近期论文
查看导师最新文章
(温馨提示:请注意重名现象,建议点开原文通过作者单位确认)
1. Li, X.W.*, (2013): Monotonic and Cyclic Deformation in Single Crystal. In: The Encyclopedia of Tribology (Chapter No. 248), p. 2313-2323. eds. Q. Jane Wang and Yip-Wah Chung, Springer Science+Business Media, New York 2013. (invited)
2. Shi, F., Tian, P.C., He, Z.H., Jia, N., Qi, Y., Liu, C.M. and Li, X.W.*, (2016): Improving Intergranular Corrosion Resistance in a High-Nitrogen Austenitic Stainless Steel Through Grain Boundary Character Distribution Optimization. Corros. Sci., 107, No. 6, 49-59.
3. Ji, H.M., Jiang, Y., Yang, W., Zhang, G.P. and Li, X.W.* (2015): Biological Self-Arrangement of Fiber Like Aragonite and Its Effect on Mechanical Behavior of Veined rapa whelk Shell. J. Am. Ceram. Soc., 98, No. 10, 3319-3325.
4. Ji, H.M., Zhang, W.Q., Wang, X. and Li, X.W.* (2015): Three-Point Bending Fracture Behavior of Single Oriented Crossed-Lamellar Structure in Scapharca broughtonli Shell. Materials, 8, No. 9, 6154-6162.
5. Wang, B, Duan, Q.Q., Yao, G., Pang, J.C., Zhang, Z.F., Wang, L. and Li, X.W.* (2015): Fatigue Fracture Behavior of Spot Welded Hot-stamped Steels under Tensile-Shear Load. Fat. Fract. Eng. Mater. Struct., 38, No. 8, 914-922.
6. Qin, X.M., Liu, Y.*, Li, X.W.*, Xu, J.C., Chi, B.Q., Zhai, D. and Zhao, X.L. (2015): Origin of Dirac Cones in SiC Siligraphene: A Combined Density Functional and Tight-Binding Study. J. Phys. Chem. Lett., 6, 1333-1339.
7. Shao, C.W., Shi, F., and Li, X.W.* (2015): Cyclic Deformation Behavior of Fe-18Cr-18Mn-0.63N Nickel-Free High Nitrogen Austenitic Stainless Steel. Metall. Mater. Trans. A, 46, No. 4, 1610-1620.
8. Ji, H.M. and Li, X.W.* (2014): Microstructural Characteristic and Its Relation to Mechanical Properties of Clinocardium californiense Shell. J. Am. Ceram. Soc., 97, No. 12, 3991-3998.
9. Li, X.W.*, Peng, N., Wu, X.M.. and Wang, Z.G. (2014): Plastic-Strain-Amplitude Dependence of Dislocation Structures in Cyclically Deformed <112>-Oriented Cu-7at.%Al Alloy Single Crystals. Metall. Mater. Trans. A, 45, 3835-3843.
10. Zhang, X., Li, X.W.*, Li, J.G. and Sun, X.D. (2014): Preparation and Properties of a Novel Biodegradable 3D Porous Magnesium Scaffold for Bone Tissue Engineering. Mater. Sci. Eng. C, 42, 362-367.
11. Ji, H.M., Zhang, W.Q. and Li, X.W.* (2014): Fractal Analysis of Microstructures-Related Indentation Toughness of Clinocardium californiense Shell. Ceram. Inter., 40, No. 5, 7627-7631.
12. Yan, Y., Lu, M., Guo, W.W. and Li, X.W.* (2014): Effect of Pre-fatigue Deformation on the Thickness-Dependent Tensile Behavior of Coarse-Grained Pure Aluminum Sheets. Mater. Sci. Eng. A, 600, 99-107.
13. Zhang, X., Li, X.W.*, Li, J.G. and Sun, X.D. (2014): Preparation and Characterizations of Bioglass Ceramic Cement/Ca-P Coating on Pure Magnesium for Biomedical Applications. ACS Appl. Mater. Interface, 6, No. 1, 513-525.
14. Li, X.W.*, Wang, X.M., Guo, W.W., Qi, C.J. and Yan, Y. (2013): Effect of Cyclic Pre-deformation on the Uniaxial Tensile Deformation Behavior of [017] Copper Single Crystals Oriented for Critical Double Slip. Metall. Mater. Trans. A, 44, No. 4, 1631-1635.
15. Yan, Y.*, Jin. W. and Li, X.W.* (2013): Texture Development in the Ni47Ti44Nb9 Shape Memory Alloy during Successive Thermo-Mechanical Processing and Its Effect on Shape Memory and Mechanical Properties. Metall. Mater. Trans. A, 44, No. 2, 978-989.
16. Li, X.W.*, and Umakoshi, Y. (2012): Dislocation Structures in a Cyclically Deformed Single-Slip-Oriented Fe-35wt.%Cr Alloy Single Crystal Containing Fine Cr-Rich Precipitates. Metall. Mater. Trans. A, 43, No. 13, 5038-5047.
17. Jiang, Q.W. and Li, X.W.* (2012): Effect of Pre-annealing Treatment on the Compressive Deformation and Damage Behavior of Ultrafine-grained Copper. Mater. Sci. Eng. A, 546, No. 1, 59-67.
18. Yun, J.G., Ma, C.Q., Yi, J.J. and Li, X.W.* (2012): Qualitative and Quantitative Characterizations of Fracture Surfaces of AL6XN Super-Austenitic Steel Fatigued at Different Stress Amplitudes. Prog. Nat. Sci.: Mater. Inter., 22, No. 1, 48-52.
19. Yang, W., Zhang, G.P., Liu, H.S. and Li, X.W.* (2011): Microstructural Charaterization and Hardness Behavior of a Biological Saxidomus Purpuratus Shell. J. Mater. Sci. Tech., 27, No. 2, 139-146.
20. Yang, W., Zhang, G.P., Zhu, X.F., Li, X.W. and Meyers, M.A. (2011): Structure and Mechanical Properties of Saxidomus Purpuratus Biological Shells. J. Mech. Behav. Biomed. Mater., 4, 1514-1530.
学术兼职
(1) 中国材料研究学会理事
(2) 中国材料研究学会疲劳分会理事
(3) 国际SCI杂志Journal of Materials Science and Technology (JCR: Q1) 编委
(4) 担任20余种国内外知名SCI和EI杂志的审稿专家(如:ACS Appl. Mater. Interfaces, Acta Biomater., Scripta Mater., Phil Mag., Phil. Mag. Lett., MSE-A, MSE-C, FFEMS, JMST, PNS-MI, 中国科学E辑、科学通报、物理学报、金属学报、材料研究学报、中国有色金属学报、功能材料等)
(5) 美国国家科学基金会(NSF)国际研究计划项目、荷兰材料基础研究基金会(FOM)项目的国际评审专家