近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
近5年发表的SCI收录论文[1-18]
[1] K. Ye, M. Li, J. Luo, B. Wu, and L. Lai, "The H2O dissociation and Hydrogen evolution performance of monolayer MoS2 containing single Mo vacancy: A theoretical study*," IEEE Transactions on Nanotechnology, vol. 19, pp. 163-167, 2020.
[2] K. Ye, L. Lai, M. Li, J. Luo, B. Wu, and Z. Ren, "Strain Effect on the Hydrogen Evolution Reaction of VMo-SLMoS2," IEEE Transactions on Nanotechnology, vol. 19, pp. 192-196, 2020.
[3] R. wang, H. Pang, M. Li, and L. Lai, "Atomic Simulation of Nanoindentation on the Regular Wrinkled Graphene Sheet," materials, vol. 13, no. 5, p. 1127, 2020.
[4] H. pang, H. wang, M. Li, and C. Gao, "Atomic-Scale Friction on Monovacancy-Defective Graphene and Single-Layer Molybdenum-Disulfide by Numerical Analysis," nanomaterials, research no. 10, p. 87, 2020.01 2020.
[5] C. Yin et al., "Untethered microgripper-the dexterous hand at microscale," Biomedical Microdevices, vol. 21, no. 4, p. 82, 2019/08/15 2019.
[6] H. Pang, P. Huang, W. Zhuo, M. Li, C. Gao, and D. Guo, "Hysteresis and its impact on characterization of mechanical properties of suspended monolayer molybdenum-disulfide sheets," Physical Chemistry Chemical Physics, 10.1039/C8CP07158F vol. 21, no. 14, pp. 7454-7461, 2019.
[7] M. Li, W. Zhuo, H. Pang, and L. Lai, "Improving the atomic-resolution AFM imaging of monolayer MoS2 for worn tips: a molecular dynamics study," Japanese Journal of Applied Physics, vol. 58, no. 5, p. 055003, 2019/04/12 2019.
[8] W. Wang, C. Yang, L. Bai, M. Li, and W. Li, "First-Principles Study on the Structural and Electronic Properties of Monolayer MoS2 with S-Vacancy under Uniaxial Tensile Strain," Nanomaterials, vol. 8, no. 2, p. 74, 2018.
[9] W. Wang, L. Bai, C. Yang, K. Fan, Y. Xie, and M. Li, "The Electronic Properties of O-Doped Pure and Sulfur Vacancy-Defect Monolayer WS2: A First-Principles Study," Materials, vol. 11, no. 2, p. 218, 2018.
[10]H. Pang, M. Li, C. Gao, L. Lai, and W. Zhuo, "Characterization of Frictional Properties of Single-Layer Molybdenum-Disulfide Film Based on a Coupling of Tip Radius and Tip–Sample Distance by Molecular-Dynamics Simulations," Nanomaterials, vol. 8, no. 6, p. 387, 2018.
[11]H. Pang et al., "Phase Transition of Single-Layer Molybdenum Disulfide Nanosheets under Mechanical Loading Based on Molecular Dynamics Simulations," Materials, vol. 11, no. 4, p. 502, 2018.
[12]W. Wang et al., "Plasticity resulted from phase transformation for monolayer molybdenum disulfide film during nanoindentation simulations," Nanotechnology, vol. 28, no. 16, p. 164005, 2017.
[13]M. Li, H. Huang, L. Tu, W. Wang, P. Li, and Y. Lu, "Abnormal nonlocal scale effect on static bending of single-layer MoS 2," Nanotechnology, vol. 28, no. 21, p. 215706, May 2017.
[14]M. Li, J. Hu, Y. Wan, H. Huang, J. Luo, and W. Wang, "Atomic simulation of thermal fluctuation (ripples) in constrained single-layer MoS2 membranes," Computational Materials Science, vol. 131, pp. 286-292, 4/15/ 2017.
[15]W. Wang, L. Li, C. Yang, and M. Li, "Molecular dynamics study on the relaxation properties of monolayer MoS2 nanoribbons," Acta Phys Sin, vol. 65, no. 16, pp. 160201-160201, 2016.
[16]M. Li, Y. Wan, L. Tu, Y. Yang, and J. Lou, "The Effect of VMoS3 Point Defect on the Elastic Properties of Monolayer MoS2 with REBO Potentials," Nanoscale Research Letters, vol. 11, no. 1, p. 155, Mar 2016.
[17]M. Li, Y. Wan, J. Hu, and W. Wang, "Molecular dynamics simulation of effects of temperature and chirality on the mechanical properties of single-layer molybdenum disulfide," Acta Phys Sin, vol. 65, no. 17, pp. 176201-176201, 2016-09-05 2016.
[18]Y. Yang et al., "Quantification and Promotion of Interfacial Interactions between Carbon Nanotubes and Polymer Derived Ceramics," Carbon, vol. 95, pp. 964-971, 2015.
近5年发表的EI收录论文[19-24]
[19]K. Ye, M. Li, J. Luo, B. Wu, and L. Lai, "Activating inert basal plane of MoS2 for H2O dissociation and HER via formation of vacancy defects: A DFT study*," in 2019 IEEE 19th International Conference on Nanotechnology (IEEE-NANO), 2019, pp. 48-53.
[20]L. Lai, K. Ye, M. Li, J. Luo, B. Wu, and Z. Ren, "Prediction of Strain Effect on Hydrogen Evolution Reaction on VMO-SLMOS2*," in 2019 IEEE 19th International Conference on Nanotechnology (IEEE-NANO), 2019, pp. 193-196.
[21]H. Ye, M. Zhao, M. Li, and W. Wang, "Influences of ambient temperature, charge density on wettability properties of monolayer MoS2 films " in Nano/Micro Engineered and Molecular Systems (NEMS), 2017 IEEE 12th International Conference on, Los Angeles, CA, USA, 2017, pp. 595-598: IEEE.
[22]M. Li, Y. Wan, and W. Wang, "Prediction of mechanical properties for defective monolayer MoS2 with single molybdenum vacancy defects using molecular dynamics simulations," in 2017 IEEE 17th International Conference on Nanotechnology (IEEE-NANO), 2017, pp. 9-12.
[23]M. Li, J. Luo, and W. Wang, "Compare investigation of lithiation, sodiation, and magnesiation ion adsorptions and diffusions on monolayer MoS2 for energy storages using first-principles," in 2017 IEEE 17th International Conference on Nanotechnology (IEEE-NANO), 2017, pp. 196-199.
[24]M. Li, H. Huang, and W. Wang, "Bending and vibration of monolayer MoS2 beams by molecular dynamics simulations," in Nano/Micro Engineered and Molecular Systems (NEMS), 2017 IEEE 12th International Conference on, Los Angeles, CA, USA 2017, pp. 583-586.: IEEE
近5年发表的其他论文[25-30]
[25]许婧, 罗静, and 李明林, "以第一性原理研究单层二硫化钼压电特性," 福州大学（自然科学版）, vol. 47, pp. 477-488, 2019年8月 2019.
[26]涂莉萍, 李明林, 万亚玲, and 王卫东, "单层二硫化钼的力学性能及缺陷工程研究进展," 机械制造与自动化, no. 2, 2018.
[27]沈磊 and 李明林, "移动分体式垃圾压缩站举升机构优化设计与强度分析," 机械制造与自动化, vol. 1, p. 028, 2018.
[28]李明林 and 沈磊, "两类典型垃圾压缩站举升机构动力学仿真优化," 机械设计与制造, no. 5, pp. 153-157, 2017.
[29]朱华诞 and 李明林, "含空位缺陷的碳纳米锥拉伸力学特性研究," 机械制造与自动化, no. 5, p. 4, 2016.
[30]陈越 and 李明林, "碳纳米管质量传感器振动特性研究," 机械制造与自动化, vol. 44, no. 5, pp. 171-175, 2015.
京公网安备 11010802027423号