,24(5):698-702
张鹏刚,冀春俊.离心式压缩机模型级流场的数值模拟研究[A],2004,195-199
冀春俊,肖蕾.小流量离心压缩机内部流动数值分析与优化[A],2004,200-205
冀春俊,徐世泊.燃气轮机燃烧室内部流场的冷态模拟与优化设计[J],热科学与技术,2004,3(2):139-142
冀春俊,安邦贤,孙晋.压气机进气弯管流场的计算与分析[J],内燃机车,2003,3:7-10,13
冀春俊,孙晋,张英姿.等离子体煤气化反应器内部流动数值模拟及设计优化的初步研究[J],煤化工,2002,30(3):17-22
沈胜强,冀春俊,陈冰,Abuliti Abudula.有扰流片的矩形通道内空气流动和传热过程的数值模拟[J],热科学与技术,2002,1(1):20-23
冀春俊,闫清,孙晋.压气机旋转失速数值模拟和流动显示[J],大连理工大学学报,2001,41(5):561-567
京公网安备 11010802027423号