近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
研討會論文
1.鄭明傑，宋震國，“以分子動力學模擬飛秒雷射剝蝕製作奈米微結構製程” 第27屆中國機械工程師協會，國立台北科技大學，99年12月10~11日，台北。
2.L. K. Chen, Y. M. Hung, and C. K. Sung, “Profile control for patterning glass microlens array by imprinting process,” 23nd International Microprocesses and Nanotechnology Conference (MNC 2010), Fukuoka, Japan, November 9-12, 2010.
3.Y. M. Hung, C.Y. Huang, T. H. Lu and C. K. Sung, “Observation of Imprinting Process Using Particle Image Velocimetry, “ 23nd International Microprocesses and Nanotechnology Conference (MNC 2010), Fukuoka, Japan, November 9-12, 2010.
4.Tai-Pang An, Je-Wei Lin, and Cheng-Kuo Sung, “A study on the surface property of Anti-adhesion coating for nanoimprint molds using atmosphere pressure plasma jet system,” 23nd International Microprocesses and Nanotechnology Conference (MNC 2010), Fukuoka, Japan, November 9-12, 2010.
5.鄭明傑，宋震國，“以飛秒雷射製作奈米級光柵微結構” 第34屆全國力學會議，國立雲林科技大學，99年11月19~20日，斗六。
6.Ming-Chieh Cheng and Cheng-Kuo Sung, “ Fabrication of metallic wire grating by femtosecond laser ablation,” International Forum on Micro Manufacturing 2010, Gifu, Japan, Oct. 20-23, 2010.
7.Chien-Li Wu, David Mikolas, Chien-Chung Fu, Cheng-Kuo Sung, “Fabrication of Wire Grid Polarizer for Visible Spectrum by Lift-off Process,” The 9th International Conference on Nanoimprint and Nanoprint Technology (NNT 2010), Oresund & Copenhagen, October 13-15, 2010.
8.Ming-Chieh Cheng and cheng-Kuo Sung, “Fabrication of reflective microlens by imprinting technology – A molecular dynamics simulation study,” The 9th International Conference on Nanoimprint and Nanoprint Technology, Oresund & Copenhagen, October 13-15, 2010
9.Chia-Meng Chen, Tai-Pang An, Yu-Min Hung and Cheng-Kuo Sung, “Fabricating insertion structure for metallic wire grid polarizers by nanoimprint and CMP process,” 36th International Conference on Micro&Nano Engineering (MNE2010),Genoa, Italy, September 19 – 22, 2010.
10.Ming-Chieh Cheng and Cheng-Kuo Sung, “Fabrication Sub-10nm Metallic Wire Grating with Carbon Nanotube,” The 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, Aug. 1st ~ 5th, 2010.
11.C. H. Lu and C. K. Sung, “Dynamic Analysis of A Hula-hoop System,” ASME, 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2010), Istanbul, Turkey, July 12–14, 2010.
12.Ming-Chieh Cheng and Cheng-Kuo Sung, “Fabrication of metallic wire grating by femtosecond laser ablation – a molecular dynamics simulation study,” ASME, 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2010), Istanbul, Turkey, July 12–14, 2010.
13.Chia-Meng Chen, Tai-Pang An and Cheng-Kuo Sung, “Fabricating Insertion Structure for Metallic Wire Grid Polarizer by Nanoimprint and Polishing,” 第八屆兩岸三地先進製造技術研討會，國立台灣大學,，99年4月26~27日，台北。
14.Ming-Chieh Cheng and Cheng-Kuo Sung, “The exploration of carbon nanotube as cellular probe – A study by molecular dynamics simulation,” 2nd International Conference on Drug Discovery and Therapy, Dubai, AUE, Feb. 1st ~ 4th, 2010.
15.Ming-Chieh Cheng and Cheng-Kuo Sung, “Fabrication of Sub-10nm wire grating by carbon nanotube – A molecular dynamics simulation study,” The 6th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Feb. 20 – 23, Kaohsiung, Taiwan (Accepted)
SCI期刊論文
1.L. K. Chen, Y. M. Hung, and C. K. Sung, “In situ visualization of imprinting process for patterning microstructures on glass substrate,” Japanese Journal of Applied Physics, Vol. 49, n 6 PART 2, pp. 06GL141-06GL145, 2010. (1.138)
2.F. C. Teng, F. T. Wu, C. C. Cheng, and C. K. Sung, “Design and Analysis of Packaging Boxes for Flat Panel Display,” IEEE Transactions on Advanced Packaging, Vol. 33, No. 1, pp. 106-114, 2010. (1.122)
3.Chia-Meng Chen and Cheng-Kuo Sung, “Fabricating Metallic Wire Grating Inside a Polymeric Substrate by Insertion Nanoimprint,” Microelectronic Engineering. Vol. 87, pp. 872-875, 2010. (1.488)
4.Chung Han Yao, Chih Hang Chang, and Cheng-Kuo Sung, “Effects of Mold Shape and Sidewall Roughness on Nanoimprinting Formation by Molecular Dynamics Simulation,” Microelectronics Engineering, Vol. 87, pp. 864-868, 2010. (1.488)
5.David Lie and Cheng-Kuo Sung, “Synchronous Brake Analysis for a Bicycle,” Mechanism and Machine Theory, Vol. 45(4), pp. 543-554, 2010. (1.407)
6.Yu-Jen Wang, Chung-De Chen, and Cheng-Kuo Sung, “Design of a Frequency-Adjusting Device for Harvesting Energy from a Rotating Wheel,” Sensors & Actuators: A. Physical, Vol. 159, Issue: 2, pp. 196-203, 2010. (1.674)
7.Eileen Chih-Ying Yang, Paul C.-P. Chao, and Cheng-Kuo Sung, “Optimal Control of an Under-actuated System for Landing with Desired Postures,” IEEE Transactions on Control Systems Technology, Vol. PP, No. 99, pp.1-8, 2010. (1.858)
8.De Shin Liu, Chin Yuan Tsai, Ying Ti Lu, Cheng Kuo Sung, and Cho Liang Chung, “Finite Element Method Investigation into Nanoimprintingof Aluminum/Polyimide Bi-layer Substrates,” Microelectronic Engineering, Vol. 87, pp. 2361-2367, 2010.(1.488)
9.C. H. Yao, H. Y. Hsiung, C. K. Sung, 2009, “Influences of process parameters and mold geometry on direct nanoimprint,” Microelectronic Engineering, Vol. 86, pp. 665 – 668.
10.Y. M. Hung, Y. J. Lu and C. K. Sung, 2009, “Microstructure patterning on glass substrate by imprinting process,” Microelectronic Engineering, Vol. 86, pp. 577 – 582.
11.Yi-Ling Yang, Paul C.-P. Chao, and Cheng-Kuo Sung, 2009, “Optimal Control of an Under-Actuated System for Landing at Desired Postures,” IEEE Transactions on Control Systems Technology. (n press)
12.Yi-Ling Yang, Paul C.-P. Chao, and Cheng-Kuo Sung, 2009, “Landing Posture Control for a Generalized Twin-body System Using Methods of Input-output Linearization and Computed Torque,” IEEE/ASME Transactions on Mechatronics, Vol. 14, No. 3, pp. 326 – 336.
13.David Lie and Cheng-Kuo Sung, 2009, “Synchronous Brake Analysis for a Bicycle,” Mechanism and Machine Theory. (in press)
14.F. C. Teng, F. T. Wu, C. C. Cheng and C. K. Sung, 2009, “Design and Analysis of Packaging Boxes for Flat Panel Display,” IEEE Transactions on Advanced Packaging. (in press)
15.Chia-Meng Chenand Cheng-Kuo Sung, 2009, “Fabricating Metallic Wire Grating Inside a Polymeric Substrate by Insertion Nanoimprint,” Microelectronic Engineering. (in press)
16.Yu-Jen Wang, Chung-De Chen, and Cheng-Kuo Sung, 2009, “Design of a Frequency- Adjusting Device for Harvesting Energy from a Rotating Wheel,” Sensors & Actuators: A. Physical. (in press)
17.C. X. Lu, C. C. Wang, C. K. Sung, and Paul C. P. Chao, 2009, “Dynamic Analysis of a Motion Transformer Mimicking a Hula Hoop, ASME Journal of Vibration and Acoustics. (in revision)
18.L. K. Chen, Y. M. Hung, and C. K. Sung, 2009, ”In-situ Error Estimation of Microstructure Patterning on Glass Substrate by Imprinting Process, Japanese Journal of Applied Physics. (submitted)
19.T. C. Chan, C. K. Sung, and Paul C. P. Chao, “Effect of Ball/Race Materials on Positioning of Balls in an Automatic Balancer,” Journal of Sound and Vibration. (submitted)
20.Chung Han Yao, Chih Hang Chang,and Cheng-Kuo Sung, 2009, “Effects of Mold Shape and Sidewall Roughness on Nanoimprinting formation by Molecular Dynamics Simulation,” Microelectronics Engineering. (in press)
21.T-L. Chang, C.H. Yao, C-C. Chen, C.K. Sung, 2009, “Efficiency Enhancement Organic Photovoltaic Cells Fabricated by Nanoimprint Process,” Microelectronics Engineering. (in press)
22.Yao CH, Wu CL, Sung CK, "Grain size effect on nanopattern formability in direct imprint," JAPANESE JOURNAL OF APPLIED PHYSICS Volume: 47 Issue: 6 Pages: 5185-5188 Part: Part 2 Published: JUN 2008
23.Yao CH, Wu CL, Sung CK, “Effects of thin film properties on metallic pattern formation by direct nanoimprint,” JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Volume: 201 Issue: 1-3 Pages: 765-769 Published: MAY 26 2008
24.C. H. Yao, M. H. Cheng, and C. K. Sung, 2008, “Double Layer Thin Film Fabrication for Reducing Direct Imprinting Force,” Japanese Journal of Applied Physics. (in press)
25.Cheng MC, Sung CK, and Wang WH, “The effects of thin-film thickness on the formaton of metallic patterns by direct nanoimprint,” JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Volume: 191 Issue: 1-3 Special Issue: Sp. Iss. SI Pages: 326-330 Published: 2007
26.Chao PCP, Sung CK, Wu ST, and Huang JS, “Nonplanar modeling and experimental validation of a spindle-disk system equipped with an automatic balancer system in optical disk drives,” MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS Volume: 13 Issue: 8-10 Pages: 1227-1239 Published: 2007
27.Hsieh CW, and Sung CK, “Atomic-scale friction in direct imprinting process: Molecular dynamics simulation,” JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS Volume: 46 Issue: 9B Special Issue: Sp. Iss. SI Pages: 6387-6390 Published: 2007
28.Cheng MC, Hsiung HY, Lu YT , and Sung CK, “The effect of metal-film thickness on pattern formation by using direct imprint,” JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS olume: 46 Issue: 9B Special Issue: Sp. Iss. SI Pages: 6382-6386 Published: 2007
29.Ho JR, Shih TK, Cheng JWJ, Sung CK, and Chen CF, “A novel method for fabrication of self-aligned double microlens arrays,” SENSORS AND ACTUATORS A-PHYSICAL Volume: 135 Issue: 2 Pages: 465-471 Published: 2007
30.Hsieh CW, Hsiung HY, Lu YT, Sung CK, and Wang WH, “Fabrication of subwavelength metallic structures by using a metal direct imprinting process,” JOURNAL OF PHYSICS D-APPLIED PHYSICS Volume: 40 Issue: 11 Pages: 3440-3447 Published: 2007
31.B. C. Yu, Paul C. -P. Chao, and C. K. Sung, 2006, “Nonlinear Dynamic Effects of Damping Washers on the Performance of Automatic Ball Balancers in Optical Disc Drives,” International Journal of Nonlinear Sciences and Numerical simulation, Vol. 7(3), pp. 275 –278.
32.Ming-Chieh Cheng, Yun-liang Hsueh, Hsung-Yu Chen, and Cheng-Kuo Sung, 2006, “Length Effect on Formation of Metallic Patterns by Nanoimprinting Process – Molecular Dynamic Simulation,” Materials Science Forum, Vol. 505 –507, pp. 133 – 138
33.Jin-Ray Hsu, Chih-Chung Hsiao, Cheng-Kuo Sung , and Chaug-Liang Hsu, 2006, “Thermo-mechanical Effect on Nanostructure Formation Using Atomic Force Microscopy,” Materials Science Forum, Vol. 505 –507, pp. 151 –156.
34.Shiang-Kuo Chang-Jian, Jeng-Rong Ho, J. –W. John Cheng , and Cheng-Kuo Sung, 2006, “Fabrication of Carbon Nanotube Field Emission Cathodes in Patterns by Laser Transfer Method,” Nanotechnology, Vol. 17, pp. 1184-1187.
京公网安备 11010802027423号