近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
BZ Yin, JG Liu, B Peng, MR Zhou, BC Liu, XL Ma, CM Wang, P Wen, Y Tian, YF Zheng, Influence of layer thickness on formation quality, microstructure, mechanical properties, and corrosion resistance of WE43 magnesium alloy fabricated by laser powder bed fusion, Journal of Magnesium and Alloys, DOI:10.1016/j.jma.2022.09.016
JG Liu, BZ Yin, F Song, BC Liu, B Peng, P Wen, Y Tian, YF Zheng, XL Ma, CM Wang, Improving corrosion resistance of additively manufactured WE43 magnesium alloy by high temperature oxidation for biodegradable applications, Journal of Magnesium and Alloys, DOI: 10.1016/j.jma.2022.08.009
Shuyuan Min, Chaoxin Wang, Bingchuan Liu, Jinge Liu, Yu Liu, Zehao Jing, Yan Cheng, Peng Wen, Xing Wang, Yufeng Zheng, Yun Tian. The biological properties of 3d-printed degradable magnesium alloy WE43 porous scaffolds via the oxidative heat strategy, International Journal of Bioprinting, online
Aobo Liu, Bangzhao Yin, Di Zhang, Peng Wen, Microstructure, mechanical and electrochemical properties of wire-arc additively manufactured duplex stainless steel, Science and Technology of Welding and Joining, DOI: 10.1080/13621718.2022.2151766
Zhengguang Wang, Bingchuan Liu, Bangzhao Yin, Yufeng Zheng, Yun Tian, Peng Wen. Comprehensive review of additively manufactured biodegradable magnesium implants for repairing bone defects from biomechanical and biodegradable perspectives, Frontiers in Chemistry, DOI: 10.3389/fchem.2022.1066103
DD Xia, Y Qin, H Guo, P Wen, H Lin, M Voshage, JH Schleifenbaum, Y Cheng, YF Zheng. Additively manufactured pure zinc porous scaffolds for critical-sized bone defects of rabbit femur, Bioactive Materials, 2023(19): 12-13
BC Liu, XC Li, WP Qiu, ZJ Liu, F Zhou, YF Zheng, P Wen, Y Tian, Mechanical Distribution and New Bone Regeneration After Implanting 3D Printed Prostheses for Repairing Metaphyseal Bone Defects: A Finite Element Analysis and Prospective Clinical Study, Frontiers in Bioengineering and Biotechnology, 2022, 10(7): 921545
Y Qin, AB Liu, H Guo, YN Shen, P Wen, H Lin, DD Xia, M Voshage, Y Tian, YF Zheng. Additive manufacturing of Zn-Mg alloy porous scaffolds with enhanced osseointegration: in vitro and in vivo studies, Acta Biomaterialia, 2022(145): 403-415
JG Liu, BC Liu, SY Min, BZ Yin, B Peng, ZS Yu, CM Wang, XL Ma, P Wen, Y Tian, YF Zheng. Biodegradable magnesium alloy WE43 porous scaffolds fabricated by laser powder bed fusion for orthopedic applications: process optimization, in vitro and in vivo investigation, Bioactive Materials, 2022 (16): 301-319
Qin Y, Yang H, Liu A, Dai J, Wen P, Zheng Y, Tian Y, Li S, Wang X. Processing optimization, mechanical properties, corrosion behavior and cytocompatibility of additively manufactured Zn-0.7Li biodegradable metals. Acta Biomaterialia, 2022 (142): 388-401
Liu Jinge, Wen Peng, Metal vaporization and its influence during laser powder bed fusion process, Materials & Design 2022 (215): 110505
Zhang Di, Liu Aobo, Yin, Bangzhao, Wen Peng, Additive manufacturing of duplex stainless steels-A critical review, Journal of Manufacturing Processes, 2022(73): 496-517
Boce Xue, Baohua Chang, Shenghua Wang, Runshi Hou, Peng Wen, Dong Du, Humping formation and suppression in high-speed laser welding, Materials, 2022(1): 2420
Liu Jinge, Yin Bangzhao, Sun Zhaorui, Wen Peng, Zheng Yufeng, Tian Yun, Hot cracking in ZK60 magnesium alloy produced by laser powder bed fusion process, Materials Letters, 2021(301): 130283
Zhang, Di, Wen, Peng, Yin, Bangzhao, Liu, Aobo, Temperature evolution, phase ratio and corrosion resistance of duplex stainless steels treated by laser surface heat treatment, Journal of Manufacturing Processes, 2021(62): 99-107
Qin, Yu, Liu, Jinge, Chen, Yanzhe, Wen, Peng, Zheng, Yufeng, Tian, Yun, Voshage, Maximilian, Schleifenbaum, Johannes Henrich, Influence of Laser Energy Input and Shielding Gas Flow on Evaporation Fume during Laser Powder Bed Fusion of Zn Metal, Materials, 2021(14): 2677
Y. Qin, P. Wen, D. Xia, H. Guo, M. Voshage, L. Jauer, Y. Zheng, J.H. Schleifenbaum, Y. Tian, Effect of grain structure on the mechanical properties and in vitro corrosion behavior of additively manufactured pure Zn, Additive manufacturing, 2020, 33: 101134
Y. Qin, P. Wen, M. Voshage, Y. Chen, P.G. Schückler, L. Jauer, D. Xia, H. Guo, Y. Zheng, J.H. Schleifenbaum, Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: Formation quality, microstructure and mechanical properties, Materials & Design, 2019, 181: 107937.
Y. Qin, P. Wen, H. Guo, D. Xia, Y. Zheng, L. Jauer, R. Poprawe, M. Voshage, J.H. Schleifenbaum, Additive manufacturing of biodegradable metals: Current research status and future perspectives, Acta biomaterialia, 2019, 98: 3-22.
P Wen, Y Qin, YZ Chen, Voshage M, L Jauer, R Poprawe, JH Schleifenbaum. Laser additive manufacturing of Zn porous scaffolds: shielding gas flow, surface quality and densification, Journal of Materials Science & Technology, 2019, 35: 368-376
Y. Chen, P. Wen, M. Voshage L. Jauer, R. Poprawe, J.H. Schleifenbaum, Laser additive manufacturing of Zn metal parts for biodegradable implants: Effect of gas flow on evaporation and formation quality, Journal of Laser Applications, 2019, 31: 022304.
P. Wen, D. Yelkenci, J. Chen, B. Chang, D. Du, J. Shan, Numerical analysis of the effect of welding positions on formation quality during laser welding of TC4 titanium alloy parts in aerospace industry, Journal of Laser Applications, 2019, 31: 022308
P Wen, Voshage M, L Jauer, YZ Chen, Y Qin, R Poprawe, JH Schleifenbaum. Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties. Materials & Design, 2018, 155: 36-45
P Wen, L Jauer, Voshage M, YZ Chen, R Poprawe, JH Schleifenbaum. Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants. Journal of Materials Processing Technology, 2018, 258: 128-137
P Wen, Y Song. Numerical simulation and process optimization of laser surface treatment on duplex stainless steel, Journal of Laser Applications, 2018, 30: 032504
P Wen, G Wang, YZ Chen. Effect of laser scanning and powder addition on microstructure and mechanical properties for hot-wire-feed laser additive manufacturing, Journal of Laser Applications, 2017, 29: 022302
C Zhang, P Wen, YM Yuan, XJ Fan. Evaluation and Optimal Design of Supersonic Nozzle for Laser-assisted Oxygen Cutting of Thick Steel Sections, International Journal of Advanced Manufacturing Technology, 2016, 86: 1243-1251
C Zhang, P Wen, ZH Yao, YM Yuan, XJ Fan. Visualization of flow separation inside cut kerf during laser cutting of thick sections, Journal of Laser Applications, 2016, 28: 022204
P Wen, JG Shan, SQ, Zheng, G Wang. Control of wire transfer behaviors in hot wire laser welding, International Journal of Advanced Manufacturing Technology, 2016, 83: 2091-2100
P Wen, ZH Feng, SQ Zheng. Formation quality optimization of laser hot wire cladding for repair martensite precipitation hardening stainless steel. Optics and Laser technology, 2015, 65: 180-188
P Wen, ZP Cai, ZH Feng, G Wang. Microstructure and mechanical properties of hot wire laser clad layers for repair precipitation hardening martensitic stainless steel, Optics and Laser Technology, 2015, 75: 207-213
P Wen, YQ.Zhang and WZ.Chen: Quality detection and control during laser cutting progress with coaxial visual monitoring, Journal of Laser Applications, 2012, 24( 3): 032006
K Shinozaki, P Wen, M Yamamoto, K Kadoi, Y Kohno, T Komori. Effect of grain size on solidification cracking susceptibility of type 347 stainless steel during laser welding. Quarterly Journal of the Japan Welding Society, 2011, 29(3): 90-94
P Wen, M. Yamamoto, T. Tamura, S. Senda, K. Shinozaki: Study on solidification cracking of laser dissimilar welded joints by using in-situ observation and numerical simulation, Welding in the World, 2010, 54(9-10): R257-R266
YQ. Zhang, P Wen, JG. Shan, YQ.Shuang, WZ.Chen: Evaluation criterion and closed-loop control of penetration status during laser-MIG hybrid welding, Journal of Laser Applications, 2010, 22(3):92-98
P Wen. The introduction of my experience in Japan as a foreign student. Journal of the Japan Welding Society, 2010, 79(4): 35-37
P Wen, K. Shinozaki, M. Yamamoto, T. Tamura and N. Nemoto: In-situ observation of solidification cracking of laser dissimilar welded joints, Quarterly Journal of Japan Welding Society, 2009(2): 134-138
P Wen, K. Shinozaki, M. Yamamoto, T. Tamura and N. Nemoto: Prediction of solidification cracking by in-situ observation and 3d fem-analysis, Quarterly Journal of the Japan Welding Society, 2009(2): 139-143
K. Shinozaki, M. Yamamoto, P. Wen and T. Tamura: Prediction of occurrence of solidification cracking in weld metal, Journal of the JWS, 2008, 77(4), 20-25
P Wen, Zheng Shiqing, Feng Zhenhua. Prediction of wire transfer behaviors in laser hot wire welding. China welding, 2014, 23(1):12-18
尹浜兆,刘金戈,刘冰川,彭勃,温鹏,田耘,郑玉峰,王彩梅,马小林,裴浩同, WE43镁合金激光粉末床熔融工艺研究, 中国激光, 2022, 14(49): 1402107
张迪,赵琳,刘奥博, 温鹏, 激光能量对激光焊接接头熔化形状、气孔和微观组织的影响及其调控方法, 中国激光, 2021, 48: 1502005
郑玉峰,夏丹丹,谌雨农,刘云松,徐钰倩,温鹏,田耘,赖毓霄, 增造可降解金属医用植入物, 金属学报, 57(2021): 1499-1520
尹浜兆,秦瑜,温鹏,郑玉峰,田耘, 激光粉末床熔融制备金属骨植入物, 中国激光, 2020, 47(11): 8-25.
陈俊宏, 温鹏, 常保华, 单际国, 程昊.钛合金清洗及对激光焊接气孔的影响.中国机械工程, 2020, 31(6): 1-5
东峰, 陈俊宏, 温鹏, 常保华, 单际国. 钛合金激光立焊烧穿和气孔缺陷及其数值模拟, 焊接学报, 2019, 40(1): 10-14
温鹏, R Poprawe, 赵海燕. 研究生课程混合式教学新实践-基于翻转课堂和远程教学的中德联合授课, 清华大学教育研究, 2019, 40(12): 15-18
温鹏, 邬瑞峰, 王秀义, 安吉, 王小龙, 张炎. 不锈钢车体搭接接头激光非熔透焊接工艺及其拉剪性能, 中国机械工程, 2017, 28 (11) :1355-1361
温鹏,郑世卿,单际国,冯振华. 激光热丝焊电阻热控制及送丝参数优化. 焊接学报, 2015, 36(9): 17-20
温鹏,冯振华,郑世卿. 激光热丝焊表面修复成形质量分析和控制. 焊接学报, 2015, 36(5): 21-24
郑世卿,温鹏,单际国. 激光热丝焊接过程焊丝过渡行为及其稳定性的研究. 中国激光, 2014, 41(4): 0403008
温鹏,王威,谭向虎,单际国,王旭友, 林尚扬. 激光能量和辅助气体对切割能力影响的数值模拟. 焊接学报, 2013, 34(4): 57-60
郑世卿,温鹏,单际国. 激光热丝焊焊缝熔合比和焊缝深度方向的微观成分均匀性. 焊接学报, 2012, 33(12): 45-48
郑世卿,温鹏,单际国. 球铁光纤激光-MIG复合焊接头的裂纹倾向与力学性能. 焊接学报, 2012, 33(8): 29-32
温鹏,荻崎贤二,山本元道. 奥氏体不锈钢激光焊接过程中残留液体金属的在线观察. 焊接学报, 2012, 33(3): 53-56
温鹏,单际国,邱志雄,张斌.大功率机车车轮材料微观组织对对性能的影响. 金属热处理, 2012, 37(5): 6-10
温鹏,单际国,曹志晓,张斌. 大功率机车车轮材料滑动摩擦磨损的试验研究, 钢铁研究学报, 2011, 23(11): 41-46
温鹏,获崎贤二,山本元道. 环形结构激光焊接凝固热裂纹的实验研究和数值模拟. 金属学报, 2011, 47(10): 1241-1245
温鹏,郑世卿,荻崎贤二,山本元道. 填充热丝激光窄间隙焊接的实验研究. 中国激光, 2011, 38(11): 1103004(1-6)
温鹏,获崎贤二,山本元道. 激光焊接过程中残留液体金属的高速高倍在线观察. 金属学报, 2011, 47(3): 305-310
温鹏,荻崎贤二,山本元道. 基于在线观察的激光焊接凝固热裂纹敏感性研究. 中国激光, 2011, 38(6): 0603005(1-6)
温鹏, 张旭东, 陈武柱, Henry Peng: 薄板激光焊时失稳变形及其控制, 焊接学报, 2006年, 27(9)
京公网安备 11010802027423号