近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]Gong, Wenzheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu.A high-strength electrospun PPESK fibrous membrane for lithium-ion battery separator[J],POLYMER BULLETIN,2019,76(10):5451-5462
[2]龚文正,谷俊峰,阮诗伦,申长雨.静电纺丝制备高强度聚偏氟乙烯锂离子电池隔膜[J],高分子材料科学与工程,2019,35(3):148-155
[3]张黎,王新宇,李征,谷俊峰,阮诗伦,申长雨.熔融沉积3D打印材料粘接强度及模量预测研究[J],化工学报,2019,70(7):2727-2736
[4]Gong, Wenzheng,Wang, Xinyu,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu.A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion battery separator[J],HIGH PERFORMANCE POLYMERS,2019,31(8):948-958
[5]龚文正,常保宁,阮诗伦,申长雨.静电纺丝聚芳醚砜酮纤维膜穿刺强度研究[J],材料工程,2019,47(4):32-38
[6]Li, Zheng,Wang, Xinyu,Ruan, Shilun,Li, Zhaojun,Shen, Changyu,Zeng, Yan.A modified hypervolume based expected improvement for multi-objective efficient global optimization method[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,58(5):1961-1979
[7]Chang, Baoning,Wang, Xinyu,Long, Zhiqiang,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu.Constitutive modeling for the accurate characterization of the tension behavior of PEEK under small strain[J],POLYMER TESTING,2018,69:514-521
[8]龚文正,周晶晶,阮诗伦,申长雨.静电纺丝与静电喷雾技术共纺制备PPESK/PVDF复合锂电池隔膜[J],材料工程,2018,46(3):1-6
[9]Li, Zheng,Wang, Xinyu,Gu, Junfeng,Ruan, Shilun,Shen, Changyu,Lyu, Yan,Zhao, Yang.Topology Optimization for the Design of Conformal Cooling System in Thin-wall Injection Molding Based on BEM[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,94(1-4):1041-1059
[10]Zhang, Huanhuan,Wang, Songjie,Zhang, Shaoyuan,Ma, Ruixue,Wang, Yaming,Cao, Wei,Liu, Chuntai,Shen, Changyu.Crystallization behavior of poly(lactic acid) with a self-assembly aryl amide nucleating agent probed by real-time infrared spectroscopy and X-ray diffraction[J],POLYMER TESTING,2017,64:12-19
[11]肖博升,王新宇,李征,谷俊峰,阮诗伦,申长雨.基于修正Archard模型的聚醚醚酮磨损数值模拟[J],工程塑料应用,2017,45(9):88-92,104
[12]Wang, Yaming,Wang, Yu,Lin, Qing,Cao, Wei,Liu, Chuntai,Shen, Changyu.Crystallization behavior of partially melted poly(ether ether ketone) Influence of pre-crystallization conditions[J],JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY,2017,129(2):1021-1028
[13]Zhang, Huanhuan,Shao, Chunguang,Kong, Weili,Wang, Yaming,Cao, Wei,Liu, Chuntai,Shen, Changyu.Memory effect on the crystallization behavior of poly(lactic acid) probed by infrared spectroscopy[J],EUROPEAN POLYMER JOURNAL,2017,91:376-385
[14]Gong W.,Song B.,Ruan S.,Shen C..A novel PPESK fibrous membrane separator based on electrospinning technique for lithium-ion battery[A],75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017,2017,2017-May:132-137
[15]Wang, Xinyu,Li, Hongxia,Gu, Junfeng,Li, Zheng,Ruan, Shilun,Shen, Changyu,Wang, Minjie.Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing Warpage of Injection Molded Products[J],POLYMERS,2017,9(3)
[16]宋贝贝,龚文正,李宗蔚,阮诗伦,申长雨.静电纺无纺纤维膜与单根纤力学关系的研究[J],化工新型材料,2017,45(12):149-151
[17]宋贝贝,龚文正,李宗蔚,阮诗伦,杨春秋,申长雨.工艺参数对静电纺PPESK微纳米纤维膜性能的影响[J],工程塑料应用,2016,44(11):44-47
[18]宋崇鑫,宋贝贝,龚文正,阮诗论,申长雨.同轴静电纺碳纳米管增强聚芳醚砜酮[A],中国第四届静电纺丝大会(CICE 2016),2016,1
[19]宋贝贝,龚文正,宋崇鑫,阮诗论,申长雨.孔隙率对静电纺丝正交试验优化结果的影响[A],中国第四届静电纺丝大会(CICE 2016),2016,1
[20]龚文正,宋贝贝,宋崇鑫,阮诗伦,申长雨.静电纺丝制备高强度PPESK锂离子电池隔膜[A],中国第四届静电纺丝大会(CICE 2016),2016,1
[21]Li, Zheng,Ruan, Shilun,Gu, Junfeng,Wang, Xinyu,Shen, Changyu.Investigation on parallel algorithms in efficient global optimization based on multiple points infill criterion and domain decomposition[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(4):747-773
[22]Wang, Xinyu,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu,Wang, Xicheng.Reducing service stress of the injection-molded polycarbonate window by optimizing mold construction and product structure[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,86(5-8):1691-1704
[23]Liu, Wenjuan,Wang, Xinyu,Li, Zheng,Gu, Junfeng,Ruan, Shilun,Shen, Changyu,Wang, Xicheng.Integration optimization of molding and service for injection-molded product[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,84(9-12):2019-2028
[24]王新宇,李征,谷俊峰,阮诗伦,申长雨,王希诚.工程用高聚物注塑成型制品服役应力优化设计[J],化工学报,2016,67(7):3040-3046
[25]阮诗伦,杨春秋,申长雨.工艺参数对静电纺PPESK 微纳米纤维膜性能的影响[J],工程塑料应用,2016,67(67):44-47
[26]王新宇,李征,谷俊峰,阮诗伦,申长雨.Reducing service stress of the injection molded polycarbonate window by optimizing mold construction and products structure[J],The International Journal of Advanced Manufacturing Technology,2016,86(5):1691-1704
[27]Chang, Baobao,Wang, Bo,Zheng, Guoqiang,Dai, Kun,Liu, Chuntai,Shen, Changyu.Tailoring Microstructure and Mechanical Properties of Injection Molded Isotactic-Polypropylene via High Temperature Preshear[J],POLYMER ENGINEERING AND SCIENCE,2015,55(12):2714-2721
[28]Wang, Yaming,Liu, Lulu,Li, Ming,Cao, Wei,Liu, Chuntai,Shen, Changyu.Spectroscopic analysis of post drawing relaxation in poly(lactic acid) with oriented mesophase[J],POLYMER TESTING,2015,43:103-107
[29]Wang, Xinyu,Gu, Junfeng,Shen, Changyu,Wang, Xicheng.Warpage optimization with dynamic injection molding technology and sequential optimization method[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,78(1-4):177-187
[30]Li, Yilong,Dai, Kun,Zhao, Junhui,Li, Ning,Zheng, Guoqiang,Liu, Chuntai,Chen, Jingbo,Shen, Changyu.Liquid-Sensing Behaviors of Carbon Black/Polypropylene and Carbon Nanotubes/Polypropylene Composites: A Comparative Study[J],POLYMER COMPOSITES,2015,36(2):205-213
[31]Wang, Yaming,Zhang, Huanhuan,Li, Ming,Cao, Wei,Liu, Chuntai,Shen, Changyu.Orientation and structural development of semicrystalline poly(lactic acid) under uniaxial drawing assessed by infrared spectroscopy and X-ray diffraction[J],POLYMER TESTING,2015,41:163-171
[32]刘文娟,王新宇,李征,谷俊峰,王希诚,申长雨.基于Kriging代理模型的注塑件残余应力优化分析[J],塑料工业,2015,43(1):53-57
[33]Xu, Yanmei,Wang, Yaming,Xu, Ting,Zhang, Jingjing,Liu, Chuntai,Shen, Changyu.Crystallization kinetics and morphology of partially melted poly(lactic acid)[J],POLYMER TESTING,2014,37:179-185
[34]Wang, Yaming,Xu, Yanmei,He, Dongran,Yao, Wen,Liu, Chuntai,Shen, Changyu."Nucleation density reduction" effect of biodegradable cellulose acetate butyrate on the crystallization of poly(lactic acid)[J],MATERIALS LETTERS,2014,128:85-88
[35]申长雨.航天服头盔面窗设计制造的进展与思考[A],第十一届先进成型与材料加工技术国际研讨会,2014,8-10
[36]王雪,谷俊峰,王希诚,申长雨.外激励场作用下聚乙烯力学性能的分子动力学模拟研究[A],第十一届先进成型与材料加工技术国际研讨会论文集中国机械工程学会,2014,187-190
[37]刘文娟,王新宇,李征,谷俊峰,王希诚,申长雨.基于Kriging代理模型的注塑制品成型中的残余应力优化[A],第十一届先进成型与材料加工技术国际研讨会,2014,142-146
[38]Wu, Shasha,Wang, Bo,Zheng, Guoqiang,Liu, Shuangyang,Dai, Kun,Liu, Chuntai,Shen, Changyu.Preparation and characterization of macroscopically electrospun polyamide 66 nanofiber bundles[J],MATERIALS LETTERS,2014,124:77-80
[39]Xu, Ting,Wang, Yaming,Xu, Yanmei,Cao, Wei,Liu, Chuntai,Shen, Changyu.Crystallization behavior and nucleation analysis of isotactic polypropylene with a multiamide nucleating agent[J],POLYMER TESTING,2014,36:62-68
[40]Zheng, Haili,Wang, Bo,Zheng, Guoqiang,Wang, Zhigang,Dai, Kun,Liu, Chuntai,Shen, Changyu.Study on Crystallization Kinetics of Partially Melting Polyethylene Aiming To Improve Mechanical Properties[J],INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH,2014,53(14):6211-6220
京公网安备 11010802027423号