样式: 排序: IF: - GO 导出 标记为已读
-
Protective role of DTPA against Hylotrupes bajulus L. infestations by targeting metal ion incorporation in larval mandibles Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-25 Roberto D. Martínez, Milagros Casado, Luis-Alfonso Basterra
-
Characterization of randomly oriented strand boards manufactured from juvenile wood of underutilized wood species Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-23 Tomáš Pipíška, Marek Nociar, Pavel Král, Jozef Ráheľ, Pavlo Bekhta, Roman Réh, Ľuboš Krišťák, Miroslav Jopek, Barbora Pijáková, Rupert Wimmer, Milan Šernek
-
Quantification of stress relaxation in a timber fastening system: a railway focused study Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-22 Rahat Mahmud Khan, Marcus S. Dersch, Alison C. Dunn
-
A Fully Coupled Numerical Model for Unbonded Post-tensioned Timber Structures Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-16 A. Ersin Dinçer, Abdullah Demir
-
Study on vibration performance and comfort of glulam beam and deck floor Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-15 Yifan Zhang, Changqing Miao, Zheng Wang, Zhaodong Xu
-
Comparative durability tests of preservative-treated and chemically modified wood – Assessment and classification on the basis of different decay tests Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-13 Christian Brischke, Susanne Bollmus, Lukas Emmerich
-
Trichoderma atrobrunneum associated with yellow stain defect of cork planks and critical values of TCA for wine cork stoppers industry Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-12 Sandra Veloso, Ana Magro, Joana Henriques, Luís Bonifácio, José Pedro Fernandes, Ana Paula Ramos, Eugénio Diogo, Helena Bragança
-
Understanding the termite resistance of Malaysian commercial bamboo for various applications Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-12 Roszaini Kadir, Muhammad Al-Amin Abd. Hamid
-
Potential applications for eco-friendly wood preservative of the extracts of thermally degraded cobs and stalks of corn Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-08 Kailong Li, Dongxuan Huang, XinQi Gao, Jiexun He, Xiaoyu Sun, Li Yan
-
Use of carbonated cellulose micro/nanofibrils in the coating of sack kraft paper Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-08 Lorran de Sousa Arantes, Adriano Reis Prazeres Mascarenhas, Ianca Oliveira Borges, Rafael Carvalho do Lago, Carlos Henrique da Silva, Murilo Daniel de Mello Innocentini, Lourival Marin Mendes, Gustavo Henrique Denzin Tonoli
-
Tropical mobola plum (Parinari Curatellifolia): a full characterization of wood and bark within the scope of biorefineries Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-08 Abílio Malengue, Ana Lourenço, Helena Patrício, Ricardo A. Costa, Teresa Quilhó, Jorge Gominho
-
On the mode I and II failure of three Cameroonian hardwoods with orthotropy rate evaluation Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-05 Hervice Kouefouet, Jeanne Sandrine Mabekou, Rostand Moutou Pitti, Pierre Kisito Talla
-
The impact of temperature variations on the thermal and charring characteristics of laminated bamboo lumber Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-02 Zhaoyan Cui, Ming Xu, Yurong Shen, Liuhui Tu
The fire performance of buildings can be assessed through the thermal and charring characteristics of laminated bamboo lumber (LBL), due to its combustibility properties, which are akin to those of wood. This study employed Thermal Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), and Hot Disk techniques to ascertain the thermal conductivity, heat flow, and mass loss rate of LBL
-
Evaluation of the bonding process and interlaminar shear properties of hybrid cross-laminated timber prepared with larch and OSB Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-04-01 Ming-yue Li, Hai-qing Ren
-
Experimental study of hybrid pine-birch glued-laminated timber beams assisted by digital image correlation technique Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-03-19 Cristian Timbolmas, Rafael Bravo, Francisco J. Rescalvo, Andreas Ringhofer, Raimund Sieder, Jose Lorenzana
-
Manufacturing bamboo spur gears and assessing dynamic performance Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-03-16 Shinji Ochi
-
Maximizing bolaina wood utilization: extraction of cellulose nanofibers from sawdust waste Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-03-14
Abstract This study focuses on the utilization of bolaina sawdust waste from the Peruvian Amazon for the production of cellulose nanofibers (CNFs). Bolaina is known for its rapid growth and extensive wood usage, which generate significant amounts of sawdust waste. The objective of this research was to physicochemically study this biomass source and the conversion of this waste into valuable nanocellulosic
-
Using machine learning as an adaptive controller framework for optimizing properties of particleboard Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-03-13
Abstract Fine adjustment of manufacturing parameters as a function of the experience of the technical manpower plays a vital role in any production line. The objective of this study was to propose an adaptive controller framework to improve the overall accuracy of the parameters regulating particleboard manufacturing. This framework has four main steps: (1) In the data gathering process, the production
-
Comparison of classical beam theory and finite element modelling of timber from fibre orientation data according to knot position and loading type Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-03-09 Guillaume Pot, Robin Duriot, Stéphane Girardon, Joffrey Viguier, Louis Denaud
-
The utilization of an olfactory machine in wood identification demonstrates a promising prospect: discerning disparities in emission profiles of volatile organic compounds between Picea abies and Pinus sylvestris Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-03-07 Alireza Nikoutadbir, Asghar Tarmian, Seyed Saeid Mohtasebi, Seyed Morteza Mohtasebi, Reza Oladi
-
Monitoring climatic impacts on the moisture uptake of the first Swiss wildlife bridge made of wood Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-03-05 Karim Ghazi Wakili, Marcus Schiere, Sébastien Bonifacio, Ulrich Kauz, Jan Maurer, Lukas Rüegsegger, Andreas Müller
-
Effect of moisture content, heating time and temperature on the bending mechanical properties of Phyllostachys iridescens Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-02-24 Xuehua Wang, Junjie Zhu, Yong Zhong, Fengbo Sun, Benhua Fei
-
Pressure agglomeration of raw, milled and cut-milled pine and poplar shavings: assessment of the compaction process and agglomerate strength Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-02-22 Paweł Tryjarski, Aleksander Lisowski, Jakub Gawron
-
Fungal resistance of Hevea brasiliensis (rubberwood) treated with nano-ZnO and nano-CuO dispersed linseed oil and paraffin wax nanoemulsion Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-02-17 Richa Bansal, N. Mamatha, Rakesh Kumar, Krishna K. Pandey
-
Kraft lignin biorefinery: from pulping side streams to concrete plasticizers Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-02-15 Caio César Zandonadi Nunes, Higor Brandão de Paula, Iara Fontes Demuner, Marcos Oliveira de Paula, Leonardo Gonçalves Pedroti, Ana Márcia Macedo Ladeira Carvalho
-
Experimental and numerical study on the mechanical behavior of curved glulam structures Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-02-14 Shixing Zhao, Jingxian Zhao, Hongbo Liu, Fei He, Shuheng Yang, Zhihua Chen
-
Utilizing pyrolysis cleavage products from softwood kraft lignin as a substitute for phenol in phenol-formaldehyde resins for modifying different wood species Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-02-09 Johannes Karthäuser, Vladimirs Biziks, Daniel Roggatz, Holger Militz
-
SO2-alcohol-water (SAW) fractionation of Eldar pine (Pinus eldarica): effects of alcohol type on pulp and paper properties Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-02-04 Aliasghar Tatari, Mohammadreza Dehghani Firouzabadi, Ali Ghasemian
-
Effect of wood moisture content and adhesive open time on the adhesion strength of wet bonded Pinus radiata wood Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-28 Jesse Favis, Bruno Monteiro Balboni, C. Brand Wessels
-
Comparative investigation on viscoelastic and mechanosorptive creep behavior of two tropical hardwoods and one temperate softwood Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-02-01 Martian Asseko Ella, Giacomo Goli, Claude Feldman Pambou Nziengui, Joseph Gril, Eric Fournely, Rostand Moutou Pitti
-
A study of resin removal and fixation of radiata pine wood by microwave-superheated steam treatment Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-19 Huimin Cao, Saisai Huang, Fan Zhou, Xin Gao, Songlin Yi, Yongdong Zhou
-
Biological durability and moisture dynamics of untreated and thermally modified poplar Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-18 Xiuping Jiang, Jan Van den Bulcke, Liselotte De Ligne, Joris Van Acker
-
Basalt grid reinforcement of wood-based panels Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-12 Aaron Kilian Mayer, Carsten Mai
-
Heat release rate of oriented strand board through cone calorimetry test: a numerical analysis Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-12 Saad Sulttan, Hafezeh Nabipour, Sohrab Rohani
-
Photo-stabilization effect of extractives on the photo-degradation of Red pine (Pinus koraiensis Sieb. et Zucc.) Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-11 Hui Peng, Hongchen Yu, Tianyi Zhan, Jiali Jiang, Jianxiong Lyu
-
Modification of plywood with phenol–formaldehyde resin: substitution of phenol by pyrolysis cleavage products of softwood kraft lignin Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-05 Johannes Karthäuser, Salomé Raskop, Maik Slabohm, Holger Militz
-
Heartwood proportion and density of Tectona grandis L.f. wood from Brazilian fast-growing plantations at different ages Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-05
Abstract The high demand for teak wood has driven efforts to achieve increased volumetric production in fast-growing plantations. However, the logs often exhibit higher proportions of sapwood and juvenile wood. This study was conducted to investigate how the age of teak trees in commercial plantations influences the heartwood proportion, wood density, and formation of mature wood. A total of 12 trees
-
Effective strategy for fabricating surface impregnated and unilaterally densified wood with furfuryl alcohol/flame retardants for enhanced mechanical performance and flame retardancy Eur. J. Wood Prod. (IF 2.6) Pub Date : 2024-01-02
Abstract The widespread utilization of fast-growing plantation timber in furniture and building construction is often hindered by defects such as insufficient mechanical strength, dimensional instability, and flammability. In this work, an effective and simple approach was presented to enhance the performance of fast-growing poplar wood, through surface impregnation with a mixed solution of biomass-derived
-
Laminated strand lumber (LSL) potential of Hungarian and Central European hardwoods: a review Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-27 K. M. Faridul Hasan, Miklós Bak, Ahmed Altaher Omer Ahmed, József Garab, Péter György Horváth, László Bejó, Tibor Alpár
-
Wood properties of mature loblolly pine grown in Hawaii, North Carolina, and Mississippi: impacts of climate conditions on specific gravity and chemical composition Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-22 Thomas L. Eberhardt, Keonhee Kim, Nicole Labbé, Lisa J. Samuelson
-
Assessing the deformation energy of timber-to-timber inclined screw connections via computed tomography scan Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-22
Abstract Inclined screws represent a typical connection solution for timber structures. They can provide higher capacity and stiffness due to the combined axial-shear interaction. This paper investigates the effect of engineering wood products choice (glued-laminated timber and cross-laminated timber), fibre inclination, friction, and interlayers on the capacity and deformation energy of timber-to-timber
-
Information fusion technology for terahertz spectra and hyperspectral imaging in wood species identification Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-21
Abstract This paper proposes the use of information fusion technology to identify different wood species by combining spectral and spatial information from hyperspectral images and terahertz (THz) spectra. The study utilized five species of coniferous wood as experimental samples. The hyperspectral and terahertz raw images and spectra acquired by the spectroscopic instruments were preprocessed using
-
Effect of drilling resistance measurement on residual load capacity of Scots pine (Pinus sylvestris L.) Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-20 Evgenii Sharapov, Aleksandr Korolev, Sergei Shlychkov, Nilson Tadeu Mascia
-
Analysis of the application status of terahertz technology in forestry Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-17 Yong Wang, Rui Gao, Lili Ma, Kenan Kang, Chao Wang, Yihong Guo, Xiaohan Ge
-
Water uptake of radiata pine wood after microwave and superheated steam treatments: sapwood vs. heartwood Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-15 Huimin Cao, Saisai Huang, Fangyu Yin, Yufa Gao, Xiaomei Liao, Songlin Yi, Yongdong Zhou
-
MUF resin incorporating SiO2 and TiO2 nanoparticles: characterization and performance as a plywood adhesive Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-13 Zhenyu Wei, Xiangnan Kong, Bin Jia, Shitao Xia, Shuguang Han
-
Preparation of activated carbon from paper black liquor lignin as high-performance electrode material Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-11 Tong Wenxuan, Liang Xinxin, Huang Fang, Chen Lihui, Wu Hui, Huang Liulian, Zhou Xiaxing
-
Effect of thermal modification of wood particles for wood-PLA composites on properties of filaments, 3D-printed parts and injection moulded parts Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-09 Daša Krapež Tomec, Matthew Schwarzkopf, Rožle Repič, Jure Žigon, Bojan Gospodarič, Mirko Kariž
-
Big data analysis on manufacturing variables affecting properties of medium density fiberboard Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-06 Seongsu Park, Byung-Dae Park, Yongku Kim
The properties of medium density fiberboard (MDF) panels manufactured by reconstituting wood fibers and binders under high temperature and pressure depend on various manufacturing variables, including wood-related parameters, adhesive-related ones, and process-related ones. This study focused on the analysis of big data (about 400 million data) of the manufacturing variables (1389 variables) of MDF
-
Preparation of sulfonated carbonaceous solid acid catalysts by fuming sulfuric acid from different lignocellulosic sources and application for the conversion of Acacia mangium wood sawdust-derived glucose and fructose into levulinic acid Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-12-01 Nguyen Thi Hue, Truong Thi Thanh, Nguyen Hoang Chung, Le Quang Dien, Phan Huy Hoang
-
Effect of moisture on the edgewise flexural properties of acetylated and unmodified birch plywood: a comparison of strength, stiffness and brittleness properties Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-30 Yue Wang, Tianxiang Wang, Roberto Crocetti, Magnus Wålinder
-
Sanding performance and failure progress of precision-shaped abrasive belt during sanding MDF Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-28 Yao Du, Biao Tian, Jian Zhang, Li Li, Hongguang Liu, Bin Luo
-
Effects of extracts on color, dimensional stability, and decay resistance of thermally modified wood Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-23 Zhenju Bi, Xiaojian Zhou, Jiang Chen, Yafang Lei, Li Yan
-
Assessing acoustic performance of cross-laminated timber floors with floor covering and air-gap Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-22 Chun-Won Kang, Byung-Sook Choi, Shaohua Zhu, Sang-Sik Jang, Kazuharu Hashitsume, Haradhan Kolya
-
Preparation and characterization of unsaturated polyester infused transparent wood composites Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-18 M. C. Anish, Krishna K. Pandey, Rakesh Kumar
-
Technological properties homogenization on sapwood and heartwood of short rotation teak wood by non-biocide method based on chemical and thermal treatments Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-18 Resa Martha, Béatrice George, Istie S. Rahayu, Philippe Gérardin, Wayan Darmawan
-
Combustion characteristics and mechanical properties of wood impregnated with a paraffinic phase change material Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-18 Jens U. Hartig, Peer Haller
-
Mechanical properties of ply-lam cross-laminated timbers fabricated with lumber and plywood Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-13 Seungmin Yang, Hyunjae Lee, Gyuwoong Choi, Seoggoo Kang
-
Combined treatment of wood with thermosetting resins and phosphorous flame retardants Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-10 Muting Wu, Lukas Emmerich, Katarzyna Kurkowiak, Holger Militz
-
Factors contributing to China’s carbon stock change in the harvested wood products trade Eur. J. Wood Prod. (IF 2.6) Pub Date : 2023-11-07 Zhijie Guan, Yaxin Zhang, Zhiyuan Guo, Yue Zhang
Trade in harvested wood products (HWPs) induces carbon stock changes between different countries. Carbon stock change significantly influences a country’s contribution to carbon removals. China is a net importer of HWPs, and the trade in HWPs has a positive contribution to China’s carbon stock. This paper empirically analyzes the factors influencing carbon stock changes. The results imply that the