样式: 排序: IF: - GO 导出 标记为已读
-
In‐Depth Analysis of the Complex Interactions Induced by Nanolayered Additives in PHBV Nanocomposites Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-23 Pablo‐Manuel Martínez‐Rubio, María‐Dolores Avilés, Ramón Pamies, Sergio‐José Benítez‐Benítez, Alejandro Arribas, Francisco‐José Carrión‐Vilches, María‐Dolores Bermúdez
New nanocomposites based on biopolymer poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) are processed via extrusion, using low content of calcined hydrotalcite (CHT) and cloisite 20A (C20A) as additives (3 wt%). The aim of this work is to characterize the thermal and viscoelastic response of the structures induced by the presence of the additives. Field‐emission scanning electron microscopy and
-
Anisotropic Lattice Thermal Conductivity in Highly Ordered PEDOT Fibers Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-22 Paolo Sebastiano Floris, Najmeh Zahabi, Igor Zozoulenko, Riccardo Rurali
When it comes to sustainable and efficient energy solutions, organic semiconductors can play an important role in thermoelectric applications, since they are non‐toxic, cheap, made of abundant chemical species, and show intrinsically low thermal conductivities. Their electrical conductivity can be optimized via doping. Yet, thermal conduction should be as low as possible and, to this end, the atomic
-
Mycelium Agrowaste‐Bound Biocomposites as Thermal and Acoustic Insulation Materials in Building Construction Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-19 Kumba Bintunia Bonga, Laura Bertolacci, Marco Contardi, Uttam Chandra Paul, Muhammad Shajih Zafar, Giorgio Mancini, Lara Marini, Luca Ceseracciu, Despina Fragouli, Athanassia Athanassiou
The predominant use of synthetic materials, such as fiberglass and polymeric foams, for thermal and acoustic insulation in the construction sector contributes to the recalcitrant waste accumulation in the environment and is not economically sustainable in the long term. This is because they are developed with linear economy standards, they are neither reusable nor recyclable, and, at their end of lifecycle
-
An Injectable Nanocomposite IPN Hydrogel Based on Gelatin Methacrylate/Alginate/COF for Tissue Engineering Applications Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-18 Samin Saleki, Saied Nouri Khorasani, Shahla Khalili, Mahshid Hafezi, Mahsa Najarzadegan, Mohammad Reza Molaviyan, Mohammad Dinari, Ali Kakapour
The primary request nowadays is for innovative and superior scaffold designs that mimic the characteristics of native tissue in cartilage tissue engineering. GelMA/Alginate (G/A) interpenetrating polymer network (IPN) has become a popular hydrogel material for tissue engineering because of its superior mechanical and biological properties. Here, to balance the properties, a hydrogel composed of G/A
-
Dual Clay Nanobrick Wall Thin Films with High Oxygen Barrier at High Humidity Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-15 Ethan T. Iverson, Hsu‐Cheng Chiang, Sarah G. Fisher, Hudson Legendre, Kendra Schmieg, Edward Chang, Jaime C. Grunlan
-
Curcumin‐Encapsulated Poly(lactic‐co‐glycolic acid) Nanoparticles: A Comparison of Drug Release Kinetics from Particles Prepared via Electrospray and Nanoprecipitation Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-15 Zahra Roshan, Vahid Haddadi‐Asl, Hanie Ahmadi, Majid Moussaei
Controlled drug release (CDR) is a significant field of research in medical sciences due to its numerous clinical advantages over traditional methods. Encapsulation of a drug in a polymeric matrix is common technique to achieve CDR. In this study, drug‐polymer particles are prepared using poly(lactic‐co‐glycolic acid) (PLGA) as the polymer and curcumin (CUR) as model drug. Two different methods, electrospray
-
-
Biomedical Efficacy of Garlic‐Extract‐Loaded Core‐Sheath Plasters for Natural Antimicrobial Wound Care Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-15 Hamta Majd, Merve Gultekinoglu, Cem Bayram, Beren Karaosmanoğlu, Ekim Z. Taşkıran, Didem Kart, Özgür Doğuş Erol, Anthony Harker, Mohan Edirisinghe
This work explores the application of Allium sativum (Garlic) extract, in the creation of novel polymeric core‐sheath fibers for wound therapy applications. The core‐sheath pressurized gyration (CS PG) technology is utilized to mass‐produce fibers with a polycaprolactone (PCL) core and a polyethylene oxide (PEO) sheath, loaded with garlic extract. The produced fibers maintain structural integrity,
-
Thiol‐Ene Photo Crosslinked PUA‐PUMA‐Based Flexible Gel Polymer Electrolyte for Lithium‐Ion Batteries Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-13 Fatmanur Uyumaz, Elmira Nurgaziyeva, Sandugash Kalybekkyzy, Memet Vezir Kahraman
-
PVDF‐Based Electrospun Nanofibers for Oil/Water Separation: A Review Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-09 Kgabo P. Matabola, Teboho C. Mokhena, Mokae F. Bambo, Thabang H. Mokhothu, Joe S. Modise, Mokgaotsa J. Mochane
-
Investigation of Mechanical Properties of Nonwoven Recycled Cotton/PET Fiber‐Reinforced Polyester Hybrid Composites Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-03 Barshan Dev, Md Ashikur Rahman, Tasnima Tazrin, Md Shahinul Islam, Anirban Datta, Md Zillur Rahman
-
Polylactic‐Acid Having MoS2 Particles for Reversible Bilayer Actuators Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-04-03 Cristobal Nolasco, Loreto Flores, Humberto Palza
-
Renewable Methacrylate Resins for 3D Printing Containing Dynamic Hydroxyester Linkages for Reprocessability Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-30 Kylian Janssen, Geraldine H.M. Schnelting, Mirte Waterink, Jarno Guit, Jerzy Hul, Chongnan Ye, Katja Loos, Vincent S.D. Voet
-
Magnetochromic Elastomer With Instant Color Changes: A Study of the Influence of Material Composition Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-28 Chonghui Li, Frederikke Bahrt Madsen, Lifei Liu, Liyun Yu, Weizhen Zhao, Anne Ladegaard Skov
-
Polyethyleneimine Controlled Impregnation of Silver Nanowires on Electrospun Ceramic Sponges Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-28 Dan Fang, Yi‐Tao Liu, Bin Ding, Andreas Greiner
-
Development and Characterization of Poly(butylene succinate‐co‐adipate)/Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with Cowpea Lignocellulosic Fibers as a Filler via Injection Molding and Extrusion Film‐Casting Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-28 Mondli Abednicko Masanabo, Amélie Tribot, Enni Luoma, Jussi Virkajärvi, Nusrat Sharmin, Morten Sivertsvik, Suprakas Sinha Ray, Janne Keränen, M. Naushad Emmambux
-
Morphological Characteristics, Properties, and Applications of Polylactide/Poly(ε‐caprolactone) Blends and Their Composites—A Review Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-24 Karabo Innocent Matumba, Teboho Clement Mokhena, Vincent Ojijo, Emmanuel Rotimi Sadiku, Suprakas Sinha Ray
-
Polydopamine as a Materials Platform to Promote Strong and Durable Interfaces in Thermoplastic Polymer‐Titanium Joints Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-19 Georgios Kafkopoulos, Joost Duvigneau, G. Julius Vancso
-
Boosting the Biodegradation and Bioactivity of PBS‐DLS Copolymers via Incorporation of PEG Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-19 Moein Zarei, Beata Michalkiewicz, Miroslawa El Fray
-
Effects of Carbon Black Surface Modification on the Morphology and Properties in Blends with Natural Rubber Studied with High‐Resolution X‐Ray Computed Tomography Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-19 Yuting Wang, Wei Jiang, Keran Zhu, Lihui Wu, Liang Chen
-
Transdermal Administration of Nanobody Molecules using Hydrogel‐Forming Microarray Patch Technology: A Unique Delivery Approach Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-18 Aaron R. J. Hutton, Melissa Kirkby, Tom Van Bogaert, Peter Casteels, Christelle Nonne, Veronique De Brabandere, Ortwin Van de Vyver, Lalit K. Vora, Ismaiel A. Tekko, Helen O. McCarthy, Ryan F. Donnelly
-
Visible Light‐Triggered Supramolecular Hydrogel Based on Cyclic Dipeptides Stabilized with Coulomb Interactions Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-16 Angelika Seliwjorstow, Marius Bach, Susanne Kirchner, Sarah Palloks, Zbigniew L. Pianowski
-
-
The Effect of a Low Degree of Fluorine Substitution on Cotton Fiber Properties Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-14 Ofir Aharon Kuperman, Peterson de Andrade, Tanguy Terlier, Jacob Judas Kain Kirkensgaard, Robert A. Field, Filipe Natalio
-
Recycling of Polyolefins for Multiple Lifecycles Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-13 Megan Matthews, Albert van Reenen
-
Preparation of Short Collagen Nanofibers for Injectable Hydrogels: Comparative Assessment of Fragmentation Methods, Physicomechanical Properties, and Biocompatibility Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-13 Ayoob Karimizade, Amir Mellati
-
Investigating the Effect of ABS on the Mechanical Properties, Morphology, Printability, and 4D Printing of PETG‐ABS Blends Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-13 Kiandokht Mirasadi, Davood Rahmatabadi, Ismaeil Ghasemi, Mohammad Khodaei, Majid Baniassadi, Mostafa Baghani
-
Electrospun PCL‐Based Materials for Health‐Care Applications: An Overview Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-13 Teboho Clement Mokhena, Mandla Brian Chabalala, Sivuyisiwe Mapukata, Asanda Mtibe, Lerato Hlekelele, Zamani Cele, Mokgaotsa Jonas Mochane, Bulelwa Ntsendwana, Toitoi Amos Nhlapo, Teboho Patrick Mokoena, Mokae Fanuel Bambo, Kgabo Phillemon Matabola, Suprakas Sinha Ray, Emmanuel Rotimi Sadiku, Katekani Shingange
-
Fabrication of Silk Fibroin‐Derived Fibrous Scaffold for Biomedical Frontiers Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-12 Mustafijur Rahman, Tanvir Mahady Dip, Md Golam Nur, Rajiv Padhye, Shadi Houshyar
Silk fibroin (SF), a natural protein derived from silkworms, has emerged as a promising biomaterial due to its biocompatibility, biodegradability, degradation rate, and tunable mechanical properties. This review delves into the intrinsic attributes of SF that make it an attractive candidate for scaffold development in tissue engineering and regenerative medicine. The distinctiveness of this comprehensive
-
The Effects of Nitrogen‐Containing Monomers on the Thermal Degradation and Combustion Attributes of Polystyrenes Chemically Modified With Phosphonate Groups Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-12 Aloshy Baby, Svetlana Tretsiakova‐McNally, Paul Joseph, Jianping Zhang, Malavika Arun
-
Investigating Dynamic Changes in 3D‐Printed Covalent Adaptable Polymer Networks Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-11 Yixuan Jia, Christoph A. Spiegel, Juliane Diehm, Daniel Zimmermann, Birgit Huber, Hatice Mutlu, Matthias Franzreb, Manfred Wilhelm, Patrick Théato, Eva Blasco, Manuel Tsotsalas
-
3D Inkjet Printing of Biomaterials with Solvent‐Free, Thiol‐Yne‐Based Photocurable Inks Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-11 Michael Kainz, Stephan Haudum, Elena Guillén, Oliver Brüggemann, Rita Höller, Heike Frommwald, Tilo Dehne, Michael Sittinger, Disha Tupe, Zoltan Major, Gerald Stubauer, Thomas Griesser, Ian Teasdale
3D inkjet printing is a fast, reliable, and non‐contact bottom–up approach to printing small and large models and is one of the fastest additive manufacturing technologies available. These attributes position inkjet printing as a promising tool for the additive manufacturing of biomaterials, for example, tissue engineering scaffolds. However, due to the stringent technical rheological requirements
-
An Investigation into the Applicability of Wideline NMR for the Determination of Oil in Waxes Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-08 Megan Esme Matthews, Heidi Duveskog, Albert Johannes van Reenen
-
Commercial Grade of P(3HB‐co‐3HHX) Final Properties Adjustment by the Modification of Cooling Conditions in the Injection Molding and Ageing Process Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-08 Juan Ivorra‐Martinez, Jaume Gomez‐Caturla, Miguel Angel Peydro, Miguel Angel Selles, Teodomiro Boronat
-
Protein-Mediated ZnO Synthesis for Self-Healing in Natural Rubber Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-07 Piriyaphron Fueangphakdee, Adun Nimpaiboon, Preeyanuch Junkong
-
Tailoring Nanostructured Cellulose for Efficient Pickering Emulsions Stabilization Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-03 Annachiara Pirozzi, Paolo Bettotti, Tiziano Facchinelli, Elvira D'Amato, Marina Scarpa, Francesco Donsì
-
High Dose Progesterone Loaded PCL-Polysorbate 80 Transdermal Fibers for Potential Application in Gynecological Oncology Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-03-03 Omar Shafi, Saurabh Phadnis, Un Hou Chan, Mohan Edirisinghe, Francis Brako
-
Hard Coatings from Soft Latexes: A Review of Routes to Overcome the Film Formation Dilemma Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-27 Nerea Jiménez, Nicholas Ballard, José M. Asua
-
Toward Sustainable Fiber‐Reinforced Polymer Composites Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-25 Iris Elser, Michael R. Buchmeiser
Fiber‐reinforced polymer composites (FRPCs) are versatile materials with applications in diverse fields such as transportation, construction, and electronics. With the composites market expected to reach 15.5 Mt by 2026, increasing the sustainability of FRPCs is imperative. The main factors driving the sustainability of FRPCs, namely end‐of‐life management and recyclability, the use of natural, bio‐based
-
Structure and Properties of Cellulose Strengthened Poly(Acrylic Acid) Hydrogels Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-25 Zihao Chen, Xuan Zhao, Yiruo Yu, Jinping Zhou
-
Reimagining Chitosan‐Based Antimicrobial Biomaterials to Mitigate Antibiotic Resistance and Alleviate Antibiotic Overuse: A Review Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-24 Khanyisile Sheer Dhlamini, Cyril Tlou Selepe, Bathabile Ramalapa, Lesego Tshweu, Suprakas Sinha Ray
-
Effect of Tulbaghia violacea‐Derived Devulcanized Rubber on the Properties of Natural Rubber/Styrene‐Butadiene Rubber Blends Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-23 Jabulani I. Mnyango, Buyiswa G. Hlangothi, Briswell Mabuto, Christopher D. Woolard, Shanganyane P. Hlangothi
-
A High‐Stretchability, Wide Detection Range, and Wide Temperature Range Ti3C2Tx MXene/Graphene Strain Sensor Based on a Buckling Structure Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-23 Yanli Wang, Wenjing Qin, Xiang Zhou, Enzhao Liu, Yutian Zhu, Shougen Yin, Wenjin Guo, Zunfeng Liu
-
Accelerating Wound Healing with Combinatorial Therapy Using Natural Melanin Nanoparticle-Polyvinyl Alcohol Blend and Core-Sheath Hybrid Nanofibers under UV-A Irradiation Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-15 Emirhan Bayrak, Pelin Yiğit, Emel Bakay, Busra Sirek, Nermin Topaloğlu, Engin Baysoy, Gizem Kaleli-Can
-
Polypyrrole Modified Granular Activated Carbon Nanocomposite for Treatment of Wastewater Containing Highly Toxic Hexavalent Chromium Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-15 Katlego Z. Setshedi, Lonji Kalombo, Nomvuyo Nomadolo, Lerato Hlekelele, Suprakas Sinha Ray, Arjun Maity
-
One-Step Solvent-Free Synthesis of Dimer Diamine-Based Autocatalytic Polyol for the Preparation of Polyurethane Foams Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-15 Büşra Nasuhoglu, Emrah Çakmakçi, Memet Vezir Kahraman
-
3D Printable Self-Sensing Magnetorheological Elastomer Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-15 Leone Costi, Antonia Georgopoulou, Somashree Mondal, Fumiya Iida, Frank Clemens
-
Super-Elastic and Dimensionally Stable Polyether Block Amide Foams Fabricated by Microcellular Foaming with CO2&N2 as Co-Blowing Agents Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-14 Haoqing Yang, Guiwei Dong, Guilong Wang, Jinchuan Zhao, Guoqun Zhao
-
Phyllanthus emblica-Loaded Cryogels for Improved Wound Care: Characterization and In Vitro Studies Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-11 İpek Canatar, Sibel Özdaş, Gözde Baydemir Peşint
-
Analyzing the Influence of Multimaterial 3D Printing and Postprocessing on Mechanical and Tribological Characteristics Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-02-05 Sinan Yilmaz, Okan Gul,, Busra Eyri, N. Gamze Karsli, Taner Yilmaz
-
Achieving Less Than 100 ppb Total Metal Ion Concentration in ESCAP Resins Synthesized by Atom Transfer Radical Polymerization Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-29 Yingchao Liu, Jinshan Wang, Weimin Li
-
High Power Sunlight-Simulated UV-Induced Radical Polymerization: Self-Initiation and Self-Crosslinking Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-24 Wenqing Yan, Jimena de la Vega, Özen Eroğlu, Lavinia Heisenberg, Deyi Wang
-
Polyetheramine-Type Semi-Biobased Long-Chain Polyamide 1210 Elastomer: Synthesis, Structure, and Unique Thermal Behavior Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-24 Xiangyang Chen, Shun Gong, Biao Zhao, Kai Pan
-
Chemorheological Kinetic Modeling of Uncatalyzed Hydroxyl-Terminated Polybutadiene and Isophorone Diisocyanate Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-24 John P. Reynolds, Tiffany N. Thompson, Cailean Q. Pritchard, Michael D. Schulz, John J. La Scala, Michael J. Bortner
-
Multifunctional Soft Actuator Based on Dielectric Liquid with Simultaneous Luminance and Weight Lifting Capabilities Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-18 Dong Jin Han, Hea Ji Kim, Byung Yang Lee
-
Ring-Opening Metathesis Polymerization-Derived Poly(dicyclopentadiene)/Fiber Composites Using Latent Pre-Catalysts Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-14 Benjamin R. Kordes, Georgios Mourgas, Mark Steinmann, Tanja Schneck, Iris Elser, Michael R. Buchmeiser
-
Novel Polycaprolactone-Chitosan Hybrid Scaffold: A Double-Sided Hernia Mesh for Regeneration of Abdominal Wall Defects with Minimized Adverse Adhesions Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-12 Zahra Asvar, Milad Fadaie, Negar Azarpira, Esmaeil Mirzaei
-
Highly Sensitive and Selective Detection of Dimethyl Methyl Phosphonate with Copolymer-Based QCM Sensors Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-07 Sadullah Öztürk, Arif Kösemen, Zafer Şen, Süha Tuna, Sahika Sena Bayazit, Necmettin Kılınç
-
Design, Processing, and Challenges of Multicomponent Polymer Composites for Improved Electromagnetic Interference Shielding Properties: A Review Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-06 Jixiang Li, Emna Masghouni, Mathis Granger, Guillaume Sudre, Pierre Alcouffe, Didier Muller, Van Son Nguyen, Bernard Bayard, Anatoli Serghei, Bruno Sauviac, Abderrahim Maazouz, Khalid Lamnawar
-
Soft and Stretchable Humidity-Insensitive Thermoresistive Temperature Sensor with A Tensile Strain Modulated Sensitivity Macromol. Mater. Eng. (IF 3.9) Pub Date : 2024-01-02 Ahmed Albeltagi, Jarkko Tolvanen, Sagar R. Bhalerao, Jari Hannu