样式: 排序: IF: - GO 导出 标记为已读
-
Production of Mycelium-Based Papers from Carrot Pomace and Their Potential Applications for Dye Removal J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-23 S. Najmeh Mousavi, Sunil Kumar Ramamoorthy, Minna Hakkarainen, Akram Zamani
-
Influence of Biochar on the Properties of Antibacterial PBAT/Carvacrol Films J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-23 Francesco Lopresti, Luigi Botta, Giulia Pernice, Giuliana Garofalo, Raimondo Gaglio
-
Acrylated Epoxidized Soybean Oil/Polyvinylidene Fluoride Nanocomposites: Demonstrating the Potential Role of Plant Oils in Biomedical Applications J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-23 Maryam Rahimi, Vahid Pirouzfar, Hossein Sakhaeinia
-
Preparation and Characterization of SPEEK–PVA Blend Membrane Additives with Colloidal Silica for Proton Exchange Membrane Fuel Cell J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-23 Yavuz Yagizatli, Berdan Ulas, Alpay Sahin, Irfan Ar
-
Submerged Fermentation and Kinetics of Newly Isolated Priestia megaterium for the Production of Biopolymer Curdlan J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-22 Natasha Aquinas, Ramananda M. Bhat, Subbalaxmi Selvaraj
-
Protein-Based Hybrid Scaffolds: Application in Bone Tissue Engineering J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-20 Reihaneh Teimouri, Khalil Abnous, Seyed Mohammad Taghdisi, Mohammad Ramezani, Mona Alibolandi
-
Investigating the Structural and Physicochemical Properties of Vicia ervilia Protein Isolate/Launaea acanthodes Gum Nanocomposite Film Containing Graphene Oxide Nanoparticles and Silybum marianum Extract Microcapsules J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-20 Sozhin Saray Tarkasheh, Mohammad Alizadeh, Saber Amiri, Iraj Karimi Sani
-
Biodegradable Ultra-Large Expansion and High Open-Cell PLA/PBAT Foams Fabricated by Supercritical CO2 Foaming for Selective Oil/Water Absorption J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-17 Zihui Li, Jing Jiang, Min Qiao, Yuehan Xie, Yihe Zhang, Changwei Zhu, Xiaofeng Wang, Qian Li
-
Integrated Data Modeling and Biological Evaluation of PEGylated Konjac Gum-Rosin Pentaerythritol Polymeric Nanocomposites for Enhanced Antimicrobial Performance J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-16 Ahmet Yıldız, Tarık Küçükdeniz, Merve İlgar, Razium Ali Soomro, Mohamed E. El Sayed, Selcan Karakuş
-
Submission to Journal of Polymers and the Environment Evaluation of Thermal Properties and Crystallinity in PHB-Based Systems – A DoE Approach J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-14 Katarzyna Majerczak, John J. Liggat
-
Starch-Grafted Polyacrylic Acid Copolymer with Acrylamide: An Advanced Adsorbent for Victoria Green B Dye Removal and Environmental Remediation J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-13 Iffat Ayesha Khan, Fazal Haq, Ahmed I. Osman, Mehwish Kiran, Mehreen Hashim, Sahid Mehmood, Muhammad Wajid Ullah
-
Green Synthesis and Characterization of UV-Curable Multifunctional Rosin-Based Resins via Michael Addition Reaction J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-11 Xinyang Wang, Peng Yang, Qian Wu, Ruiguo Ma, Xiaoping Rao
-
Chitosan-polyvinylpyrrolidone composite as an efficient adsorbent for eosin Y dye from aqueous solution J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-11 Ali Ghorbani Khorshidi, Aliakbar Dehno Khalaji
-
Isolation and Characterization of Starch, Cellulose, and Their Nanostructures Obtained from Commelina coelestis Willd Root J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-10 L. García-Guzmán, I. Arzate-Vázquez, G. Velazquez, D. Díaz-Bandera, M. A. García-Eleno, J. Castaño, A. Y. Guadarrama-Lezama
-
Green Synthesis of Platinum Nanoparticles Using Polymer Bio-reduction Approach and Their Photocatalytic Organic Dye Degradation J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-09 Kasula Nagaraja, Muthuraj Arunpandian, Tae Hwan Oh
-
Assessment of Lignin Residues from Bioethanol Production of Olive Stones as Green Chemical Thickener of Epoxidized Linseed Oil J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-09 E. Cortés-Triviño, C. Valencia, J. M. Franco, J. M. Oliva, P. Manzanares, M. E. Eugenio, D. Ibarra
-
Green Synthesis of Carbohydrate Polymer Based Gum Kondagogu/Hydroxypropyl Cellulose Blend Silver Nanocomposite Film and Their Antimicrobial Activity J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-09 Kasula Nagaraja, Tae Hwan Oh
-
Elucidating Furfuryl Alcohol Degradation by Pseudomonas Species and Biokinetic Study J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-09 Priyaragini Singh, Priya Rani, Kotnees Dinesh Kumar, Rakesh Kumar
-
New Tricarboxylate Plasticizers for Use in Polylactic Acid: Synthesis, Thermal Behavior, Mechanical Properties and Durability J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-07 Anthony De Bruyne, Kenneth Cerdán Gómez, Galahad O’Rourke, Mats Denayer, Jelle Vekeman, Frank De Proft, Wouter Stuyck, Jarne Leinders, Peter Van Puyvelde, Dirk De Vos
-
Synthesis, Characterization and Adsorption of Eosin Y Using New Chitosan Schiff Base Functionalized Malic Acid/Fe2O3 Composite J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-06 Pegah Eftekharazam, Aliakbar Dehno Khalaji, Ali Mokhtari, Hossein Karimian
-
Advanced IPMC Actuators Utilizing Multifaceted Platinum-Coated Sulfonated Polyvinyl Alcohol-Graphene Oxide-Nanoform ZnO Nanocomposite Membranes J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-06 Intikhab A. Ansari
-
Exploring of Cellulose Nanocrystals from Lignocellulosic Sources as a Powerful Adsorbent for Wastewater Remediation J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-05 A. S. Norfarhana, P. S. Khoo, R. A. Ilyas, N. H. Ab Hamid, H. A. Aisyah, Mohd Nor Faiz Norrrahim, V. F. Knight, M. S. A. Rani, Athanasia Amanda Septevani, Edi Syafri, Pratheep K. Annamalai
-
Effect of Ex Situ Modification of Bacterial Cellulose with Organosilane Coupling Agent on Drug Delivery Properties J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-04 Ariane Maria da Silva Santos Nascimento, Jhonatan Miguel Silva, Idglan Sá de Lima, Josy Anteveli Osajima Furtini, Sidney José Lima Ribeiro, Edvani Curti Muniz, Hernane da Silva Barud, Edson Cavalcanti Silva-Filho
-
Synthesis of Reusable CNF/Ag2Se Films as Visible-Light-Driven Photocatalysts for Photocatalytic Degradation of MB J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-04 Talaat A. Hameed, Ahmed Salama, Rabab A. Nasr
-
Unveiling the Potential of Borassus flabellifer’s Leaves Derived ZnO Nanoparticles in Augmenting the Attributes of PLA-Surface Modified Nanocellulose Bio-composite J. Polym. Environ. (IF 5.3) Pub Date : 2024-04-01 Pradnya Ghalsasi, Pavada Madhusudan Rao, S. Sruthi, V. S. Avanthi, P. Radha
The utilization of synthetic plastics has resulted in environmental and human health concerns. Consequently, there is a growing focus on developing eco-friendly alternatives like polylactic acid (PLA). Nonetheless, its drawbacks include slow crystallization, vulnerability to UV radiation, and absence of antibacterial properties. One potential strategy involves integrating nano-cellulose (NC) and metal
-
Synthesis and Properties of a Bio-based Plasticizer Derived from Fatty Acid Methyl Ester of Erucic Acid J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-30 Pravin D. Jadhav, Chetan D. Girase, Ravindra D. Kulkarni, Anand V. Patwardhan, Unnikrishnan R. Unnithan
The many applications of phthalate esters and the adverse health effects of phthalate exposure attracted a lot of attention; therefore, it became essential to find a suitable alternative to phthalate derivatives. According to current studies, epoxidized vegetable oils are one of the alternatives that are strongly suggested to replace phthalate esters since they have been demonstrated to be valid in
-
Photo-Cross-Linked Nanofibers Containing Melissa Officinalis Extract as a Novel Active Food Packaging: An Eco-Friendly Alternative for Plastic Packaging J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-30
Abstract Food packaging plays a critical role in maintaining the freshness and quality of foods by minimizing oxidation and microbial contamination. Active packaging systems based on biodegradable polymers with green production have received great attention. Here, Melissa officinalis extract (ME) with antimicrobial and antioxidant properties was incorporated into chitosan (Cs)/ polyethylene oxide (PEO)
-
The Rising Tide of Plastic Pollution: Exploring Bacillus sp. for Sustainable Microbial Degradation of Polyethylene J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-28
Abstract The global production of plastic has reached unprecedented levels, with polyethylene (PE) being one of the most widely used polymers, accounting for the largest market share. However, the extensive usage of PE has led to significant environmental challenges due to its recalcitrant nature and resistance to degradation. To address this pressing issue, effective degradation processes for PE are
-
A Novel, Clean, and Low Reagent Consumption Ultraviolet (UV) Irradiation-Plastic Flotation Process for Separating Multi-plastics J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-28
Abstract Plastic flotation is a promising process for sorting different types of plastics based on differences in wettability. Plastic surface modification is an important step to realize efficient flotation separation of mixed plastics. However, the large number of chemical reagents consumed in the plastic modification process may not only increase the process cost, but also generate new pollutants
-
Synthesis and Characterization of Poly(glycerol sebacate), Poly(glycerol succinate) and Poly(glycerol sebacate-co-succinate) J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-26 Bruno Godinho, Rosana Nogueira, Nuno Gama, Artur Ferreira
-
Efficiently Recyclable Fe-Doped ZnO/Bacterial Cellulose-Based Composite Aerogel for Photocatalytic Degradation of Methylene Blue Under Visible Light J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-26 Xutao Zhang, Weiliang Chen, Xiangqi Li
-
Selective Laser Sintering PLA/Mg Composite Scaffold with Promoted Degradation and Enhanced Mechanical J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-25 Mengqi Li, Hai Yuan, Wenhao Ding, Haocheng Du, Xiaoping Guo, Dongying Li, Yong Xu
-
Synthesis of Stimuli-Responsive Platform Based on Polyester Dendrimer Conjugated to Thermo-Sensitive Polymer Coated Nanodiamonds as Paclitaxel Drug Delivery System on MCF-7 Cell Line: An Efficient Near-Infrared Photo-Thermal Therapeutic J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-25 Arameh Jamshidpour, Marjaneh Samadi Zadeh, Homayon Ahmad Panahi, Aras Rafiee
-
Sustainable Production of Microcrystalline Cellulose Through Gas Phase Hydrolysis for Pharmaceutical Applications: Characterization and Life Cycle Assessment J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-25 Jaber Hosseinzadeh, Ali Abdulkhani, Alireza Ashori, Pimenov Sergey Dmirievich, Ali Hajiahmad, Hamid Abdolmaleki, Fubao Sun, Zahra Echresh Zadeh
-
A Review of End-of-Life Pathways for Poly(Ethylene Furanoate) and its Derivatives J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-25 Lars Silverwood, Marie Mottoul, Marie-Josée Dumont
-
Investigating the Anticancer and Antioxidant Potentials of a Polymer-Grafted Sodium Alginate Composite Embedded with CuO and TiO2 Nanoparticles J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-25 Omnia T. Nemr, Mohamed Sh. Abdel-wahab, Zeinab S. Hamza, Sayed A. Ahmed, Ashraf A El-Bassuony, Omayma F. Abdel-Gawad, Hussein S. Mohamed
-
Antibacterial Polyhydroxyurethane-Gelatin Wound Dressings with In Situ-Generated Silver Nanoparticles or Hyperthermia Induced by Near-Infrared Light Absorption J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-25
Abstract Polyhydroxyurethane (PHU) with free secondary amine groups was synthesized by reacting poly(ethylene glycol)bis-cyclic carbonate with triethylenetetramine. PHU was mixed with varying amounts of gelatin (GE) and crosslinked by reacting them with either poly(ethylene glycol)glycidyl ether (PEGDE) or 1,4-butanediol diglycidyl ether (BDDE). The tensile strength and fluid handling capacity of the
-
Improving the Co-removal Efficiency of Dyes from Water by a Novel Four-Component Chitosan Flexible Film Containing Graphene Oxide J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-23 Saed Salami, Morteza Bahram, Khalil Farhadi, Legha Ansari
-
Preparation of Antimicrobial Polybutylene Succinate/Polylactic Acid Composites with a Promoting Effect on the Growth of Green Vegetables J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-21 Jie Song, Shuang Yu, Jiaxuan Han, Rong Zhang, Xiaoyan Ma
-
Unlocking the Potential of Resveratrol-Derived Trifunctional Photosensitive Benzoxazines for Superhydrophobic, Low Dielectric and Photoluminescence Applications J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-21 Subasri Appasamy, Balaji Krishnasamy, Hariharan Arumugam, Alagar Muthukaruppan
-
Mechanical Properties of 3D-Printed Lattice Cylindrical Structure with Recyclable Elastomeric and Thermoplastic Polymers J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-20 Mohit Sood, Chang-Mou Wu, Yun-Cheng Yang
-
Biobased Immiscible Polylactic Acid (PLA): Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Impact of Rheological and Non-isothermal Crystallization on the Bead Foaming Behavior J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-12 Christian Brütting, Julia Dreier, Christian Bonten, Holger Ruckdäschel
-
Fabrication and Characterization of 3D-printed Antibacterial Bioactive Glass /Polycaprolactone Nanocomposite Scaffolds J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-10 Zahra Golniya, Mehdi Kalantar, S. A. Poursamar, Mohammad Rafienia, Pedro Miranda
-
Physico-mechanical Evaluation of Electrospun Nanofibrous Mats of Poly(3-hydroxybutyrate)/Poly(butylene succinate) Blends with Enhanced Swelling-Dynamics and Hydrolytic Degradation-Kinetics Stability for Pliable Scaffold Substrates J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-09 Harshal Peshne, Krishna Priyadarshini Das, Deepika Sharma, Bhabani K. Satapathy
-
Tuning the Structural, Mechanical, Thermal and Electrical Properties of in-Situ Polymerized Polyindole/Carboxymethyl Chitosan/Nickel Oxide Blend Nanocomposites for Energy Storage Applications J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-09
Abstract The main objective of the present study was to develop flexible conductive biopolymer blend nanocomposites using polyindole (PIN) and carboxymethyl chitosan (CMC) with various nickel oxide (NiO) nanoparticles by in-situ polymerization techniques. Different techniques were used to study the effect of NiO content on the structural, optical, morphological, thermal, mechanical and electrical characteristics
-
Automated Classification of Undegraded and Aged Polyethylene Terephthalate Microplastics from ATR-FTIR Spectroscopy using Machine Learning Algorithms J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-07
Abstract Automated analysis of microplastics is essential due to the labor-intensive, time-consuming, and error-prone nature of manual methods. Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy offers valuable molecular information about microplastic composition. However, efficient data analysis tools are required to effectively differentiate between various types of microplastics
-
Cation Effect in Polysaccharide-Based Hydrogel Beads Produced for Europium Adsorption from Aqueous Solutions J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-06 Oshrat Levy-Ontman, Shir Nagar, Ofra Paz-Tal, Adi Wolfson
-
An Investigation on Bioderived Sponges with Hemostatic and Photoluminescent Properties for Accelerating Wound Healing J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-05 Jayavardhini Bhoopathy, Weslen Vedakumari Sathyaraj, Lokesh Prabakaran, Rethinam Senthil, Vajagathali Mohammed, Sankari Dharmalingam
-
Optimization Model of Starch Nanoparticles Production Loaded with Phenolic Compounds from Green Propolis Extract J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-04
Abstract Phenolic compounds from propolis have promising food and pharmaceutical applications because of their antioxidant and antimicrobial properties. The current research aimed to optimize the production of starch nanoparticles (SNPs) loaded with phenolic compounds (P) from propolis extract. Thus, starch nanoparticles were prepared with (P-SNPs) and without phenolic compounds (SNPs) using the anti-solvent
-
Super-Tough Poly(Lactide)/Ethylene-Methyl Acrylate-Glycidyl Methacrylate Random Terpolymer Blends via Efficient Catalytic Interfacial Crosslinking of Environmentally Friendly Carboxyl-Functionalized Ionic Liquids J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-04
Abstract Interfacial compatibilization of polylactide/ethylene-methyl acrylate-glycidyl methacrylate random terpolymer (PLA/EG-MA) incompatible blends is crucial for fabricating super-tough PLA materials. To regulate and control the interfacial reaction and adhesion between PLA and EG-MA, 1-carboxymethyl-3-methylimidazole bromide salt (ILs) was selected as an interfacial compatibilizer and controller
-
Effects of Copolymer Structure on Enzyme-Catalyzed Polyester Recycling J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-04 Akanksha Patel, Allen C. Chang, Umer Abid, Christian Ayafor, Hsi-Wu Wong, Dongming Xie, Margaret J. Sobkowicz
-
Highly Stretchable Biobased Poly(butylene succinate)-Based Copolyesters with Shape Memory and Self-Healing Properties J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-04 Hsu-I Mao, Shih-Hung Chang, Ruei-Jing Chu, Hsin-Ying Lin, Chin-Wen Chen
-
Biomimetic ECM-Based Hybrid Scaffold for Cartilage Tissue Engineering Applications J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-04 Davood Yari, Jebrail Movaffagh, Mohammad Hosein Ebrahimzadeh, Arezoo Saberi, Durdi Qujeq, Ali Moradi
-
Enzymatic Self-Degradable PLA-Based Electrets J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-01 Dennis Flachs, Sergey Zhukov, Isabella Zech, Timo Schreck, Stefan Belle, Heinz von Seggern, Mario Kupnik, Alexander Anton Altmann, Christiane Thielemann
-
Design of Sponge-like Chitosan Wound Dressing with Immobilized Bacteriophages for Promoting Healing of Bacterially Infected Wounds J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-01 Anastasiya Sidarenka, Aliaksandr Kraskouski, Viktoryia Savich, Oliy Akhmedov, Viktoryia Nikalaichuk, Aliaksandra Herasimovich, Kseniya Hileuskaya, Viktoryia Kulikouskaya
-
Green Decorated Au NPs Over Arabic Gum Functionalized Reduced Graphene Oxide for the In-Vitro Study of Lung Carcinoma and Antioxidant Potential Assay J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-01 Yi Cai, Bikash Karmakar, Attalla F. El-kott, Mohamed Abdellatif Zein, Waleed Eltantawy
-
Biodegradable Cellulose and Cellulose Nanofibres-Based Coating Materials as a Postharvest Preservative for Horticultural Products J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-01 Neha Sharma, Benjamin James Allardyce, Rangam Rajkhowa, Ruchi Agrawal
-
Enhancing the Oil Adsorption Properties of Cellulose Nanofiber Aerogels Through Chemical Modification J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-01 Sara Sadat Fazel, Mehdi Jonoobi, Kambiz Pourtahmasi, Sima Sepahvand, Alireza Ashori
-
Effect of Polycaprolactone Microplastics on Soil Microbial Communities and Plant Growth J. Polym. Environ. (IF 5.3) Pub Date : 2024-03-01 Menglu Li, Qingfeng Ma, Tingting Su, Zhanyong Wang, Haibin Tong
-
Development and Investigation of Electrochemical and Dielectric Properties of Eco-Friendly Lithium-Ion Conductor Biopolymer Electrolyte for Energy Storage Application J. Polym. Environ. (IF 5.3) Pub Date : 2024-02-28 Dara M. Aziz, Rebar T. Abdulwahid, Sangar A. Hassan, Shujahadeen B. Aziz, Pramod K. Singh, Bandar A. Al-Asbahi, Abdullah A. A. Ahmed, H. J. Woo, M. F. Z. Kadir, Wrya O. Karim