样式: 排序: IF: - GO 导出 标记为已读
-
Characterization of Physical and Mechanical Properties of Tungsten Alloy Surfaces for Electroplasticity-Assisted Dry Cutting Machining Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-24 Jie Liu, Guangjun Chen, Zhiwei Yu, Xiongfei Jia, Jiashuai Huang
-
Investigation of Agitation Effects in Dry Electrochemical Polishing via Machining Characterization Using Single Solid Electrolyte Particles Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-23 Seong-Ung Kwak, Uk-Su Kim, Jeong-Woo Park
-
Highly Flexible, Conductive, and Antibacterial Surfaces Toward Multifunctional Flexible Electronics Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-22 Duygu Gazioglu Ruzgar, Semih Akin, Seungjun Lee, Julia Walsh, Hyowon Hugh Lee, Young Hun Jeong, Yongho Jeon, Seung-Yub Baek, Martin Byung-Guk Jun
-
Recent Progress in High-Efficiency Transparent Vacuum Insulation Technologies for Carbon Neutrality Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-20 Wonyeong Jung, Dohyung Kim, Seung Hwan Ko
-
Impact of Backing Plate and Thermal Boundary Conditions for High-Speed Friction Stir Welding of 25-mm Thick Aluminum Alloy 7175-T79 Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-18 Hrishikesh Das, Md. Reza-E-Rabby, Scott A. Whalen, Piyush Upadhyay, Glenn J. Grant
-
Application of Reinforcement Learning to Dyeing Processes for Residual Dye Reduction Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-16 Whan Lee, Seyed Mohammad Mehdi Sajadieh, Hye Kyung Choi, Jisoo Park, Sang Do Noh
-
Effect of Abnormal Powder Feeding on Mechanical Properties of Fabricated Part in Directed Energy Deposition Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-12 Jeongho Yang, Seonghun Ji, Du-Rim Eo, Jongcheon Yoon, Parviz Kahhal, Hyub Lee, Sang-Hu Park
-
Comparative Study of Electrically Assisted Pressure Joining of Aluminum 6061-T6 Alloys and Copper C11000 Alloys Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-10 Tu-Anh Bui-Thi, Thanh Thuong Do, Shengwei Zhang, Yijae Kim, Heung Nam Han, Sung-Tae Hong
-
Achievement of Green and Sustainable CVD Through Process, Equipment and Systematic Optimization in Semiconductor Fabrication Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-05 Song Yi Baek, Jingyu Park, Taeyoung Koh, Dohyung Kim, Jewoung Woo, Jinwoo Jung, Se Jun Park, Changsoo Lee, Chulhwan Choi
This review paper aims to outline methods and applications of green chemistry and sustainable engineering in chemical vapor deposition (CVD) for semiconductor mass production termed as green CVD. The method includes: sustainable chemical processes, efficient equipment designs and hibernation operation. Sustainable chemical process involved 40% reduction of diisopropylamino silane (DIPAS) with saturation
-
Center-injected Polishing for Efficient Slurry Utilization Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-02
Abstract Polishing is one of the most crucial finishing processes and usually consumes a sufficient slurry to achieve an ultra-fine surface. However, excess slurry consumption is environmentally costly, as it generates a large amount of wastewater. Given the growing environmental concerns, it is essential to improve the process efficiency and minimize the environmental burdens. Considering this, a
-
Influence of Nozzle Temperature on Gas Emissions and Mechanical Properties in Material Extrusion-based Additive Manufacturing of Super Engineering Plastics Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-04-01 Seong Je Park, Ji Sun Lee, Ji Eun Lee, Seung Ki Moon, Yong Son, Suk-Hee Park
Gas emissions pose significant environmental and health concerns in thermal processes involving thermoplastic polymers. This issue also extends to material extrusion (MEX) additive manufacturing (AM), which is a thermal process. Therefore, it is crucial to examine gas emissions during MEX AM. This study focused on super engineering plastics (SEPs) such as polyetheretherketone, polysulfone, and polyetherimide
-
Research on Reducing Drilling Damage of CFRP Pipe Based on Plastic Pipe Auxiliary Support Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-30 Lingyan Tang, Siwen Tang, Xinyi Qiu, Pengnan Li, Shujian Li, Changping Li, Qiulin Niu , Hailang Liu
Carbon Fiber Reinforced Polymer(CFRP) pipes are prone to damage (delamination, burrs, and tears) during the drilling process. This study analyzes the critical conditions for delamination at the drilling entrance and exit based on the initial stress of deformed fibers in CFRP pipes. On this basis, four drilling experiments were designed, namely without auxiliary support, with auxiliary support inside
-
A Study on the Coupling Effect of Draping Angle and Size of a Draped Composite Egg-Box Structure on Its Deformation Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-28 Jia-Le Che, Seung-Hwan Chang
-
Enhanced Wear Properties of an Inspired Fish-Scale Film Structure in Terms of Microstructured Self-Lubrication Induced Effects by High-Speed Laser Surface Remelting Processing Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-27 Wei Dai, Chuqiao Fang, Xiao Wu, Zhizhen Zheng, Jianjun Li
-
SDP-Based Battery Charging Controller for Hybrid Electric Vehicles in Preparation for Zero-Emission Zone Drives Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-26 Jemin Woo, Seohee Han, Changsun Ahn
-
The Energy Consumption of the Process of Joining Steel Sheets with the Use of Clinching With and Without an Additional Rivet, and Analysis of Sheet Deformation and Mechanical Strength of Joints Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-25 Jacek Mucha, Łukasz Boda, Waldemar Witkowski
-
Battery State of Health Estimation from Discharge Voltage Segments Using an Artificial Neural Network Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-23
Abstract Battery state of health (SOH) estimation is imperative for preventive maintenance, replacement, and end-of-life prediction of lithium ion batteries. Herein, we introduce a data-driven approach to state of health (SOH) prediction for battery cells using a Deep Neural Network (DNN). Our DNN model, trained on short discharge curve segments, outperforms Multilayer Perceptron (MLP) and Support
-
Exploring the Feasibility of Advanced Manufacturing for Mass Customization of Insoles in the Context of ESG Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-23 Jung Cheng, Jia-Chang Wang
-
Control of the Ionomer Contents in the Electrode Catalyst Layer for Enhanced Performance of Methanol–Water Electrolyzers for Hydrogen Production Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-22 Dong-Hoon Kang, Sungmin Kang, Seog-Young Yoon, Dong-Hyun Peck
-
Towards Sustainable Manufacturing: A Maturity Assessment for Urban Smart Factory Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-22 Seyed Mohammad Mehdi Sajadieh, Sang Do Noh
-
Digital Twin and Deep Reinforcement Learning-Driven Robotic Automation System for Confined Workspaces: A Nozzle Dam Replacement Case Study in Nuclear Power Plants Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-18 Su-Young Park, Cheonghwa Lee, Suhwan Jeong, Junghyuk Lee, Dohyeon Kim, Youhyun Jang, Woojin Seol, Hyungjung Kim, Sung-Hoon Ahn
-
Effect of Electrolyte Thickness of Thin Film Solid Oxide Fuel Cell on Nanostructure and Performance Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-15
Abstract Advances in nanotechnology have enabled solid oxide fuel cells to perform high-efficiency energy conversion at lower operating temperatures than before. In particular, the thin film electrolyte can effectively offset the drop in ion conductivity at a low operating temperature due to a reduced ion path. In this study, the performance difference of solid oxide fuel cells according to the thickness
-
Electromagnetic Joining for Multi-material Tubular Components: A Comprehensive Review Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-08 Deepak Kumar, Sachin D. Kore, Arup Nandy
-
Feasibility Assessment of Simultaneous Biaxial Test Methodology by Segmentation Approach for a Supersized Wind Turbine Blade Evaluation Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-07 Kwangtae Ha, Daeyong Kwon, Cheol Yoo, Kyuhong Kim
-
Flutter-Driven Piezoelectric Wind Energy Harvesting System Based on PVDF Nanofiber for Low Power Applications Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-07 Junseo Gu, Donghyun Lee, Heesung Park, Kwanlae Kim
-
Processing Challenges and Delamination Prevention Methods in Titanium-Steel DED 3D Printing Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-07 Alberto Andreu, Sanglae Kim, Insup Kim, Jeong-Hwan Kim, Jinhong Noh, Suhan Lee, Wonhee Lee, Pei-Chen Su, Yong-Jin Yoon
-
Experimental Study of Electro-Catalyst Loading on Flexible Polymer Electrolyte Membrane Fuel Cell Performance Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-04 Gyutae Park, Hongnyoung Yoo, Jiwon Baek, Obeen Kwon, Yoonho So, Junghyun Park, Hojae Jang, Hyoun-Myoung Oh, Seonghyeon Yang, Gyuhyeon Kim, Jaeyeon Kim, Taehyun Park
-
A Printable Flexible and Transparent Heater Applicable to Arbitrary Surfaces, Fabricable by the Soft-Contact Micropatterning of an Ionic Metal Solution Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-03-02 Minwook Kim, Hyunchan Noh, Deokyeong Jeong, Eunchang Jeong, Geonhui Jo, Mingyu Kim, Boohyeon Youn, Kwangjun Kim, Jung Hwan Seo, Jong G. Ok
-
Review of Laser-Induced Graphene (LIG) Produced on Eco-Friendly Substrates Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-02-24 Hye-ran Moon, Byunghoon Ryu
-
Dry Transfer Printed Hole Transport Layer for Hysteresis-Free Colloidal Quantum Dot Solar Cells Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-02-10 Hyung Cheoul Shim, Jung Hoon Song, Areum Kim, Hye-Mi So, Seungmin Hyun, Sohee Jeong
-
Solvothermal Synthesis of PtNi Nanoparticle Thin Film Cathode with Superior Thermal Stability for Low Temperature Solid Oxide Fuel Cells Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-02-10 Jiyoon Shin, Kittiwat Kamlungsua, Hao-Yang Li, Pei-Chen Su
-
Sound-Based Depth Estimation of Glass Microchannel in Laser-Induced Backside Wet Etching Using Wavelet Transform Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-02-08 Geun Young Kim, Dae-Seob Song, Kui-Kam Kwon, Sung-Hoon Ahn
-
Wavelet Packet Transform and Deep Learning-based Fusion of Audio-Visual Signals: A Novel Approach for Enhancing Laser Cleaning Effect Evaluation Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-02-01 Haipeng Huang, Liang Li, Shiwei Liu, Bentian Hao, Dejun Ye
-
Physicochemical Aspects of Platinum Nanoparticles (PtNPs) from Biological Synthesis: Influence of Plant Leaf Based Extracts as the Reducing Agent Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-01-31 Khanittha Ponsanti, Benchamaporn Tangnorawich, Sitakan Natphopsuk, Surachet Toommee, Chiravoot Pechyen
-
Improving the Industrial Efficiency of Recycling Aluminum Alloy Chips Using Friction Stir Extrusion: Thin Wires Production Process Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-01-29
Abstract Friction stir extrusion is one of the most promising solid-state chip recycling techniques because of its relative simplicity and high efficiency. One of the most straightforward applications for the process is the production of recycled wires to be utilized as filler material in welding or welding-based additive manufacturing processes, in order to create an industrial symbiosis link, fostering
-
Reinforcement Learning-Based Cutting Parameter Dynamic Decision Method Considering Tool Wear for a Turning Machining Process Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-01-25
Abstract Cutting parameter optimization is considered as an effective way for energy consumption saving. In the machining process, the tool wear of cutting tools varies with the rise of the number of workpieces, which has a significant effect on cutting parameters decisions. However, most of existing approaches are conducted for a single workpiece, and cannot select the optimal cutting parameters based
-
Multi-objective Optimization Strategy for Continuous Drilling Parameters of Superalloys Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-01-24 Qi Wang, Xi Chen, Qinglong An, Ming Chen, Hun Guo, Yafeng He
-
Improving mechanical properties of FSWed AA6061-T6 joint by controlling microstructural changes through utilization of stationary shoulder tool in presence of Al2O3 nanoparticles and external cooling Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-01-13 Akbar Hosseini, Alireza Fallahi Arezoudar
-
Material-Efficient Multimaterial Projection Micro-stereolithography Using Droplet-Based Resin Supply Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-01-09 Jay Tobia, Chen Yang, Jason Kim, Daehoon Han, Howon Lee
-
Modeling and Assessment of Carbon Emissions in Additive-Subtractive Integrated Hybrid Manufacturing Based on Energy and Material Analysis Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2024-01-08 ZhongXin Liu, YanHua Zhao, Qian Wang, HongYu Xing, Jie Sun
-
Infinity-Horizon Cost-Based Controller for Reducing Fuel Cell Degradation and Hydrogen Consumption in Fuel Cell Hybrid Electric Vehicles Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-12-27 Jemin Woo, Changsun Ahn
-
High Stability in Compressive and Shear Behavior of Airless Tire Using Primitive TPMS-Based Cylindrical Spoke Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-12-22 Hong-Seok Kim, Do-Yeon Kim, Jae-Won Choi, Sang-Hu Park
-
Reduction of Defects by Friction Stir Processing for Additively Manufactured Cast Aluminum Alloys (AlSiMg) Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-12-19 Sungjong Choi, Dosik Shim, Hochan Kim
In the field of metal 3D printing, in which metal powder is repeatedly layered by melting, decrease in strength and durability due to defects (pores, etc.) occurring in the layered metal is a major obstacle to commercialization. In this study, friction stir processing (FSP) was applied as a means to remove defects such as pores generated inside cast aluminum alloys fabricated using direct energy deposition
-
A Relationship Between Manufacturing Routes-Microstructure-Biotribology of Selective Laser Melted Stainless Steel 316L Under Dry and Simulated Body Fluid Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-12-19 Suryank Dwivedi, Amit Rai Dixit, Alok Kumar Das
-
Evaluation of Electrolyte Materials of Gd- and Ce-Doped Scandia-Stabilized Zirconia and Yb- and Bi-Doped Gadolinium-Doped Ceria for Highly Durable Solid Oxide Fuel Cells Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-11-30 Sanghun Lee, Kunho Lee, Jaemyung Lee, Jaeseok Lee, Taehong Kim, Joongmyeon Bae
-
Cost-Effective and Environmentally Friendly Mass Manufacturing of Optical Metasurfaces Towards Practical Applications and Commercialization Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-11-28 Junhwa Seong, Youngsun Jeon, Younghwan Yang, Trevon Badloe, Junsuk Rho
-
A Computer Simulation and Experimental Study of Weight Reduced Carbonated Soft Drink PET Bottle Manufacturing Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-11-25 Arun Saini, Dong-Hae Choi, Min-Young Lyu
-
Observations of Short- and Long-Term Mechanical Properties of Glass Fiber Reinforced Polypropylenes with Post-Consumer Recycled Materials Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-11-24 Byunghyun Kang, Donguk Kim, Joo Seong Sohn, Nocheol Park, Kwangjoo Kim, Hyeong-Jun Kim, Youngdeog Koh, Byoung-Ho Choi
-
Impacts of Environmentally Friendly Milling of Inconel-800 Superalloy on Machinability Parameters and Energy Consumption Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-11-24 Emine Şap, Üsame Ali Usca, Serhat Şap
-
Brittle–Ductile Transitions of Rubber Toughened Polypropylene Blends: A Review Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-11-19 Jung-Wook Wee, Alexander Chudnovsky, Byoung-Ho Choi
-
Precision Transition of Bicelle to Liposome as Carriers of a Hydrophilic Biologically Active Compound by Microfluidic Mixing Integrated Micro-structure Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-31 Bong Su Kang, Sunghak Choi, Shogo Taguchi, Keishi Suga, Hiroshi Umakoshi, Keesung Kim, Moonkyu Kwak, Ho-Sup Jung
-
Proton Conduction and Electrochemical Performance of La/Pr co-Doped Ceria Electrolyte in Ceramic Fuel Cell Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-27 Xinlei Yang, Fan Yang, Muhammad Afzal, Wanli Sun, Jung-Sik Kim
-
The Optimization of Energy Consumption and CO2 Emission in the Product Hazardous Substances Report Making Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-25 Chao-Chung Hsu, Chun-Cheng Lin
-
A Review on Triboelectric Nanogenerators, Recent Applications, and Challenges Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-25 Mohammadmahdi Davoudi, Chi-Yoon An, Dae-Eun Kim
-
Pyrolytic Jetting of Highly Porous Laser-Induced Graphene Fiber for Cost-Effective Supercapacitor Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-13 Dongwoo Kim, Hyunkoo Lee, Eunseung Hwang, Sukjoon Hong, Habeom Lee
-
Analysis of Fabrication Process on Direct Edge Sealing with Microwave for Vacuum Glazing Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-11 Jaekyung Kim, Youngshin Kim, Euysik Jeon
-
Effect of Grinding Parameters on Industrial Robot Grinding of CFRP and Defect Formation Mechanism Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-09 Fangyuan Wang, Shanyong Xuan, Zongyu Chang, Kai Jin, Yulong Gao, Hao Wang, Qiye Song
-
A Knowledge Graph Based Disassembly Sequence Planning For End-of-Life Power Battery Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-04 Hao Wu, Zhigang Jiang, Shuo Zhu, Hua Zhang
-
A Systematic Review on Extended Reality Applications for Sustainable Manufacturing Across the Product Lifecycle Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-10-04 Chih-Hsing Chu, Jie-Ke Pan
-
Study on Strain Energy Transfer and Efficiency in Spatial Micro-forming of Metal Int. J. of Precis. Eng. and Manuf.-Green Tech. (IF 4.2) Pub Date : 2023-09-28 Zhaojie Chen, Jin Xie, Quanpeng He, Dongsheng Ge, Kuo Lu, Chaolun Feng